
2
PACKAGE CONTENTS
TOOLS NEEDED
22lbs
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
VESA Bracket
B(x1)
VESA Plate
M-A (x8)
M4x12mm Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
M-B (x4)
M4x30mm Screw
M-C (x4)
M4 Spacer
M-D (x4)
M4 Washer
M-E (x4)
M4 Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
OPTION A: Flat Back Monitor
Install VESA Plate (B) to back of Monitor using
M4x12mm Screws (M-A) and a Phillips screwdriver.
OPTION B: Curved Back Monitor
Install the VESA Plate (B) to back of Monitor using
M4x30mm Screws (M-B) and M4 Spacers (M-C)
using a Phillips screwdriver.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
BM-A
M-C
M-B
M-C