ViziT BPD18/12-1-1 User manual

OPERATING INSTRUCTION
-1-1
230
Power Supply Unit (the Unit hereinafter) is a two-channel power source with unregulated output voltages
and .
The Unit is intended for operation within video doorphones. The output is used to power an
electromagnetic lock or electromechanical lock / strike, the output supplies power to a doorstations or video
monitors with no built-in power source.
The unit
gthethe
,
The mains plug shall remain readily operable.
BPD18/12
+18 VDC +12 VDC
VIZIT +12VDC
+18VDC
VIZIT
PARTS LIST
SAFETY INSTRUCTIONS
WARNING! Vcontains dangerous for life high voltage - .
Unplu the unit before replacing fuse and connecting wires.
To avoid damage or electric shock do not make any repair when the power is on.
No metallic objects shall penetrate into ventilation openings of the unit.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids shall be placed on the unit.
BPD18/12-1-1
Power Supply Unit BPD18/12-1-1 appearance
www. BPD18/12-1-1 Operating Instruction (revision 6 05)vizit-group.com 21/201 -
Operating Instruction
x1
x1
Power Supply Unit
Fasteners
Screw 4 40-х Anchor 4- 6х 0
x 4 x 4
x 1
Fuse T200AL
(1) Holes for screws
(2)
(3) Holder for fixing the Unit on a DIN-rail
(4) 12VDC and 18VDC output voltage terminals
Mains cord with plug for connection to the mains outlet
2
11
3 4

INSTALLATION
VIZIT
Output terminals shall be oriented horizontally.
G! U Make sure that no objects prevent proper
ventilation of the Unit, and the Unit’s ventilation openings are not covered or blocked.
Terminals names and destinations
SPECIFICATIONS
18V -18V 20 2
12V -12V 13.5 1.5 6
230 ± 23 VAC
W
0.17 A
mm
.kg
OPERATING CONDITIONS
The Unit shall be installed in heated premises with sufficient ventilation and securely fixed to a wall or inside the
Mounting Box
The Unit is fixed either with a springing clip to a DIN-rail (35 mm x 1-2 mm), or with screws (supplied).
Cables are connected to the Unit’s output terminals.
Output voltage across & terminals
Output voltage across & terminals
Input voltage range at 50Hz
Power consumption, max.
Current consumption, max.
Dimensions (W)x(H)x(D) x x
Weight
Ambient temperature range to
Relative humidity of air up to at
,
.
Such conditions provide proper ventilation of the unit.
WARNIN Do not mount the nit near heating equipment!
+ ( ± )VDC / 0.7A
+ ( ± )VDC / 0. A
30
165 90 60
1 1
+1°С +40°С
93% +25°С
CONNECTIONS
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM. The list
of companies is given on VIZIT.EU ( .http://vizit.eu/eurounion/)
- Drill 4 holes (1) in a wall, with diameter 6 mm and depth 40 mm
- Drive anchors (2) into the holes
Attach the Unit to the wall and fasten 4 screws in the anchors
Note. Anchors and screws are supplied
.
.
- (3) .
.
( ) Bosses on the Unit’s base
( ) rail with width mm and depth mm
( ) Holder for fixing
1-
2 - DI - 35 1-2
3-
N
BPD18/12-1-1 mounting on a railDIN-BPD18/12-1-1 mounting on a wall
12
3
1
2
3
Destination
Terminal
18VDC output voltage
+18V
12VDC output voltage
-12V
+12V
+18V
www. BPD18/12-1-1 Operating Instruction (revision 6 05)vizit-group.com 2 2/201 -
-18V
-18V-12V+12V