Vogel QZ80 User manual

User manual for the QZ device
from VOGEL, the latest device
to detect and distinguish
between different metals.
QZ
www.vogeldetectors.com
User Manual
Metal and Water Finder

page 1
page 2
page 3
page 8
page 9
page 10
page 13
page 15
page 22
page 23
page 5
page 16
page 19
page 21
Index
Technical Specications
Important notes
Main unit
Getting started
setting
page 11
Main Unit setup and start working
search setting
Manual search settings
Pinpoint detection
page 25
Depth Mode
page 26
Charging
page 27
Notes
Introduction
page 6
page 7
Characteristics
Device components
Calibration
page 17
Search Modes
page 18
General Mode
Treasures Mode
Search mode for nuggets and coins
Assembly
Page 1

The user strips himself of metal, such as rings watch, or a metal belt
Do not store the device in a place with high temperatures and
humidity.
Page 2
The user should practice on how to use the device before setting off
for detection and search operations.
The user should practice how to use the device before setting off for
detection and search operations.
The device must be connected to the searching coil during
operation
In the case of tampering with the device, the device will lose its
security.
IMPORTANT NOTES

TECHNICAL SPECIFICATIONS
search for: Searching for metals, gold and blanks.
searching system:
Very low frequency VLF system
Operator
mikrocontroller
Operating system
A system for measuring and processing levels of the electromagnetic field formed
around the target and the receiver through the reception coil in the search coil,
analyzing these results and showing them through sound alerts and color graphic
indicators on the screen.
NO
Whireless
Sound alert YES
vibration alert NO
Three cells Li-ion 3.7 V, 3000 mA Power output 8.4 V
NO
Automated and intelligent
guidance system:
working hours 10 hours
Power
Charger 12 volts 2 amps / charging time 2 hours
Display 3.5 inch color TFT screen.
Page 3

:نزﻮﻟا
Operating temperature:
From -15 °C to 60 °C
storage temperature:
From -15 °C to 40 °C
Humidity :
Bag dimensions:
It can be stored and operated at an average air
humidity of 5% to 80%.
weight:
Dimensions:
Page 4
5 Kg
66X41X17 cm
4.6X5.7X9 cm

The QZ80, produced by the German company VÖGEL, is one of the company's
best in metal detector technology. This device is characterized by different
systems and multiple search options in order to reach the most accurate results
in the search for targets. The QZ80, through its unique search systems,
facilitates the work of prospectors and shortens the effort and time spent during
difficult excavations through various analysis algorithms of the earth to reveal
the contents of the soil and its different targets. It is also characterized by
advanced search settings that allow to ignore unwanted targets during the
search, which facilitates the work of prospectors.
The QZ80 is equipped with four different search modes for each system.
Individual features to display search results on the screen through interactive
graphical interfaces and alerts.
General search mode.
- Treasures Mode
- coins and nuggets mode.
- Depth mode
The device allows the user to adjust the search settings to suit the search
requirements:
Desensitization to iron.
- Increase or decrease the sensitivity in proportion to the electromagnetic
nature of the soil.
Increasing or decreasing the gain of the reception file in the search disk in
proportion to the nature of the soil.
Introduction
ًُ
Page 5

Dear customer, we appreciate your trust in us and your acceptance of a new
and unique experience in the world of metal detectors by owning one of our
products.
The QZ80 has a number of features including:
- The special design of the Double D-shaped search coil to avoid magnetic
anomalies caused by metallic minerals.
- The ability to isolate mineral and rocky soils (cancellation of magnetic noise)
without affecting sensitivity, thus giving greater effectiveness and a more
accurate allergic field during the research.
- Complete the search task without interruption due to the unique feature in the
number of continuous working hours, which
Up to ten hours straight.
Fast Charging: The QZ80 only needs 2 hours to fully charge.
- High-resolution color interactive interfaces to give the search process a lively
character.
-When you acquire the QZ80 device, you do not need to calibrate the soil for the
same search area every time you search, as the device stores the magnetic
harmonic value even after turning off the device, so you can return to the area
and start the search directly.
- Searching coils are identified for each device upon sale. When consuming
search coils and requesting new coils, you need to identify these coils by
pressing the scroll button down during turning the device on, so that the
frequency of the coil appears at the bottom of the screen.
QZ80 Characteristics
16 |
Page 6
By VÖGEL Metal detektor with MWF Detector association
S.F.:
By VÖGEL Metal detektor with MWF Detector association
S.F.: 14.420khz
Scroll button down
Frequency of the coil

Device components
Searching coil - 33 cm
Designed to Standards
to detect the small and medium size
pieces.
Designed to standard sensing
small sized parts and nuggets.
Searching coil - 21cm
Headphons
ChargerUser ManualWarranty
card
Main Unit
carry handle Device Bag
Page 7

411
37
2
5
8
9
1
6
1
2
3
6
57
4
5
8
9
10
11
Power button ON/OFF
Move buttons
OK button
Back button
TFT display
Charger socket
Calibration button
Pinpoint button
searching coil socket
Hedphone socket
speaker
Main Unit
Page 8

1
2
3
45
7
6
ASSEMBLY
ﺚﺤﺒﻟا صﺮﻘﺑ ﺾﺒﻘﻤﻟا ﻂﺑر
8- Connect the device to the carrying handle by sliding the device in the place designated for it on the handle
to the other.
9- Align the coil plug and insert it into the socket on the side of the unit
Main.
10- Tighten the retaining ring slightly clockwise to fix the cable.
9
10 8
ًا
ً
1
ًً
2
ً
1 25 ً
3
ضر EQUINOX Series
1- We open the handle locks to
calibrate the length of the
handle.
2- Lengthening or shortening
both arms of the carrying
handle in proportion to the
user.
3- When determining the
appropriate length for each of
the forearms, we close the
locks to give them movement.
4- Putting rubber protection to
prevent friction between the
handle and the search disk.
5- Place the contact head of the
handle in the place designated for
it in the search coil.
6- Inserting the fixing shaft into
the channel designated for fixing
the handle to the search coil.
7- Turn the locking nut clockwise.
Page 9

Wiping should be done by keeping the search coil parallel to the soil surface while avoiding
excessive rubbing of the coil on the floor as shown in the figure.
In order for the search to be complete and without leaving unchecked areas, it is not possible to move
and move randomly, but by moving it from side to side, moving forward slowly at the end of each
scanning movement. Overlap a little with the previous sweep to make sure the floor is completely
covered. So that the average speed of a single scan movement is 2to 3seconds from right to left to right.
When moving the search coil during the search, the search coil must be kept perpendicular to the
surface of the soil, as this will increase the depth of detection and improve the detector's response to
small objects.
GETTING STARTED
Page 5
CORREC T USE
CORREC T WAY OF SWEEPING
Shaft height is wrong Shaft height is correct
5cm (~2'') above the ground.
accurate results.
Wrong search coil angle Wrong search coil angle Correct search coil angle
Incorrect way of sweeping Correct way of sweeping
Page 5
CORREC T USE
CORREC T WAY OF SWEEPING
Shaft height is wrong Shaft height is correct
5cm (~2'') above the ground.
accurate results.
Wrong search coil angle Wrong search coil angle Correct search coil angle
Incorrect way of sweeping Correct way of sweeping
3 2
•
•
•
•
Page 10
Note: Scanning is slow when using graph mode and treasure hunt mode

By VÖGEL Metal detektor with MWF Detector association
© MWF DETECTORS TECHNOLOGY . ALL RIGHTS RESERVED.
MAIN UNIT SETUP AND START WORKING
Turn on the device by pressing the Power Button
The boot screen will appear and then the interface of the connection mode with the
search coil
Page 11

MAIN MENU
Setting
Search
MAIN MENU
Setting
Search
This status appears if the
search coil is connected
This condition appears if the
search coil is not connected
The main interface contains two icons. Search to enter the search and settings menu to
adjust the device settings and an indicator of the battery charge level is present in all
interfaces. Moving between icons is done by pressing the Move buttons. To conrm one of
the two options, press the OK button
When selecting the Setting iconWhen selecting the search icon
Page 12

SETTING
SETTING
SETTING
When choosing the settings icon and pressing the enter button, we will see a settings
interface that enables us to reset the device. It contains options for adjusting the
brightness, sound, and language of the device, in addition to the possibility of restoring
the device to factory settings.
volume setting: when selecting the volume icon, the volume is changed by pressing
the Enter button. To change the volume according to eight levels, we press the
increase and decrease buttons
brightness setting: When selecting the brightness icon, the screen brightness value is
changed by pressing the OK button. The brightness value changes according to eight
brightness levels from 10% to 100%. We press the increase and decrease buttons
Page 13

Español
Deutsch
Pусский
SETTING
SETTING
Factory
Reset
Language setting: When selecting the language icon to change the language, we press
the enter button to go to the languages interface. The device has six languages: English,
German, French, Arabic, Spanish and Russian. The transition between these languages is
done through the navigation buttons, and to conrm one of the languages, we press the
OK button
Factory reset: When selecting the factory reset icon, factory settings can be restored
by pressing the OK button
To return to the settings interface, press the Back button
Page 14

To return to the settings interface, press the Back button.
SEARCH SETTING
MAIN MENU
Setting
Search
Sensitivity
SEARCH SETTING
ON
Iron desensitization
Increase and decrease sensitivity
Gain of receiving coil
Search settings: To adjust the search settings, there are three options
- The option to cancel or activate the sensitivity to iron wich work for the General mode and
Treasures mode.
- The option to decrease or increase the sensitivity level within ten levels of sensitivity
- Manual or automatic calibration option
The transition between these options is done by pressing the scroll buttons, and to conrm
one of the options, we press the conrmation button
When selecting the search icon and pressing the OK button, the search menu appears,
which contains the search Mode and search settings, to enter to the search setting
press OK.
Page 15

The calibration process must be performed before starting the research process,by
pressing Calibratition button.
Calibration
In the ground calibration settings interface, the user is asked to down the search coil from
the horizontal position to vertical with a height of 10 cm from the surface of the ground and
then scroll it right and left to complete the automatic calibration of the soil by analyzing the
magnetic nature of the soil to obtain the magnetic harmonic.
When the process is completed, a message appears on the screen stating that the
ground calibration is nished, and the user is asked to press Enter to return to the search
interface.
Note: If the calibration is not achieved, the user must repeat the previous steps.
Page 16
CALIBRATION SETTING
GROUND CLIBRATION IS DONE
PRESS ENTER
VALUE : 000
0%
VALUE :316
CALIBRATION
CALIBRATION SETTING
CALIBRATION SETTING
LIFT THE COIL 10 CM OFF THE
GROUND AND PRESS ENTER

Search Modes
When entering the search interface, we press the move button (move) to detect the search
mode icon then press the OK button to enter the search mode interface, which contains
four dierent search modes.
Note: When the device exposed to transient signals (magnetic noise), which appears either
in the form of an audio alert or indicators on the screen. The user must raise the device
40 cm from earth, then press the enter button periodically if the eect continues, to
recongure the signal during the search.
Page 17

General Mode
Depth
GENERAL SEARCH
LEVEL ID :
Metals
Mineral
70
Depth
GENERAL SEARCH
LEVEL ID :
Metals
Mineral
30
target frequency
Signal intensity
we can enter to the general search mode by pressing the Enter button, and the general
search pattern interface appears.
The general search interface contains two graphs, the rst showing the results of precious
metals in the search area, while the second shows the results of non-precious metals. in
addition to the target frequency, whose value increases by approaching the target.
Note: Calibration can be performed by pressing the Calibration button to go to the
Calibration Settings interface.
When a valuable target is found, the graph appears as in the illustration so that the signal
value increases as the target is near the surface of the earth
When a non-valuable target is found, the graph appears as in the illustration so that the
signal value increases as the target is near the surface of the Earth
Page 18

The device, through the treasure search pattern, directly analyzes the soil under the search
coil to distinguish the type of target, if it is found, through a graph to show the intensity of
the signal, thus the depth of the target. It also shows color discrimination between the
dierent targets if found during the search process. when a target appears during the search
process, the icon corresponding to the target type is selected from the list of targets on the
interface and also shows the signal of the graph with the same color consistency in addition
to a percentage of the intensity of the target signal. In the graph, the signal intensity
gradually increases as the target depth approaches the search coil.
When selecting the treasure search mode, we press the OK button to show the treasures
mode interface, which contains a chart for the graphic analysis of the search process in
addition to the list of targets that the device can detect.
Treasures Mode
Page 19
TREASURES MODE
Worthless
Caves
&
Mineral
Gold Valuable
TREASURES MODE
Worthless
Caves
&
Mineral
Gold Valuable
55
Signal intensity graph
Signal intensity