Vivotek FD8367A User manual

User’s Manual
2MP • 720P@60fps• Day & Night • 2DNR & 3DNR • 30M IR
Fixed Dome
Network Camera
FD8369AFD8367A
Rev. 1.0

VIVOTEK
2 - User's Manual
Table of Contents
Overview ..............................................................................................................................................................3
Revision History ...............................................................................................................................................3
Read Before Use..............................................................................................................................................4
Package Contents ............................................................................................................................................4
Symbols and Statements in this Document......................................................................................................5
Physical Description ........................................................................................................................................5
Hardware Installation........................................................................................................................................7
Network Deployment ......................................................................................................................................14
Software Installation .......................................................................................................................................17
Ready to Use..................................................................................................................................................18
Accessing the Network Camera .................................................................................................................... 19
Using Web Browsers......................................................................................................................................19
Using RTSP Players.......................................................................................................................................22
Using 3GPP-compatible Mobile Devices........................................................................................................23
Using VIVOTEK Recording Software .............................................................................................................24
Main Page......................................................................................................................................................... 25
Client Settings .................................................................................................................................................. 30
Conguration.................................................................................................................................................... 35
System > General settings .............................................................................................................................36
System > Homepage layout ..........................................................................................................................38
System > Logs ...............................................................................................................................................41
System > Parameters ....................................................................................................................................43
System > Maintenance...................................................................................................................................44
Media > Image .............................................................................................................................................48
Media > Video ................................................................................................................................................59
Media > Video ................................................................................................................................................60
Network > General settings............................................................................................................................67
Network > Streaming protocols ....................................................................................................................74
Network > SNMP (Simple Network Management Protocol)...........................................................................83
Security > User accounts ...............................................................................................................................84
Security > HTTPS (Hypertext Transfer Protocol over SSL) .................................................................85
Security > Access List ..................................................................................................................................92
PTZ > PTZ settings ........................................................................................................................................97
Event > Event settings..................................................................................................................................101
Applications > Motion detection....................................................................................................................115
Applications > Tampering detection ............................................................................................................. 118
Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform) ....... 119
Recording > Recording settings ..................................................................................................................122
Local storage > SD card management.........................................................................................................127
Local storage > Content management .........................................................................................................128
Appendix ........................................................................................................................................................ 131
URL Commands for the Network Camera....................................................................................................131
Technical Specications ...............................................................................................................................320
Technology License Notice...........................................................................................................................322

VIVOTEK
User's Manual - 3
Electromagnetic Compatibility (EMC)....................................................................................................... 323
Overview
VIVOTEK’s FD8369A/8367A-V is a xed dome network camera specically designed for diverse
outdoor applications, with a 2MP sensor enabling a viewing resolution of 1920x1080 at a smooth
30 fps. Dynamic and highly adaptable, the camera is an all-in-one camera capable of capturing
high quality video at high resolutions of up to 2 Megapixels even in low light environments.
The FD8369A/8367A-V features VIVOTEK’s sophisticated Smart Stream II technology, allowing
the camera to optimize image quality for desired regions, and thus ensure maximum efciency of
bandwidth usage and savings of up to 50% on bandwidth and storage requirements.
In order to adapt to constantly changing outdoor lighting conditions, the camera features a
removable IR-cut filter as well as IR illuminators effective up to 30M for superior image quality
around the clock. For protection against harsh outdoor environments, the camera is encased in
a weather-proof IP66-rated housing, making it impervious to rain and dust. The robustness of the
camera is further strengthened by the adoption of rugged IK10 design housing.
Revision History
■ Rev. 1.0: Initial release.

VIVOTEK
4 - User's Manual
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Package Contents
■ FD8367A or FD8369A
■ Screws, anchors, waterproof cable gland, desiccant bag, double-sided tape, L wrench, QIG,
alignment sticker, software CD.

VIVOTEK
User's Manual - 5
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING: or IMPORTANT:: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.
Physical Description
Outer View
Dome cover
Camera base plate

VIVOTEK
6 - User's Manual
Many copper coated aluminum (CCA) and other non-standard conductors cabling products
are masqueraded as CAT5E or CAT6 cables. Please avoid using these CCA products
especially when cascading PoE cameras. It is a must to use Ethernet cables compliant
with the 3P/ETL standard.
IMPORTANT:
Inner View
Reset button
Lens
Cable
gland
MicroSD
card slot
IR LEDs
Ethernet
port

VIVOTEK
User's Manual - 7
Hardware Installation
2.Use the included anti-tamper key wrench to remove the dome cover.
0002D10766AD
XXXXXX
1
1.Jot down the camera's MAC address for later reference.
Ethernet
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
M8X1.25
5~6.3mm
3.Loosen and remove the waterproof connectors.
4. Insert an Ethernet cable through the cable gland, and the
rubber seal.
5. Remove part of cable sheath.
6.You will need an RJ45 crimping tool to attach the Ethernet
wires to a connector. When done, connect the cable to the
camera’s Ethernet RJ45 socket.

VIVOTEK
8 - User's Manual
7.Use the included alignment sticker to drill holes for mounting screws and a cabling hole if
applicable. Pull a CAT5e Ethernet cable through the hole.

VIVOTEK
User's Manual - 9
8.Secure the camera to wall or ceiling.

VIVOTEK
10 - User's Manual
9. Install the "Installation Wizard 2" software utility on your software CD.
10. The program will search for VIVOTEK Video Receivers, Video Servers or Network
Cameras on the same LAN.
11. Double-click on the camera's MAC address to open a browser management session
with the camera.
12. With a live view is displayed on your laptop, adjust the shooting angle, zoom and focus
to obtain an optimal image. Check the live view to ensure the image is in focus.
0002D1730202
00-02-D1-73-02-02 192.168.5.151 FD8168
IW2
Browser
LAN
350°
350°
70°

VIVOTEK
User's Manual - 11
350°
70°
FD8367A-V
13. If using the FD8367A, tune the zoom and focus using the associated pullers on
camera.

VIVOTEK
12 - User's Manual
LED Denitions
Item LED status Description
LED De`nitions
1 Steady Red Powered and system booting, or network
failed
Red LED off Power off
Green LED off Network is disconnected
2Steady Red and Green LED blinks every 1
sec.
Connected to network
3Green LED blinks every 1 sec. and RED
LED blinks consecutively every 0.15 sec.
Upgrading rmware
4Green and RED blink every 0.15 sec, Green
and RED light on, then blink again.
Restoring defaults
5RED LED is on, Green LED blinks and RED
LED is constantly on.
Status after a reset (network connected)
Green and RED LEDs are constantly on. Status after a reset (network
disconnected)
14. Attach the desiccant bag to the inner wall of the the dome cover. Secure the dome
cover by driving the anti-tamper screws.

VIVOTEK
User's Manual - 13
Hardware Reset
The reset button is used to reset the system or restore the factory default settings.
Sometimes resetting the system can return the camera to normal operation. If the system
problems remain after reset, restore the factory settings and install again.
Reset: Press the recessed reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all
settings will be restored to factory default. Upon successful restore, the status LED will
blink green and red during normal operation.
SD/SDHC/SDXC Card Capacity
This network camera is compliant with SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB and
other preceding standard SD cards.
Reset Button

VIVOTEK
14 - User's Manual
Network Deployment
General Connection (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a sin-
gle Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE-
enabled switch via Ethernet cable.
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a non-
PoE switch.
NOTE:
1. The camera is only to be connected to PoE networks without routing to outside plants.
2. For PoE connection, use only UL listed I.T.E. with PoE output.
PoE Switch
802.3af
Non-PoE Switch
PoE Power Injector
(optional)

VIVOTEK
User's Manual - 15
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 17 for
details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
P
OWE
RC
OLLIS
ION
LINK
RE
C
E
IVE
P
ARTITION
12345
Internet
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port: default is 80
■ RTSP port: default is 554
■ RTP port for video: default is 5556
■ RTCP port for video: default is 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please refer
to your router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 68 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 67 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 68 for details.

VIVOTEK
16 - User's Manual
Congure the router, virtual server or rewall, so that the router can forward any data com-
ing into a precongured port number to a network camera on the private network, and
allow data from the camera to be transmitted to the outside of the network over the same
path.
From Forward to
122.146.57.120:8000 192.168.2.10:80
122.146.57.120:8001 192.168.2.11:80
... ...
When properly congured, you can access a camera behind the router using the HTTP
request such as follows: http://122.146.57.120:8000
If you change the port numbers on the Network conguration page, please open the ports
accordingly on your router. For example, you can open a management session with your
router to congure access through the router to the camera within your local network.
Please consult your network administrator for router conguration if you have troubles with
the conguration.
For more information with network conguration options (such as that of streaming ports),
please refer to Conguration > Network Settings. VIVOTEK also provides the automatic
port forwarding feature as an NAT traversal function with the precondition that your router
must support the UPnP port forwarding feature.

VIVOTEK
User's Manual - 17
Software Installation
Installation Wizard 2 (IW2), a software included in the product CD, helps you set up your
Network Camera on the LAN.
1. Install IW2 under the Software Utility directory from the software CD.
Double-click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.
0002D1730202
00-02-D1-73-02-02 192.168.5.151 FD8367A
Installation
Wizard 2
IW
2
Network Camera
Model No: FD8367A
Made in Taiwan
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
MAC:0002D1730202
R o HS
3. The program will search for all VIVOTEK network devices on the same LAN.
4. After a brief search, the installer window will prompt. Click on the MAC and model name
that matches the one printed on the product label. You can then double-click on the address
to open a management session with the Network Camera.

VIVOTEK
18 - User's Manual
Ready to Use
1.A browser session with the Network Camera should prompt as shown below.
2.You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras. For
its installation details, please refer to its related documents.

VIVOTEK
User's Manual - 19
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN.
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1. Launch your web browser (e.g., Microsoft®Internet Explorer or Mozilla Firefox).
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. Live video will be displayed in your web browser.
4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as
shown below. Follow the instructions to install the required plug-in on your computer.
NOTE
► For Mozilla Firefox or Chrome users, your browser will use QuickTime to stream the live
video. If you don’t have QuickTime on your computer, please download it rst, then launch
the web browser.
NOTE:

VIVOTEK
20 - User's Manual
► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 84.
► If you see a dialog box indicating that your security settings prohibit running ActiveX®
Controls, please enable the ActiveX®Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX®controls; select Enable or Prompt. Click OK.
3. Refresh your web browser, then install the ActiveX®control. Follow the instructions to
complete installation.