2 3
ASSEMBLY STEPS
STEP 1
A
S-A
STEP 2
Install VESA Adapter (A) to monitor using M4x12mm Screw (S-A). Ensure the arrow on adapter plate is
facing up.
Attach your monitor to your desired VESA compatible device using M4x8mm Screws (S-B) and M4
Washers (S-C) and a Phillips head screwdriver.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A (x1)
VESA Adapter
S-A (x1)
M4x12mm Screw
S-B (x4)
M4x8mm Screw
S-C (x4)
M4 Washer
A
S-CS-B
