Volfoni ActivHub IR50 User manual

Model VPES-05000-A
Document : MUV120133-B00 ActivHub_IR50_User_Manual
Compatible with EDGE1.2 glasses (VPEG-01100)

SUMMARY
1. Overview
2. Content / Accessories
3. Product Description
3.1 Specification
3.2 How to use the ActivHub IR50
3.3 Default Room Configuration
3.4 System Connection
3.5 Technical Specifications
3.6 Ceiling / Wall Instructions
4. Warranty
5. Regulatory Standards
6. Contacts

1. OVERVIEW
The Volfoni ActivHub IR50(REF: VPES-05000-A) is a medium sized IR Emitter with a built-in
synchro nizer. Powerful and compact, the ActivHub IR50 designed for viewing 3D content in
a small room, such as a theater or room up to 50 seats, for example.
Thanks to its lightweight design, the ActivHub IR50 allows for greater heat dissipation,
meaning longer LED life protection. The kit includes a universal mounting socket for security
and is easy to install.
Key points :
• Volfoni ActivHub IR50 is an infra-red emitter to be used with quality
and lightweight active 3D glasses. Please contact Volfoni or your
distributor to get information about available active 3D glasses.
• Cost saving solution for auditoriums up to 50 seats.
• Quickandeasyset-upwithanyprojectorswithVESAorBNC3DSyncout.
• With no silver screen required, image quality is preserved at all
seating positions.

2. CONTENT / ACCESSORIES
The ActivHub IR50 includes:
1. ActivHub IR50
2. 1 SUB-D37/SUB-D9 cable
3. 1 SUB-D9/VESA cable
4. 1 SUB-D9/BNC cable
5. 1 Universal mount fastening
6. 1 Power supply adapter
7. 1 Power supply cable
8. 1 Activ 3D glasses tester with 3 batteries
Systems are provided with a new universal mount making installation
even faster (installation process is the same as described in section 3.6) :

3.
PRODUCTDESCRIPTION
SYNC IN (DB9)
Mounting hole
Power on emitter by using power supply adapter : LED will be off
Connect synchronization cable to emitter: If a signal coming from projector is
detected (2D or 3D mode), LED will be fixed red
3.1 Specification:
- Power supply : 24VDC, 1A 110-240V Universal Power Adapter
- Dimension : 182 x 70 x 44 mm (14.1 x 2.75 x 1.8 inches)
- Weight : 240 grams
- IR Wavelength : 940 nm
- Max range : Upto45 meters
Recommended maximum range diagram
Top view
30°
25m 30m
30°
15°
40m 45m
15°
7.5°
0°
7.5°

Screen
Viewerswithactive3Dglasses
3.2 How to use the ActivHub IR50
The IR Emitter must be facing the screen and connected to the projector for
synchronization. The IR Emitter emits the infra-red signal toward the screen. The signal
bouncestowardthe audience wearing 3D active glasses.
3.3 Default Room Configuration
8m 12m 14m
Maximum Size of Movie Theater with 1 ActivHub IR50
For other configurations, please refer to your technical support
15m
13m
9m

3.4 System Connection
The 3D Kit can be connected as shown in the following figure.
Compatible 3D
video projector
3D video player
HDMI cable
ActivHub IR50
BNC / SUB-D9female
or VESA Mini Din3 / Sub-D9 female
(3 meters by default - up to 30 meters)
Power Supply 24V-240V
(3 meters provided)
Wireless
Active 3D Glasses
Power outlet

3.5 Technical Specifications

3.6 Ceiling / Wall instructions
MOUNTING OVERVIEW
Before installing the emitter facing the screen, make sure you have all the needed tools and
the instruction manual. This wall fixing part is provided with all the screws and wall anchors you
might need. Follow the instructions to fasten this kit.
Parts Qty
2
2
1
1
1
Product description
Mounting plate
Screw covers
Extension
Adjusting Knuckle
Emitter plate

Mounting Instructions (step by step) STEP
Drill the holes with the given
bit (for wood surface only)
(For solid concrete and drywall only)
STEP
Insert wall anchors
STEP4
Tightly screw the base to the wall
Wall types and holes sizes
STEP5
Assemble the arm to the base
and then screw the emitter on it
Use the wall base to
mark each hole todrill
with a pencil.

4.WARRANTY
The ActivHub IR50 is warrantied to the original purchaser for three years according to local
legislation. Infra-red emitter and cables should be returned in original box along with original
proofof purchase.Infra-redemitter whichare broken or scratched are not covered.
Emitter : « Volfoni does not cover uninterrupted or error-free operation of the product under
warranty ».
5.REGULATORYSTANDARDS
European Union –Disposal Information
According to local laws and regulations your product should be disposed of separately
from household waste. When this product reaches its end of life, take it to a collection point
designated by local authorities.
Some collection points accept product for free. The separate collection and recycling of
your product at the time of disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interferences that may cause undesired
operation.
CE Certification
This device complies with CE Certification.
Electrical Safety (IEC 60950-1)
This device complies with IEC 60950-1
6.CONTACTS
Distributed by Volfoni SAS
2474, RD 6007
Le Logis de Bonneau
Les Bureaux du Parc
06270 Villeneuve-Loubet
France
Distributed in US by Volfoni INC
3450,CahuengaBd West.
Unit 504
Los Angeles, CA
90068 –USA
Distributed in Spain by Volfoni Iberia
4, Ronda Guglielmo Marconi
46980 Paterna (Valencia)
Spain
Commercial support
[email protected]
www.volfoni.com
[email protected]