Vivo Link VLHDMIMAT4X2 User manual

1、Connect HDMI source devices and this product
HDMI inputs with HDMI cables.
Input
2.Connect this product output to HDMI displays with
HDMI cables (select the right HDMI input channel for
displays).
Output
Installation steps
4KX2K 4 to 2 HDMI matrix User Manual
Introduction:
This 4x2 HDMI Matrix Switch is with 4 HDMI inputs and 2
HDMI outputs. It is a true matrix and can distribute any
one of 4 sources to either of 2 displays, and can work as
a splitter to show the same source on 2 displays
simultaneously. Analog R/L audio and digital SPDIF
audio can be extracted from HDMI signal. It supports
3D HDMI and 4KX2K.
Important safety instructions
1.Use DC5V power supply only. Make sure specification
matched if using adapters not supplied by factory.
2.Put this product in dry and ventilated place for normal
heat dissipation.
3.Keep this product away from strong static and magnetic
environment.
Package contents
1. Product 2. Remote control
3. User manual 4. Power adapter 5V2A
5. R/L audio+ SPDIF audio cable
6. Screws (to hang on wall)
7. IR extension receiver 
Installation requirement
1.HDTV or other display with HDMI port input.
2.HDMI video source, such as DVD,PS3,STB,PC etc.
3.High standard HDMI cable (can support 4K X 2K).
Note:
1.It requires that HDMI source(DVD, STP etc), HDMI
cable and output display device all can support 4KX2K
resolution if users need to output 4KX2K signal.
2.Do not plug and unplug HDMI cable or other cables
while working.
3.Select the right HDMI input channel for displays.
TV-Box Game Box
Laptop
DVD
HDMIDisplay
Operation notes
TV-Box Game Box
Laptop
DVD
HDMIDisplay HDMIDisplay

Trouble shooting
1.No image output.
A: Check and make sure all the devices and cables
are connected well.
B. Check and make sure the HDMI display has been
set up to the right channel.
C. Check if the matched output indicator led lights on.
D. Check if source device output HDMI signal correctly
(if it is PC or laptop, needs to be set as mirror or
extend output).
2.Output is unstable, splash screen, snowflakes or
audio stuck.
A.Check and make sure all the devices and cables are
connected well.
B.If need to transfer 4K x 2K signal, please use the
HDMI cable supported 4K x 2K.
3.Connect R/L(red/white) and SPDIF audio(black) to
earphone or other sound equipment with R/L audio
and SPDIF cable.
4.Power product on and it starts working.
5.Use remote control or the button on product to select
any of the source devices as input.
6.Users can connect IR extension receiver to this
product and switch the input signal by remote
control while installing this product into a equipment
cabinet.
Red
White
Black
Coaxial（SPDIF)
Extend Signal
Specification
Power supply DC5V / 2A
Input ports HDMI X 4
Outpurt ports HDMI X 2
Power
indicator led
Signal
indicator led
Frequency Range 25MHz - 340MHz
Max transmission
rate 3.4G X 3= 10.2Gbps
Color depth Supports 12-bit DeepFull
HD, Full 3D and 4K x 2K
video
Audio Supports standard audio
and DSD（Direct Stream
Digital ）Audio and HD
(HBR) Audio
HDMI resolution
supported
Dimension 213 X 86 x 19 mm
Net weight 390 g
Color Black
Working
temperature 0~60
480i@60Hz,480P@60Hz,
576i@50Hz,576P@50Hz,
720P@50@60Hz,1080i@
50@60Hz,1080P@50@60
Hz,3D HDMI(720P@50@
60Hz ,1080P@24Hz),3840
X 2160P@24@25@30 Hz
Yellow LED X1
Blue LED X8
Disclaimer:
The product name and brand name may be registered trade mark ofrelated
manufacturers.TM and ® may be omitted on the user manual. Thepictures
on the user manual are just for reference, and there may be some slight
difference with the real products.We reserve the rights to make changes
without further notice to a product or system described.