FUNCTIONAL CHECK AND OPERATION ORDER
SPECIFICATIONS
230
30 W max
188 x 11 x 62
1.1
OPERATING CONDITIONS
+ 1°C + 40°C
93% 25°C
Before turning the power on, make sure that there is no misconnection or risk of short circuit.
.
The Power LEDs of the connected monitors are illuminating with green light.
A full guide on how to perform monitor settings is given in the operating instruction on your monitor.
To start video monitoring, push repeatedly the video monitoring button on the main monitor. Images from connected
cameras appear on the screen repeatedly.
When a call is made from one of the doorstations connected to the Commutator, the main monitor and additional monitor /
UKP are ringing, the screens of monitors are displaying image from the doorstation’s camera.
Pick up the handset from either of the monitors / UKP, and check duplex intercom.
To release the door lock, press and hold the button on the monitor / UKP. The door is unlocked now. After you release
the button, intercom is still available. Hang up the handset: the screen will switch off, the monitor and the Commutator
will go to stand-by.
. The monitor has over any additional device, i.e. when you pick up the
handset, the additional monitor or apartment handset UKP is disengaged.
If during intercom with one doorstation the Commutator has registered a call from the other doorstation, the Power LED
on the main monitor starts blinking. To switch to the new call, push briefly the video monitoring button on the main Monitor.
To activate the individual doorstation (i.e., start intercom and video monitoring on your initiative), push repeatedly the video
monitoring button on the main monitor, until the screen displays image from the camera you need, and then pick up the
handset.
If the multi-apartment video doorphone includes the Concierge Consol in its system, calls to the Concierge from the
main monitor are available.
push repeatedly the video monitoring button on the main monitor, until the screen displays
image from the main doorstation’s camera, and then pick up the handset. Further actions depend on the model of
your monitor. Please refer to the operating instruction on your monitor.
the C the additional m / apartment h
Mains at 50 Hz
(W)x(H)x(D)
Turn on the Commutator
Monitor settings
Video monitoring initiated from the main monitor
Calls from doorstation
Note main intercom priority main monitor’s
Simultaneous calls
Activation of individual (1-subscriber) doorstation
Calls to the Concierge
VIZIT
Note.
VAC
5mm
kg.
Check intercom with another doorstation, if any.
entrance
Calls to oncierge are not available from onitor andset .
voltage
Power consumption
Dimensions,
Weight
Ambient temperature range: to ;
Relative humidity of air: up to at .
To start a call to the Concierge,
www.vizit-group.com BKM-440 Operating Instruction (revision 11 7 72015- ) /
