Vivotek Ip8352 User manual

IP8352IP8352

Supreme Night Visibility • 1.3MP • 60fps

VIVOTEK

2 - User's Manual

Table of Contents

Overview.......................................................................................................................................................4

Read Before Use��5

Package Contents ��5

Symbols and Statements in this Document��5

Physical Description ��6

Hardware Installation��7

Network Deployment ��10

Network Deployment .................................................................................................................................. 11

Setting up the Network Camera over the Internet �� 11

Software Installation ��13

Ready to Use��14

Accessing the Network Camera .................................................................................................................16

Using Web Browsers��16

Using RTSP Players��18

Using 3GPP-compatible Mobile Devices��19

Using VIVOTEK Recording Software ��20

Main Page ..................................................................................................................................................21

Client Settings ............................................................................................................................................26

H�264 / MPEG-4 Media Options ��26

H�264 / MPEG-4 Protocol Options ��26

MP4 Saving Options ��27

Local Streaming Buffer Time ��27

Conguration ..............................................................................................................................................28

System > General settings ��29

System > Homepage layout ��31

System > Logs ��34

System > Parameters ��35

System > Maintenance��36

Security > User Account��40

Security > HTTPS (Hypertext Transfer Protocol over SSL) ��41

Security > Access List ��46

Security > IEEE 802�1x ��49

Network > General settings��51

Network > Streaming protocols ��59

Network > QoS (Quality of Service) ��63

Network > DDNS ��65

Manual setup ��66

Network > SNMP (Simple Network Management Protocol) ��68

Media > Image ��69

General settings ��69

VIVOTEK

User's Manual - 3

Day/Night Settings �� 70

Preference �� 71

Exposure �� 73

Privacy mask �� 76

Media > Video �� 77

Stream settings ��77

Media > Audio�� 81

Audio Settings �� 81

PTZ > PTZ settings �� 82

Digital PTZ Operation (E-PTZ Operation) �� 82

Event > Event settings �� 85

Event �� 85

Add server �� 88

Add media �� 92

Applications > Motion detection�� 98

Applications > DI and DO �� 101

Applications > Tampering detection �� 101

Recording > Recording settings �� 102

Local storage > SD card management�� 107

SD card staus �� 107

SD card control �� 107

Local storage > Content management �� 108

Searching and Viewing the Records �� 108

Search Results 1 �� 08

Appendix ................................................................................................................................................................. 110

URL Commands for the Network Camera�� 110

1� Overview �� 110

2� Style Convention �� 110

Technical Specications �� 180

Technology License Notice�� 181

MPEG-4 AAC Technology �� 181

MPEG-4 Visual Technology �� 181

AMR-NB Standard �� 181

Electromagnetic Compatibility (EMC)�� 182

VIVOTEK

4 - User's Manual

Overview

VIVOTEK IP8352 is a best-in-class 1�3-Megapixel bullet network camera designed for diverse

outdoor applications�Incorporated with a progressive scan CMOS sensor with exceptional low

lux capabilities, the IP8352 captures not only razor-sharp images of fast-moving objects during

the daytime, but also offers unparalleled night visibility under low light conditions�

Equipped with VIVOTEK’s self-developed next-generation SoC, the IP8352 supports high-

performance H�264/MPEG-4/MJPEG compression technology and offers extra smooth

video quality up to 60 fps @ 720p and 30fps @ 1�3MP�Furthermore, the IP8352 boasts a

number of innovative technologies, including Activity Adaptive Streaming and Gigabit Ethernet

Transmission, giving a user the utmost in bandwidth exibility and storage efciency.

To adapt to constantly changing lighting conditions, the IP8352 comes with a removable IR-

cut lter and built-in IR illuminators for both day and night applications. Its IP67-rated housing

protects the camera body against rain and dust and ensures operation under extreme weather

conditions� For complete installation and prevention of tampering and vandalism, the IP8352 is

also packaged with a mounting bracket that conceals all cabling�

With other advanced features such as tamper detection, 802�3af compliant PoE, MicroSD/SDHC

card slot for on-board storage, Gigabit Ethernet Transmission, plus Supreme Night Visibility and

60fps high denition video quality, the IP8352 is the best choice for the most demanding outdoor

surveillance applications such as parking lots, entrances, housing communities, and much more�

VIVOTEK

User's Manual - 5

■ IP8352 - the Network Camera

■ Alignment Sticker

■ Sun Shield, Wrench/RJ45 Female/Female

Coupler/Double-sided Tape/Screws

■ Power Adapter

■ Wall Mount Bracket & Mounting Plate

■ Waterproof Connector (Optional)

■ Moisture Absorber

■ Quick Installation Guide / Warranty Card

■ Software CD

Read Before Use

The use of surveillance devices may be prohibited by law in your country�The Network Camera is not

only a high-performance web-ready camera but can also be part of a exible surveillance system. It is

the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for

its intended use�

It is important to rst verify that all contents received are complete according to the Package Contents

listed below�Take note of the warnings in the Quick Installation Guide before the Network Camera is

installed; then carefully read and follow the instructions in the Installation chapter to avoid damage due to

faulty assembly and installation� This also ensures the product is used properly as intended�

The Network Camera is a network device and its use should be straightforward for those who have basic

networking knowledge�It is designed for various applications including video sharing, general security/

surveillance, etc�The Configuration chapter suggests ways to best utilize the Network Camera and

ensure proper operations�For creative and professional developers, the URL Commands of the Network

Camera section serves as a helpful reference to customizing existing homepages or integrating with the

current web server�

Package Contents

Symbols and Statements in this Document

i

INFORMATION: provides important messages or advices that might help prevent inconvenient

or problem situations�

NOTE: Notices provide guidance or advices that are related to the functional integrity of the

machine�

Tips: Tips are useful information that helps enhance or facilitae an installation, function, or

process�

WARNING! or IMPORTANT!: These statements indicate situations that can be dangerous or

hazardous to the machine or you�

Electrical Hazard: This statement appears when high voltage electrical hazards might occur

to an operator�

VIVOTEK

6 - User's Manual

Physical Description

IR LEDs

Lens

Light Sensor

Zoom Controller

Focus Controller

Reset Button

General I/O

Terminal Block

SD/SDHC Card Slot

General I/O Terminal Block

Gb Ethernet

RJ45 Plug

Power Cord Socket

+ AC 24V +

- AC 24V -

When inserting an SD/SDHC

card, note the orientation of

the contacts�

VIVOTEK

User's Manual - 7

Hardware Installation

1�Attach the alignment sticker to the wall�Drill three holes into the wall�Then hammer the

supplied plastic anchors into the holes and secure the plate with supplied screws�

2�Feed the cables through the front opening of the wall mount bracket�(If you want to use

external devices such as sensors and alarms, please refer to the assembling steps on the

next page�)

3�Hang the wall mount bracket on the plate�

4�Fix the Network Camera on the wall mount bracket with two screws on both sides�

5�Secure the wall mount bracket with the supplied screws�

6�Adjust the angle of the wall mount bracket to aim at the shooting area�

1

2

5

4

3

6

5

4

6

IMPORTANT!

The supplied L-type hex key wrenches are exclusively

designed to match each screw� In case you will need to

adjust the lens later, do not discard the wrenches�

VIVOTEK

8 - User's Manual

1 Power +12V

2 Digital Output

3 Digital Input

4 Ground

5 RS485 +

6 RS485 -

7 Ground

8 Audio Input

9 Ground

10 Audio Output

87654321 109

Waterproof Connector

1�Disassemble the components of the waterproof connector into part (A) ~ (F) as shown above�

2�Remove the rubber stopper from the bottom of the Network Camera and secure the rubber (A)

and screw nut (B) tightly�

3�Open the back cover of the Network Camera�

4�If you have external devices such as sensors and alarms, feed the cables through the

waterproof connector (F --> E --> C --> A+B) as the illustration shown below�Then refer to

the pin denition to connect them to the general I/O terminal block. Note: The recommended

cable gauge is 2�0 ~ 2�8 mm�

5�Push the seal (C) into the housing (E)�

6�Insert the seals (D) into the empty holes on the seal (C) to avoid moisture�

7�Secure the sealing nut (F) tightly�

8�Tighten the back cover�

9�Remove rubber (G) and feed the cables through the wall mount bracket�

Rubber (A)

Screw Nut (B)

Seal (C)

Seals (D)

Housing (E)

Sealing Nut (F)

Components of the Waterproof Connector IO Block Pin Denitions

Assembling Steps

(A)+(B)

2

6

(E)

(C)

(F)

(D)

(C)

4

7

(E)

(F)

3

(C)

5

8

9

(F)

(G)

VIVOTEK

User's Manual - 9

DI/DO Diagram

Please refer to the following illustration for the connection method�

Hardware Reset

The reset button is used to reset the system or restore the factory default settings�Sometimes

resetting the system can return the camera to normal operation�If the system problems remain

after reset, press the reset button longer to restore the factory settings and install again�

Reset: Press and release the recessed reset button with a straightened paper clip�Wait for the

Network Camera to reboot�

Restore: Press and hold the recessed reset button for at least several seconds to restore�Note

that all settings will be restored to factory defaults�

SD/SDHC Card Capacity

This network camera is compliant with Micro SD/SDHC 32GB and other preceding standard SD

cards�

12V

+12V

Digital output

PIN 1

Power+12V

PIN 2

Digital input

PIN 3

Ground

PIN 4

Reset Button

VIVOTEK

10 - User's Manual

The Network Camera is PoE-compliant, allowing transmission of power and data via a single

Ethernet cable�Follow the below illustration to connect the Network Camera to a PoE-enabled

switch via Ethernet cable�

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

Use a PoE power injector (optional) to connect between the Network Camera and a non-PoE

switch�

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

Network Deployment

When using a PoE-enabled switch

PoE Switch

RJ45 Female/

Female Coupler

When using a non-PoE switch

RJ45 Female/

Female Coupler

PoE Power

Injector

(Optional)

Non-PoE Switch

VIVOTEK

User's Manual - 11

Network Deployment

Setting up the Network Camera over the Internet

There are several ways to set up the Network Camera over the Internet� The rst way is to set

up the Network Camera behind a router� The second way is to utilize a static IP� The third way is

to use PPPoE�

Internet connection via a router

Before enabling the access to the Network Camera over the Internet, make sure you have a

router and follow the steps below�

1� Connect your Network Camera behind a router, the Internet environment is illustrated below�

Regarding how to obtain your IP address, please refer to Software Installation on page 13 for

details�

2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is

192�168�0�3, please forward the following ports for the Network Camera on the router�

■ Secondary HTTP port

■ RTSP port

■ RTP port for audio

■ RTCP port for audio

■ RTP port for video

■ RTCP port for video

If you have changed the port numbers on the Network page, please open the ports

accordingly on your router�For information on how to forward ports on the router, please refer

to your router’s user’s manual�

3� Find out the public IP address of your router provided by your ISP (Internet Service Provider)�

Use the public IP and the secondary HTTP port to access the Network Camera from the

Internet� Please refer to Network Type on page 51 for details�

IP address : 192.168.0.3

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

IP address : 192.168.0.2

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

LAN (Local Area Network)

Router IP address : 192.168.0.1

WAN (Wide Area Network )

Router IP address : from ISP

Cable or DSL Modem

L

A

N (

Local Area Network)

R

o

u

t

e

r

I

P

a

d

r

e

s

:

W

A

N (Wide Area Network )

R

o

u

t

e

r

I

P

a

d

r

e

s

:

f

r

o

m

I

S

P

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

Internet

I

P

a

d

r

e

s

:

1

9

2

.

1

6

8

.

0

.

3

S

u

b

n

e

t

m

a

s

k

:

2

5

2

5

2

5

0

VIVOTEK

12 - User's Manual

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera�

Please refer to LAN conguration on page 51 for details.

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to

PPPoE on page 49 for details�

VIVOTEK

User's Manual - 13

Software Installation

Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up

your Network Camera on the LAN�

1� Install IW2 under the Software Utility directory from the software CD�

Double click the IW2 shortcut on your desktop to launch the program�

2� The program will conduct an analysis of your network environment�

After your network environment is analyzed, please click Next to continue the program�

3� The program will search for all VIVOTEK network devices on the same LAN�

4� After a brief search, the main installer window will pop up�Double-click on the MAC address

that matches the one printed on the camera label or the S/N number on the package box label

to open a browser management session with the Network Camera�

Installation

Wizard 2

IW

2

0002D107258A

00-02-D1-07-25-8A 192.168.5.151 FD8162

0002D1083236

VIVOTEK

14 - User's Manual

Ready to Use

1� A browser session with the Network Camera should prompt as shown below�

2� You should be able to see live video from your camera�You may also install the 32-channel

recording software from the software CD in a deployment consisting of multiple cameras�For

its installation details, please refer to its related documents�

3�Unscrew the zoom controller to adjust the zoom

factor� Upon completion, tighten the zoom

controller�

4�Unscrew the focus controller to adjust the focus

range� Upon completion, tighten the focus

controller�

T

W

∞

N

3

4

VIVOTEK

User's Manual - 15

5� Tighten the lens cover�

6� Replace the moisture absorber with a new one if you open the back cover during the

installation procedure�

5

6

IMPORTANT!

12

3

Please tear down the aluminum

foil vacuum bag and take out the

moisture absorber, and then replace

it with the absorber in kit using a

double-sided tape�

NOTE:

If you want to use the supplied sun shield for outdoor environments, please follow the steps

below to install:

1� Tighten the supplied two screws�

2� Attach the supplied sun shield to the Network Camera and slide it to the desired position�

3� Fix the sun shield with the supplied two screws�

VIVOTEK

16 - User's Manual

Accessing the Network Camera

This chapter explains how to access the Network Camera through web browsers, RTSP players,

3GPP-compatible mobile devices, and VIVOTEK recording software�

Using Web Browsers

Use Installation Wizard 2 (IW2) to access the Network Cameras on the LAN�

If your network environment is not a LAN, follow these steps to access the Netwotk Camera:

1� Launch your web browser (ex� Microsoft®Internet Explorer or Mozilla Firefox)�

2. Enter the IP address of the Network Camera in the address eld. Press Enter�

3� The live video will be displayed in your web browser�

4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as

shown below� Follow the instructions to install the required plug-in on your computer�

NOTE:

For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream live video�

If you do not have Quick Time on your computer, please download Quick Time from Apple

Inc's website, and then launch your web browser�

VIVOTEK

User's Manual - 17

To enable the ActiveX®Controls for your browser:

3� Refresh your web browser, then install the ActiveX®control� Follow the instructions to

complete installation�

1� Choose Tools > Internet Options > Security

> Custom Level�

2� Look for Download signed ActiveX®controls;

select Enable or Prompt� Click OK�

NOTE:

1� By default, your Network Camera is not password-protected�To prevent unauthorized

access, it is highly recommended to congure a password for your camera later.

For more

information about how to enable password protection, please refer to Security on page 40

�

2� If you see a dialogue box indicating that your security settings prohibit running ActiveX

Controls®, please enable ActiveX Controls for your browser�

VIVOTEK

18 - User's Manual

Using RTSP Players

To view the H�264/MPEG-4 streaming media using RTSP players, you can use one of the

following players that support RTSP streaming�

Quick Time Player

Real Player

As most ISPs and players only allow RTSP streaming through port number 554, please set the

RTSP port to 554� For more information, please refer to RTSP Streaming on page 60�

For example:

4. The live video will be displayed in your player. For more information on how to congure the

RTSP access name, please refer to RTSP Streaming on page 60 for details�

1� Launch the RTSP player�

2� Choose File > Open URL� A URL dialog box will prompt�

3� The address format is rtsp://<ip address>:<rtsp port>/<RTSP streaming access name for

stream1 or stream2>

rtsp://192.168.5.151:554/live.sdp

Video 16:38:01 2011/03/25

VIVOTEK

User's Manual - 19

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network

Camera can be accessed over the Internet�For more information on how to set up the Network

Camera over the Internet, please refer to Setup the Network Camera over the Internet on page

11�

To utilize this feature, please check the following settings on your Network Camera:

1� Because most players on 3GPP mobile phones do not support RTSP authentication, make

sure the authentication mode of RTSP streaming is set to disable�

For more information, please refer to RTSP Streaming on page 60�

2� As the the bandwidth on 3G networks is limited, you will not be able to use a large video size�

Please set the video and audio streaming parameters as listed below�

For more information, please refer to Stream settings on page 77�

Video Mode MPEG-4

Frame size 176 x 144

Maximum frame rate 5 fps

Intra frame period 1S

Video quality (Constant bit rate) 40kbps

Audio type (GSM-AMR) 12.2kbps

3� As most ISPs and players only allow RTSP streaming through port number 554, please set

the RTSP port to 554� For more information, please refer to RTSP Streaming on page 60�

4� Launch the player on the 3GPP-compatible mobile devices (e�g�, Real Player)�

5. Type the following URL commands in the URL eld.

The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming

access name for stream 3>�

For example:

rtsp://192.168.5.151:554/live.sdp

VIVOTEK

20 - User's Manual

Using VIVOTEK Recording Software

The product software CD also contains recording software, allowing simultaneous monitoring

and video recording for multiple Network Cameras�Please install the recording software; then

launch the program to add the Network Camera to the Channel list�For detailed information

about how to use the recording software, please refer to the user’s manual of the software or

download it from http://www�vivotek�com�

Vivotek IP8352 User manual

Popular Security Camera manuals by other brands