Vjoy LK105B User manual

LK105B Pet GPS manual
Please read this guide carefully before use so that you can use it correctly
and quickly. Product appearance, color and accessories are subject to change
without notice!
1. Products list
number
products name
count
remark
1
GPS locator
1
2
Magnet charging cable
1
3
Charger
1
4
bottom support
1
5
Instruction manual
1

2. Product function
◆Real-time tracking / AGPS assisted positioning,
◆Upload methods: timing, real-time mode;
◆Vibration dog training in multiple modes, and its own speaker;
◆Virtual fence / history track playback / displacement / low power alarm etc., alarm data
upload to cloud background.
◆Real-time health monitoring (sleep, step counting);
◆LED indicator: charging, GPS, communication, dog training status;
3. Product parameters
4. LED Indicator Definition
LED Indicator Definition
Green Indicator：GPRS/LTE signal
Status of indicator
Meaning
Flash
GSM/GPRS conversation start
Continuously in bright status
No GPRS signal
Product name
4G Pet（Dog training）GPS Tracker
Model
LK105B
Suitable Object
Dog and other medium or large-sized animals
4G Bands
FDD-LTE:B1 B2 B3 B4 B5 B7 B8 B12(17) B20 B28
TDD-LTE:B38 B39 B40 B41
WCDMA:B1 B2 B5 B8
GSM:850/900/1800M/1900
Network
GSM/GPRS/LTE
Battery
3.7V 900mAh polymer lithium battery
Start-up time
Cold start 35s-80s
Hot start 35s-80s
GPS accuracy
10m
LTE module
CPU: SC9820E
GPS
-159dBm
Operating temperature
-20℃~70℃noncondensing
operating humidity
5%-90%
storage temperature
-40℃ ～85℃
Waterproof level
IP68 Soaking 1.5m below water
SIM card
Nono-card，self-bouncing card
Dimension
70*39.5*17mm
Weight
65g

Green Led off
Power off or in sleep mode
Blue Indicator：GPS signal
Status of indicator
Meaning
Flash
GPS location successful
Continuously in bright status
GPS signal searching
Blue led off
Power off or in sleep mode
Red Indicator：Power charge and Find dog
Status of indicator
Meaning
Continuously in bright status
charging/finding
Red led off
Power off or charged full
5. Device
5.1 Open the cover of the device
5.2 Install the SIM card correctly that to active device)
Open the cover by screwdriver, Insert a nano SIM card support LTE/ GSM/GPRS
network into the slot and make sure the chip side is down.
Turn on the unit outdoors by Pushing the button to“On”the indicator is on.
(when the green light and blue light are both flashing , you can do setting by step as below:)
Set admin number,by sending a SMS command to the SIM card inside device.
For example: admin123456 +86186******** (+86186********should be your phone number)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals. The indicator will keep flashing every 3 seconds when the unit has received the

signals.
If the device is still not work on platform, pls check query parameters sms “param1”to
conform IP address .
5.3 Battery and charger
Charge the battery for 8-12 hours on the first time. Please use the charger
and battery that are configured by the manufacturer. The standard
configuration battery is a lithium battery.
Warning :
a: The battery of this product is a lithium battery that contains harmful
chemical components and may explode. Please do not force it, puncture it and
put it into fire.
b: Please charge in time to keep the equipment working properly.
6. More Commands
Function
Command Format
Reply
Delete
for example
Apn
apn+123456+space+content
apn ok
apn123456 cmnet
apnuser+123456+space+cont
ent
apnuser
ok
apnpasswd+123456+space+c
ontent
apnpassw
d ok
admin
number
admin123456+space+admi
n phone number
admin ok
noadmin
12345
admin123456
132********
time zone
timezone+123456+space+GM
T No.
timezone
ok
timezone123456 +1
Timing
mode
upload123456 10
upload ok
Value:10-3600s
Real-tine
uploading
d123456
Position
G123456# or where
google
map
Monitor
JT
Power low
alarm
LOW,1
Power save
mode
sleep123456 time
sleep
time ok
sleep123
456 off
sleep off ok

shock
sleep
sleep123456 shock
sleep
shock ok
Restart
rst
restart ok
Back to
factory
format
No reply
Language
setting
lag1
English
oK
Signal
status
status
BAT:6,
GPRS:1,GSM:2,GPS:1,ACC:0,oil:0,Power:1,S:0
Parameter
query
Param1
software version number, device ID,
domain name, APN, network signal,
security status, vibration sensitivity
Firmware
update
checkUpdate
More details command by APP , please check from app while device is online.
6. Download phone APP
Method 1: Scan above QR to download;
Method 2: search “LKGPS2”in the app store or Google play store to download.
7. Log in by website and phone APP

8.1 Log in by Website:
Open the website www.lkgps.net, choose IMEI, enter the 10-digit bar code of the
device, the default password is 123456, click “GO”to log in into the platform.
8.2 Log in by Phone APP:
Please see the following photo:
8.2.1 APP please refer to the figure below for login：
8.2.2 Select "IMEI / ID login" for the first login, select "666" for the first column of
address, input 10 digits on the device barcode, and the default password is 123456,
Click "log in" to log in
After logging in, set up and improve the user information, you can use other login
methods
Note: (1) the optional items in the address column of the first column: select "666"
for domestic users and "lkgps" for foreign users,
(2）Error "wrong user name or password" appears in the address bar, unable to log in

normally
8.2.3 How to use the interface of stand-alone software
The settings include: reminder settings (mobile phone sound and vibration settings),
password modification, skin replacement, instructions for use (multi version
instructions), log out of the current login
More settings include: command issuing (instruction 1, instruction 2, instruction 3,
instruction 4, instruction 5, instruction 6, instruction 7, instruction 8, instruction 9)
Electronic fence, equipment information (equipment name, equipment number,
expiration time, equipment model, equipment SIM card number, type, gender,
weight, age, birthday, owner name, owner phone number, icon), product description,
equipment message
Instruction: instruction 1, instruction 2, instruction 3, instruction 4, instruction 5,
instruction 6, instruction 7, instruction 8, instruction 9
Health: step counting, sleep
Note: (1) if you need to use a multi machine version of the advanced account, please
contact the equipment manufacturer. You can use it after opening the exclusive
account. The software operation interface is slightly different
8.2.4 Dog training function
2.3.1 Command setting( edit command name from APP

8.2.5 Dog Training interface Send command by short press
Rename by long press
Default
command
name
Function
Vibration type
Command 1
Weak Vibration for
0.5s
One Vibration for 0.5s
Command 2
Interval Weak
Vibration for 10s
Interval Vibration，0.5s every time，20
times,for 10s
Command 3
Medium vibration
for 0.8s
One Vibration for 0.8s
Command 4
Interval Medium
vibration for 10s
Interval vibration，0.8s every time，13 times
for 10s
Command 5
Strong vibration for
2s
One Vibration for 2s
Command 6
Interval vibration
for 10s
Interval Vibration,1.25s every time，9 times
for 10s
Command 7
“Ticking”for 0.5s
One ticking for 0.5s
Command 8
“Ticking”for 10s
Interval ticking，0.5s every time，20 times for
10s
Command 9
On：Light flashes
Off：Light turns off
8.3 How to use health monitoring interface

9.Faults & The solutions
Q：Start up Fail?
A：Check the battery charge full or not.
Q：The device can not obtain location information?
A：Place the unit at the open area to test.
Q：How to choose SIM card?
A: the SIM card must support 4G，and ensure that the card has enough currency
and credit.
Q: How to use in the foreign countries?
A：please set the APN before use，please edit the text “APN123456 CMNET “and
send it to the SIM card of the device，CMNET is Chinese operator’s APN, Replace the
corresponding APN when use in other countries, APN details, please consult your
local SIM card carrier.
10.Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside
circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or over cooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6. Don’t paint the unit, this may cause some foreign materials left in between the
parts.
7. Don’t disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer. Using other
batteries and chargers will cause unwanted situation.