Garmin DĒZL OTR810 Instruction manual

DĒZL™OTR810/OTR1010 /
LGV810/LGV1010
Quick Start Manual

Device Overview
WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
Microphone for hands-free
calling and voice command
Volume control
Power key
USB power and data port
Map and data memory card
slot
Magnetic mount interface
with 14-pin connector
Speaker
Mounting and Powering the
Device in Your Vehicle
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, store the device out of
direct sunlight.
Both the device and its mount
contain magnets. Under certain
circumstances, magnets may cause
interference with some internal
medical devices and electronic
devices, including pacemakers,
insulin pumps, or hard drives in
laptop computers. Keep the device
away from medical devices and
electronic devices.
Before you use your device on
battery power, you should charge it.
1Open the lever , press the
suction cup to the windshield,
and flip the lever back toward
the windshield.
The lever must be oriented
toward the top of the windshield.
2 Quick Start Manual

2Plug the vehicle power cable into
the port on the mount.
3If necessary, loosen the
thumbscrew on the suction cup
arm and the nut on the ball
mount , and adjust the mount
for better viewing and operation.
4Tighten the thumbscrew on the
suction cup arm and the nut on
the ball mount.
5Place the device onto the
magnetic mount.
6Plug the other end of the vehicle
power cable into a power outlet
in your vehicle.
Installing the Screw-Down
Mount on the Dashboard
Before you can attach the screw-
down ball mount to your dashboard,
you must select a suitable location
on the dashboard.
WARNING
It is your responsibility to ensure the
mounting location complies with all
applicable laws and ordinances, and
does not block your view of the road
during the safe operation of your
vehicle.
NOTICE
Avoid wires, gauges, air bags, air bag
covers, HVAC, and other items when
drilling pilot holes and attaching the
mount to the vehicle. Garmin® is
not responsible for any damages
or consequences arising from the
installation.
Quick Start Manual 3

NOTICE
To avoid possible damage to
your vehicle, Garmin recommends
professional installation of the
screw-down ball mount.
1Place the mount on the
selected location.
2Using the mount as a template,
mark the three screw locations.
3Drill pilot holes (optional).
For some types of mounting
material, drilling pilot holes is
necessary.
4Securely fasten the mount to
the surface using the supplied
screws .
5Insert the ball mount arm into
the mount.
6Insert the thumbscrew into
the mount, and tighten it to
secure the ball mount arm.
Installing the Ball Mount
Adapter
Your device includes a one-inch ball
mount that is compatible with third-
party mounting solutions.
1Remove the four screws
securing the mount socket to
the magnetic mount.
2Remove the mount socket.
3Secure the one-inch ball mount
to the magnetic mount using
the screws removed in step1.
Pairing with Your Smartphone
You can pair your dēzl device with
your smartphone and the dēzl app
to enable additional features and
access live information.
1From the app store on your
smartphone, install the dēzl app.
2Turn on your dēzl device, and
place the device and your
4 Quick Start Manual

smartphone within 3m (10ft.)
of each other.
3On your phone, open the dēzl
app.
4Follow the on-screen
instructions to sign in to a
Garmin account and complete
the pairing and setup process.
Getting the Owner's Manual
Go to garmin.com/manuals
/dezlOTR810-1010.
Viewing the Owner's Manual on
YourDevice
You can view the complete owner's
manual on the device screen in many
languages.
1Select Apps > Owner's Manual.
The owner's manual appears
in the same language as the
software text.
2Select to search the owner's
manual (optional).
Garmin Support Center
Go to support.garmin.com for help
and information, such as product
manuals, frequently asked questions,
videos, and customer support.
Device Information
Viewing E-label Regulatory and
Compliance Information
1From the settings menu, swipe
to the bottom of the menu.
2Select About Device >
Regulatory Information.
Specifications
Operating
temperature
range
From -20° to 60°C
(from -4° to
131°F)
Charging
temperature
range
From 0° to 45°C
(from 32° to
113°F)
Radio
frequency
(dēzl
OTR810 /
LGV810)
2.4GHz @ 14
dBm
Radio
frequency
(dēzl
OTR1010 /
LGV1010)
2.4GHz @ 15
dBm
Power input
Vehicle power
using the
included vehicle
power cable. AC
power using an
optional
accessory (for
home and office
use only).
Battery type Rechargeable
lithium-ion
Quick Start Manual 5

support.garmin.com
© 2022 Garmin Ltd. or its subsidiaries
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. These trademarks may not be used without the express
permission of Garmin.
dēzl™ is a trademark of Garmin Ltd. or its subsidiaries. This trademark may not be used
without the express permission of Garmin.
Printed in Taiwan
March 2022
190-02947-03_0A