VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1.1 -... User manual

Application Discovery Manager
User’s Guide
vCenter Application Discovery Manager 6.1.1
This document supports the version of each product listed and
supports all subsequent versions until the document is replaced
by a new edition. To check for more recent editions of this
document, see http://www.vmware.com/support/pubs.
EN-000453-01

VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
www.vmware.com
2VMware, Inc.
ADM User’s Guide
You can find the most up-to-date technical documentation on the VMware Web site at:
http://www.vmware.com/support/
The VMware Web site also provides the latest product updates.
If you have comments about this documentation, submit your feedback to:
[e-mail]
Copyright © 2010 VMware, Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. VMware products are covered by one or more patents listed at
http://www.vmware.com/go/patents.
VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks
and names mentioned herein may be trademarks of their respective companies.

VMware, Inc. 3
Contents
Contents 3
AboutThisBook 7
1ArchitectureOverview 9
WhatDoesADMDo? 9
EssentialConcepts 10
ADMComponents 11
ActiveProbe 11
ADMArchitectureSolutions 12
Single‐BoxSetup 12
DistributedApplianceSolutions 12
2GettingStarted 15
AccessingtheADMConsole 15
LogIntotheADMConsole 15
3ManagingADM 17
Groups 17
Discovery 17
ApplicationPatterns 18
Changes 18
Fingerprints 19
IdentifyingApplicationbyPorts 19
Aging 20
DeletingAgingLogs 21
Users 21
Role‐BasedAccessControl 21
System 22
Licensing 22
4Groups 25
Overview 25
Requirements 26
Built‐InGroups 26
User‐DefinedGroups 26
ImportingandExportingGroupDefinitions 29
5Discovery 31
DiscoveryTypes 31
DiscoveryPlans 32
PassiveDiscovery 32
Policies 32
Plans 32
IPDiscovery 32

ADM User’s Guide
4VMware, Inc.
Policies 33
DetailDiscovery 33
DetailDiscoveryTab 33
DeployingDetailDiscovery 36
DetailDiscoveryConfiguration 36
HowDoActiveProbeConfigurationsAffectDetailDiscoveryPolicies? 36
DetailDiscoveryPolicies 36
ConfiguringStandardOSAgents 37
DealingwithFirewalls 37
CheckingforResults 37
DetailDiscoveryProtocols 37
SSH 38
SNMP 39
WMI 40
Telnet 43
VI‐SDK 45
DiscoveringDependencieswithDetailDiscovery 46
ADMDependencyDiscoveryMethods 46
ChoosingaMethodofDependencyDiscovery 47
DiscoveryStrategyforUsingOnlyDetailDiscoveryforDependencies 48
VMwareDiscovery 49
VMwareTerminologyOverview 49
VMwareDiscoveryinADM 49
UseCase 50
UsingVI‐SDKforDetailDiscovery 51
Capabilities 52
6ApplicationPatterns 55
Overview 55
ApplicationPatternDefinitions 55
NodeRules 56
ConnectivityRules 56
MandatoryNodeRules 56
UnifyingNodeRules 57
ApplicationPatternInstances 58
ViewingApplicationPatternDefinitionsandInstances 58
ApplicationPatternDefinitions 58
ApplicationPatternInstances 60
ApplicationDiscoveryProcess 61
UseCase:CreatingDefinitionsandViewingtheResultingInstances 61
7Report 63
Reporttypes 63
ExportingandPrintingReports 64
8Connectors 65
ConnectorsOverview 65
EMCSmartsIntegration 65
Status 66
Configuration 67
Log 68
UnregisterADM 68

VMware, Inc. 5
Contents
CompleteSynchronize 68
DisplayingADMdatainSAM 68
CustomReports 70
9Solver 71
Overview 71
ReportsintheSolverTab 71
Index 73

ADM User’s Guide
6VMware, Inc.

VMware, Inc. 7
TheVMwarevCenter™ApplicationDiscoveryManager(ADM)User’sGuidedescribestheuserinterfaceof
theADM.Italsoprovidesinformationthatthecustomersneed,tomanagetheADM.
Intended Audience
ThisdocumentispartoftheVMwarevCenterApplicationDiscoveryManagerdocumentationset,andis
intendedforusebycorporateinformationtechnology(IT)personnelwhoneedstomonitorenterprise
applicationsandresourcesandmakedecisionsaboutacquiring,allocating,andmodifyingtheseresources.
VMware Technical Publications Glossary
VMware®TechnicalPublicationsprovidesaglossaryoftermsthatmightbeunfamiliartoyou.Fordefinitions
oftermsastheyareusedinVMwaretechnicaldocumentationgotohttp://www.vmware.com/support/pubs.
Document Feedback
VMwarewelcomesyoursuggestionsforimprovingourdocumentation.Ifyouhavecomments,sendyour
feedbackto[e-mail].
Technical Support and Education Resources
Thefollowingsectionsdescribethetechnicalsupportresourcesavailabletoyou.Toaccessthecurrentversion
ofthisbookandotherbooks,gotohttp://www.vmware.com/support/pubs.
Online and Telephone Support
Touseonlinesupporttosubmittechnicalsupportrequests,viewyourproductandcontractinformation,and
registeryourproducts,gotohttp://www.vmware.com/support.
Customerswithappropriatesupportcontractsshouldusetelephonesupportforthefastestresponseon
priority1issues.Gotohttp://www.vmware.com/support/phone_support.
Support Offerings
TofindouthowVMwaresupportofferingscanhelpmeetyourbusinessneeds,goto
http://www.vmware.com/support/services.
About This Book

ADM User’s Guide
8VMware, Inc.
VMware Professional Services
VMwareEducationServicescoursesofferextensivehands‐onlabs,casestudyexamples,andcoursematerials
designedtobeusedason‐the‐jobreferencetools.Coursesareavailableonsite,intheclassroom,andlive
online.Foronsitepilotprograms andimplementationbestpractices,VMwareConsultingServicesprovides
offeringsto helpyouassess,plan,build,andmanageyourvirtualenvironment.Toaccessinformationabout
educationclasses,certificationprograms,andconsultingservices,gotohttp://www.vmware.com/services.

VMware, Inc. 9
1
TheVMwarevCenter™ApplicationDiscoveryManager(ADM)isanenterprisedatacentermanagement
solutionthatusesagentlessdiscoveryandprovidescontinuousdependencymappingofapplications.
ADMhelpsyougainanunderstandingofyourservicedependencies.ADMalsoprovidesautomatedand
real‐timeapplicationdiscoverycapabilityacrossphysicalandvirtualenvironments.
Anaccurateapplicationdependencymapisessentialtovirtualizeapplications,movedatacenters,buildasite
recoveryplan,andtomoveaservicetothecloud.
ThischapterdescribesdifferentADMarchitecturesolutionsandalsodescribeshowtoconfigureanddeploy
them.Topicsinclude:
“WhatDoesADMDo?”onpage 9
“EssentialConcepts”onpage 10
“A D M Components”onpage 11
“A D M ArchitectureSolutions”onpage 12
What Does ADM Do?
ADMperformsthefollowinghigh‐levelfunctions:
ADMdiscoversConfigurationItems(CIs).Italsodiscoverstherelationshipsanddependenciesbetween
theseinstancesinrealtime.ThediscoverydataisstoredintheManagementDataRepository.Themap
featureintheUserInterface(UI)providesagraphicalrepresentationoftherelationshipsand
dependenciesbetweenalltheCIs.
ADMdeterminesthebaselineofusagefortheseconfigurationitems.Further,theADMdetects
inconsistenciesfromthenorm.
ADMprovidesimpactandpredictivereportingandhelpsyoutroubleshooterrors.
ADMhelpstoaccuratelyanswerthefollowingquestions:
Whathosts,applications,andconnectionsdoIhave?
HowareCIsused?
Whatarethedependenciesamongthem?
Architecture Overview 1
NOTEADMprovidesbothknownandunknowninformationaboutaninfrastructure.Ittellsyouwhat
youknow,andwhatyoudonotknow.Forexample,youmightthinkthatnolaptopsarecommunicating
withadatabaseserver.Usingthemap,youcanseethehoststhatyouknowareinyourinfrastructure.
However,youmightalsoseethattherearehostsorlaptopscommunicatingwiththedatabaseserver.
NOTEBaselineisthefirst24hoursofactivityofaconfigurationitem.

ADM User’s Guide
10 VMware, Inc.
WherearethehiddenoptimizationopportunitiesandhowcanIcapitalizeonthem?
Howwilltheseapplicationchangesimpactmybusiness?
Whataretherisks?
WhataretheproblemsandhowcanIsolvethem?
Essential Concepts
Table 1‐1definesessentialconceptsofADM.
Table 1-1. Essential Concepts
Concept Definition
ConfigurationItem(CI) ACIisahost(thiscanalsoincludenetworkdevicessuchasswitchesorrouters),an
application(alsoknownasaservice),oranetworkconnection.Forexample,aLinux
host,Ciscorouter,orVMware®ESX™ServerareallhostCIs.Oracleisanapplication
CI.HTTPandSSHarenetworkconnectionCIs.
Discovery Discoveryisacontinuousprocessthatcreatesandmaintainsadetailedmodelofyour
applicationenvironment.ADMdiscoversCIs.Chapter 5containsmoreinformation
aboutdiscovery.
ManagementData
Repository(MDR)
TheMDRisthedatabaseofADM.Whenconfigurationiteminformationis
discovered,itisstoredintheMDRafterreconciliation.
Groups Agroupisabuilt‐inoruser‐definedcollectionofoneormoreCIs.Theadminuserscan
creategroupssothattheycaneasilyview,analyze,andtrackthespecificsubsetof
data.GroupcreationallowstheadminusertoclassifyCIsintologicalsetsor
collectionssothatactionssuchascreatingreports,policies,orviewingtheinventory
isappliedtospecificgroups,insteadoftheentiredatabaseofCIs.Chapter 4contains
moreinformationaboutgroups.
Change AchangeisanychangetoaCI.Forexample,achangetoaconfigurationfileonahost
isachange.
Changetracking Changetrackingreferstoachangeinthediscoveredenvironment,suchasachange
intheamountofactivityonahost,achangeinthedemandonahostorservice,ora
newhostorconnectionthatispresentinthediscoveredenvironment.Change
trackingreferstobehavioralchanges.ADMallowsyoutocreatechangetracking
policiesthattrackbehavioralchangesinyourapplicationenvironment.
Applicationpattern ADMdiscoversbusinessapplicationsbycreatingapplicationpatterns.Theadminuser
cancreatethesefromtheManagetab,oraVMwareProfessionalServices
representativecanprovideyouthese.Anapplicationpatterndefinitionconsistsofset
ofrulesthatdescribetherequestedpattern.Thetwosetofrulesarenoderulesand
connectivityrules.ADManalyzestheapplicationpatterndefinitionanddiscovers
instancesoftheapplicationpattern.Noderulesaregroup‐likerulesthatdescribethe
instancesinthetopologygraph.Connectivityrulesdescribetheedgesinthetopology
graph(thatis,theconnectivitybetweentwoinstances).
Entityaging ADMletsyoucreateentityagingpolicies.Forexample,aservicerunninginyour
networkispopulatedintheMDR,andisthereforevisibletoyoufromtheUser
Interface(UI).Ifyouuninstallthisserviceatalatertime,youshouldnolongerseeit
asarunningserviceintheUI.Creatinganentityagingpolicyletsyouviewthemost
updatedstateofyournetwork,sinceitisaconstantlychangingenvironment.(An
entityisanetworkelement,serviceordependency,andanyoftheirderivedelements
suchasaJ2EEordatabaseinstance.)

VMware, Inc. 11
Chapter 1 Architecture Overview
ADM Components
VMwareprovidesADMononeormoreappliances.Themodeoftheappliancedetermineswhichcomponent
isrunning.ADMcomponentsaredescribedinTable 1‐2.
Active Probe
TheactiveprobeistheADMprocessusedforbothDetailandIPdiscovery.Activeproberespondstothe
policiesdefinedthroughthemanagementcomponent,discoverstheitemsassignedthroughthepolicies,and
returnsthedatatothemanagementcomponent.Thisdataisreconciled,stored,andpresentedintheconsole.
To configure the active probe
1Assign
discoveryitemstoaspecificCollector.
2Definetheprotocolsthataresupportedfordiscovery.
3 Connectthemanagementcomponent(Aggregator)tothediscoverycomponent(Collector).
TheVMwarevCenterApplicationDiscoveryManagerAdministrationGuideincludesthestepsforconfiguringthe
activeprobeforDetailandIPdiscovery.
Table 1-2. ADM Components
Component Description
ActiveDiscovery‐
Unix
Collectsdatafromtheconfigurationobjectsinyourdatacenter.Thefollowingdiscoverytypes
apply:
IPdiscovery:DetectshostsorotherconfigurationitemswithaspecificIPaddresswhen
passivediscoveryfailstodiscoverthem.
Detaildiscovery:ExtendstheinformationobtainedusingpassiveandIPdiscovery.Ituses
commonnetworkprotocolstoremotelyqueryserversinthemanagednetworkandobtains
supplementaryinformationaboutnetworkhoststhatisaddedtothedatabase.
ActiveDiscovery‐
Windows
AdiscoveryenginethatusesWMIbaseddiscoverypoliciesforperformingactivediscoveryon
Windowsmachines.
PassiveDiscovery Passivelyobservesthenetworktrafficbyperformingadeep‐packetanalysistodiscover
applicationsandcomponentrelationshipsinphysicalandvirtualenvironments.
Passivediscoveryalsoallowsyoutodothefollowing:
Mapdependencies.
Counttheactivityofthesedependencies.
Identifyservices.
Aggregator Receivesdatafromthediscoverycomponentsandreconcilesthedatabeforetransferringittothe
databasecomponent.TheaggregatoralsoprovidestheuserinterfaceforusingADMandisthe
integrationpointforvariousintegrations,forexample,ERDB.
Database AnOracleRDBMSusedtostorediscovereddataandADMconfiguration.

ADM User’s Guide
12 VMware, Inc.
ADM Architecture Solutions
ADMprovidesaSingle‐BoxsetupandDistributedsetuptomeettheneedsofdifferentenvironments.The
followingsectionscontainmoreinformationaboutthearchitecturesolutions.
Single-Box Setup
InaSingle‐Boxsetup,alltheADMmodesareenabledonasingleapplianceasshowninFigure 1‐1.
Figure 1-1. Single-Box Setup Architecture
Single-Box Appliance Configuration
IfyouareusingaSingle‐Boxsetup,youneedtoperformthestepsdescribedinVMwarevCenterApplication
DiscoveryManagerAdministrationGuide.
VMwarevCenterApplicationDiscoveryManagerAdministrationGuidealsodescribeshowtomoveanexisting
Single‐BoxsetuptoaDistributedsetuporDistributedwithremotedatabasesetup.
Distributed Appliance Solutions
ADistributedappliancesolutionhasthefollowingtwooptions:
Distributedsetup
Distributedwithremotedatabasesetup
Distributed Setup
TheDistributedsetuphasatleastonedesignatedapplianceenabledasaCollector,andanotherappliance
enabledasanAggregatorandDatabaseasshowninFigure 1‐2.
Database
All modes
Database
Aggregator
Collector
Management
Passive
Detail
Discovery

VMware, Inc. 13
Chapter 1 Architecture Overview
Figure 1-2. Distributed Setup Architecture
Distributed Appliance with Remote Database Solution
InaDistributedwithremotedatabasesetup,thereisadesignatedappliancetohostthedatabaseasshownin
Figure 1‐3.
Figure 1-3. Distributed with Remote Database (Split)
ThestepstoconfiguredistributedsetupanddistributedwithremotedatabasesetuparedescribedinVMware
vCenterApplicationDiscoveryManagerAdministrationGuide.
NOTEPassiveandDetailDiscoverycanrunonsingleormultipleCollectors.
NOTEPassiveandDetailDiscoverycanrunonsingleormultipleCollectors.
Discovery
Database
Management
passive
discovery
detail
discovery
Discovery
Aggregator Database
Collector
passive
discovery
vCollector
Discovery
Database
Management
passive
discovery
detail
discovery
Discovery
Aggregator Database
Collector
passive
discovery
vCollector
passive
discovery
detail
discovery
Discovery
Collector

ADM User’s Guide
14 VMware, Inc.

VMware, Inc. 15
2
ThischapterdescribesaccessingtheADMconsole.Topicsinclude:
“A c c e s s i n g theADMConsole”onpage 15
“LogIntotheADMConsole”onpage 15
Accessing the ADM Console
TheADMConsoleistheGraphicalUserInterface(GUI)toaccessandmanagetheapplianceprocesses.You
connecttotheADMconsoleusingabrowser.
Log In to the ADM Console
To log in to the system using the ADM Console
1OpenMicrosoftInternetExplorer
2TypetheIPaddressofthemanagementapplianceintotheURLandclickGo.TheWelcomescreen
appears.
3IntheUsernamefield,typeyourusername.
4InthePasswordfield,typeyourpassword.
5ClickLogin.
Getting Started 2
NOTEBeforerunningtheADMConsole,verifythattheMicrosoftWindowsclientmeetsthesystem
requirementsoutlinedintheVMwarevCenterApplicationDiscoveryManagerAdministrationGuide.
NOTETheadminusercanloginbytypingadminintheUsernamefieldand123456inthePasswordfield.

ADM User’s Guide
16 VMware, Inc.

VMware, Inc. 17
3
ThischapterdescribestheManagetabthatenablesyoutocreate,edit,anddeletegroups,policies,fingerprints,
andusers.Youcanrundiscoveryandmanagethesystemfromthistab.Also,itallowsyoutocreateand
manageapplicationpatternsandagingpolicies.Topicsinclude:
“Groups”onpage 17
“Discovery”onpage 17
“ApplicationPatterns”onpage 18
“Changes”onpage 18
“Fingerprints”onpage 19
“A g i n g ” onpage 20
“Users”onpage 21
“System”onpage 22
Groups
TheManagetabopenstotheGroupstabbydefault.Agroupisabuilt‐inoruser‐definedcollectionofoneor
moreCIs.ADMprovideswiththeabilitytocreategroupssothatyoucaneasilyview,analyze,andtrackthe
specificsubsetofdata.GroupcreationallowsyoutoclassifyCIsintologicalsetsorcollectionssothatactions
suchascreatingreports,policies,orviewingtheinventoryisappliedtospecificgroups,insteadoftheentire
databaseofCIs.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
performtheseactions.
Discovery
Discoveryisacontinuousprocessthatcreatesandmaintainsadetailedmodelofyourapplication
environment.ADMdiscoversCIs.
InADM,therearethreetypesofdiscovery:PassiveDiscovery,IPDiscovery,andDetailDiscovery.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
performdiscovery.
Managing ADM 3
NOTETheManagetabisvisibleonlytoadminuser.
IMPORTANTOnlyadminuserscancreategroupsfromManage>Groups.Chapter 4providesmore
informationonADMgroups.
NOTEChapter 5providesmoreinformationondiscovery.

ADM User’s Guide
18 VMware, Inc.
Application Patterns
ADMdiscoversbusinessapplicationsbycreatingapplicationpatterns.Anapplicationpatterndefinition
consistsofsetofrulesthatdescribetherequestedpattern.Thetwosetofrulesarenoderulesandconnectivity
rules.
ADManalyzestheapplicationpatterndefinitionanddiscoversinstancesoftheapplicationpattern.Node
rulesaregroup‐likerulesthatdescribetheinstancesinthetopologygraph.Connectivityrulesdescribethe
edgesinthetopologygraph(thatis,theconnectivitybetweentwoinstances).
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpcontainstask‐basedinformationonapplication
patterns.
Changes
ADMallowsyoutocreatepoliciesthathelpyoutrackapplicationbehaviorandalertsyouwhenchangesoccur
inyourenvironment.Thesechangesmightbedemandchanges,suchasahighernumberoftransactionsfora
service,orbehaviorchangessuchasnewclientsaccessingaserviceornewservicesaddedintotheapplication
environment.
Achangetrackingpolicyisarulethatgovernswhathappenswhenaspecifiedchangeoccursamongthe
discovereditemsinagroup.Agroupcanhavemultiplepoliciesdefinedforit.Changetrackingpoliciesrun
onlyafterthesystemisinthemonitoringstage,aftercompletingdiscovery.
ChangepoliciesaredisplayedintheChangeTrackingPoliciesList.Toaccessthislist,navigatetoManage>
Changes.Table 3‐1listsanddescribestheinformationintheChangeTrackingPoliciesList.
Clickonthetopofthecolumntosortthelistbythatcolumn.
Toviewchangesintheenvironment,navigatetoChangeTracking>Changes.Thechangesthataredefined
intheManage>ChangestabareactuallydisplayedintheChangeTracking>Changestab.
ChangesarealsodisplayedintheDashboard>Changespane.
YoucanperformthefollowingactionsthatareaccessedfromtheActionsmenuontheleftsideofthescreen:
AddPolicy:Createsanewchangetrackingpolicy.
CopyPolicy:Makesacopyofanexistingchangetrackingpolicy.
EditPolicy:Modifiesanexistingchangetrackingpolicy.
DeletePolicy:Removesachangetrackingpolicy.
IMPORTANTTheadminusercancreateapplicationpatternsfromtheManagetab,oraVMwareProfessional
Servicesrepresentativecanprovidethesetoyou.Chapter 6providesmoreinformationonapplication
patterns.
Table 3-1. Change Tracking Policies List
Column Description
Active Thisboxhasagreenflagforanactivepolicyandagreyflagforaninactivepolicy.Anactive
policygenerateschangenotifications.
Name Nameassignedtothechangetrackingpolicywhenyoucreatedit.
Description Changetrackingpolicydescription.
CreatedBy Usernameofthepersonwhocreatedthischangetrackingpolicy.
CreationDate DatethischangetrackingpolicywasoriginallycreatedontheADMappliancewherethis
changetrackingpolicyisdefined.
UpdatedBy Usernameofthepersonwholastmodifiedthischangetrackingpolicy.
UpdateDate Datethispolicywaslastmodified.ThedateisfortheADMappliancewherethispolicyis
defined.

VMware, Inc. 19
Chapter 3 Managing ADM
EnablePolicy:Enablesachangetrackingpolicy.
DisablePolicy:Disablesachangetrackingpolicy.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
performtheseactions.
Setting Up Scripts
YoucanconfigureachangetrackingpolicytorunascriptontheADMapplianceinresponsetoanalert.
TheADMconsolecanrunanyscriptthatcanrunonaLinux‐basedcomputer.Youcanwriteascriptforeach
changetrackingpolicy,orthesamescriptforseveralchangetrackingpolicies.Whenyouspecifyascript,the
changetrackingpolicyautomaticallyrunsitwhenevertheselectedchangeeventoccurs.Forexample,ifyou
wanttowriteascriptthatpagestheappropriatepersonorgrouptonotifythemofthechangeevent.
Thescript:
Needstobeinthe/home/nlayers/Seneca/custom_scriptsdirectory.
CanbeanyscriptthatcanrunonaLinux‐basedcomputer.
Runsinaseparateprocess.
RunsundertheADMuseraccount.Thisaccountdoesnothaverootpermissions.Itisjustaregularuser
account.
Canbeanyscriptthatcanperformalltheoperationsonthenetworkfromtheinterface.Thisdependson
thenetworkstructureandpermissions,butusuallythereisnointernetaccessandlimitedaccesstoother
resourcesonthenet.
Invokesotherprogramsinstalledontheappliance.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
setupascripttoautomateachangeresponse.
Fingerprints
FingerprintsarethecoreoftheADMbusinessapplicationdiscovery.Theyuniquelyidentifybothpackaged
andcustomdevelopedin‐houseapplications.
Identifying Application by Ports
Fingerprintsenableyoutoidentifycustomapplicationsbytheportstheyuse.Whenacustomserviceor
connectionthatmatchesadefinedfingerprintisdiscovered,itappearswiththeservice/connectionnamethat
yousupplied,insteadofanunclassifiedserviceorconnection.WhenyounavigatetoManage>Fingerprints,
alistofalldefinedfingerprintsappears.
Thefingerprintslistcontainstheinformationforeachfingerprint,asshowninTable 3‐2.
Table 3-2. Fingerprints List
Column Description
Port Portthatthisservice/connectionuses.
Transport Methodoftransportthattheportcoulduse,eitherTCPortheUserDatagramProtocol(UDP).
Protocol Communicationsprotocolyourservice/connectionuses.
Service Nameoftheservicethatyoucreatedtousethisport.

ADM User’s Guide
20 VMware, Inc.
YoucanperformthefollowingactionsfromtheActionspaneontheleftsideofthescreen:
AddFingerprint:Createsanewfingerprint.
EditFingerprint:Modifiesanexistingfingerprint.
DeleteFingerprint:Removesafingerprint.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
performtheseactions.
Aging
ADMallowsyoutocreateentityagingpolicies.Agingistheremovalofaninactiveentityanditsowned
entitiesfromADM.Aninactiveentityisanetworkelement,service,ordependency,andanyoftheirderived
elements,suchasaJ2EEordatabaseinstancethathavenotbeenverifiedasliveforsomepredefinedamount
oftime.Forexample,aservicerunninginyournetworkispopulatedintheMDR,andisthereforevisibleto
youthroughtheADMconsole.Ifthisserviceisuninstalledatalatertime,itshouldnolongerbeshownasa
runningserviceintheADMconsole.Creatinganentityagingpolicyallowsyoutoviewthemostupdatedstate
ofyournetwork,sinceitisaconstantlychangingenvironment.
Agingisperformedthroughagingpolicies.Whenyoucreateanewagingpolicy,thedefaulttimelimitisseven
days.YoucanchangethisdefaultasdescribedintheVMwarevCenterApplicationDiscoveryManagerOnlineHelp
TheAgingPolicieslistcontainsgeneralinformationaboutexistingagingpolicies.ToaccesstheAgingPolicies
list,selectManage>Aging.TheAgingPolicieslistisshownbelow.
ClickonthetopofacolumnontheAgingPolicieslisttosortthelistbythatcolumn.
Youcanperformthefollowingactionswithagingpolicies:
AddPolicy:Createsanewagingpolicy.
CopyPolicy:Makesacopyofanexistingagingpolicy.
EditPolicy:Modifiesanexistingagingpolicy.
DeletePolicy:Removesanagingpolicy.
EnablePolicy:Enablesanagingpolicy.
DisablePolicy:Disablesanagingpolicy.
TheVMwarevCenterApplicationDiscoveryManagerOnlineHelpprovidesstep‐by‐stepinstructionsonhowto
performtheseactions.
Table 3‐3listsanddescribestheagingpolicyinformationintheAgingPolicieslist.