VOLTSERVER Digital Electricity RXAC-2M User manual

Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Quick Start Guide
RXAC-2M
Digital Electricity Receiver, 1400W, 200VAC Output
Rev B 1 of 8
Digital Electricity™is a Limited Power Source per IEC/UL/CAN 62368-1 suitable for supplying a Class 2 circuit under NEC
Art. 725 and CEC Rule 16-200. (NOTE: Always follow local codes).
Specications
TYPE PARAMETER SPECIFICATION NOTES
Input Voltage 310-350VDC (336VDC Nominal) Must be supplied by listed VoltServer transmitter shelf
Number of Channels 4
Current Per Input Channel 3.0A MAX
Current, Total 7.0A MAX
Output Voltage 195-208VAC (200VAC Nominal) For supplying “universal power supply” loads
AC Frequency 60Hz
Current 7.0A RMS MAX @ 40°C
Output Connector IEC C13 socket Accepts IEC C14 plug
Max Output Cable Length 3m MAX
Environment Operating Temperature 0°C (32°F) to 55°C (122°F) Full power at 40°C
Altitude Up to 2000m
Eciency Conversion Eciency 92% TYP
Mechanical Dimensions 10.04” x 9.45” x 3.99”
255mm x 240mm x 101.35mm Not including wall mount brackets
Weight 6.3lbs Without cable whips
Mounting Wall Mount
19” Rack Mount 2U rack mount height
Grounding Method Threaded stud Locknut provided
Approvals Safety IEC/UL/CAN 62368-1
EMC
EN 55032 Class A
CFR 47 FCC Part 15 Subpart B Class A
EN 300 386 v2.1.1
EN 50121-4:16
Environmental
RoHS
33.6dBa acoustic noise per ANSI S12.51-
2010 and ISO 7779 2018
General CE
Box Contents Hardware Kit
(1) C14 to C15, 14AWG, 6FT Cable (PN: KITCBL-RXAC-C15)
(4) Terminal Block Plug, 3 position, straight, 3.5mm (PN: 1952270)
(1) CONN RING CIRC 10-12AWG #10
(1) 18-8 Stainless Steel Locknut with External-Tooth Lock Washer 10-32 Thread Size
(2) RXAC-2M wall mount brackets
(16) 4-40 1/4" Stainless Steel Screw 18-8 (used for wall mounting)
The RXAC-2M Receiver is a component in a Digital
Electricity™ line powering system. When paired with a
VoltServer transmitter unit, a Digital Electricity™ system
is formed (see diagram). If a person or a foreign
conductor comes in contact with the DE wiring, power is
disconnected; preventing re, equipment damage and
personal injury.
The RXAC-2M is a listed product,
certied to safety and EMC standards by a Nationally
Recognized Test Laboratory.
RXAC-2M Receiver
Input
Power
Source
RXAC -2M Digital
Electricity Receiver
Load
Device(s)
DE Cable
Digital
Electricity
Transmitter

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 2 of 8
[190.50]
[79.25]
Front View
Side View
[308.10]
Detailed Dimensions
without brackets
inches [mm]

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 3 of 8
[193.29]
[81.28]
[143.00]
[7.14]
[7.95]
[172.21]
[218.19]
[238.76]
[308.10]
Detailed Dimensions
with wall-mount brackets
inches [mm]
Side View
Front View
Top View

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 4 of 8
[359.92]
Top View
[87.88]
[492.00]
Chassis Ground
Detailed Dimensions
2x RXAC-2M mounted in RXAC-SHELF
inches [mm]
Front View

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 5 of 8
WARNING!
VoltServer RX Receiver inputs are intended to be
powered by VoltServer TX Transmitter products
only. Ensure that only VoltServer TX Transmitter
products are used as sources of power for this RX
Receiver unit.
WARNING!
The minimum wire gauge for use with VoltServer
GEN2 Transmitters is 18AWG copper conductors.
Mutual conductor capacitance shall be no more that
40pF per foot or 164 pF per meter.
WARNING!
The voltage rating of the transmission wiring
between VoltServer TX Transmitter and RX
Receiver(s) must be a minimum of 300Vrms.
The surface of this unit may become
hot while running. Shut down the unit
and allow to cool before servicing.
This symbol indicates the main earth
ground terminal for the device. See
“Grounding” section.
Do not open the unit. There are no eld
serviceable parts inside the unit. Risk of
high touch current under single fault
conditions. Up to 34mA may be present.
Symbols
NOTE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Warranty Statement
With the exception of the fan module, there are no
serviceable parts within the RXAC-2M. Opening or
modifying the unit will void the warranty.
Accessories (Sold Separately)
KITCBL-RXAC-C19: Power Cable, C14 to C19, Heavy
Duty, 15A, 250V, 14AWG, 6ft, Black
KITCBL-RXAC-C15: Power Cable, C14 to C15, Heavy
Duty, 15A, 250V, 14AWG, 6ft, Black
KITCBL-RXAC-C15-Y: Power Cable, C14 to two (2)
C15, Heavy Duty, 15A, 250V, 14AWG, 2.3ft, Black
RXAC-FAN-MODULE: Replacement fan module for
RXAC-2M
RXAC-SHELF: 2U, 19" Rack-mount Shelf, Holds 2
RXAC-2M Receivers
Servicing the Fan
If the RXAC-2M is displaying an eight red LED fault code,
which indicates a hardware failure, the modular fan may
need servicing. Conrm fan failure by feeling for a lack
of pressure coming from the fan grate. Contact
VoltServer customer support to make them aware of the
fault and request a replacement fan module.
Replacement fan module: SKU-FAN-MODULE
RXAC-SHELF
RXAC-SHELF populated with 2x RXAC-M

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 6 of 8
PIN 1
Pin Number Connection
1DE Input +
2No Connection
3DE Input -
Input Wiring
Four (4) 3-pin connectors (PN: 1952270) are included in
the accessory kit for terminating input connections. Input
connectors accept 16AWG to 20AWG wire. Input polarity
is specied below.
Output Wiring
A duplex C13 outlet is provided on the RXAC-2M for
connecting to the output of the device.
A single cable,
KITCBL-RXAC-C15
(
C14 to C15, Heavy
Duty, 15A, 250V, 14AWG, 6ft, Black
), is provided in the
box with every unit.
Startup Considerations
It can take up to two (2) minutes for the RXAC-2M unit
to complete its normal startup sequence and begin
delivering power to the load. During this time the blue
LEDs will be ashing.
Additionally, due to the feature that saves recent startup
attempt information to non-volatile memory, it is possible
that the unit will complete its boot sequence and
immediately show a fault condition with the red fault LED
blinking 2 times repeatedly. During this time the RXAC-
2M unit is in a cool-down state waiting to re-attempt to
deliver power to the load. Please wait 5-7 minutes for
this cool-down to complete, at which point the unit will
resume normal operation.
Method of Disconnect from Power
To disconnect the RXAC-2M Digital Electricity Receiver
unit from power, unplug ALL corresponding channels
from the DE Transmitter Chassis either at the transmitter
location or at the receiver. Due to the amount of
capacitance in the RXAC-2M Receiver, it may take up to
one (1) minute for the RXAC-2M to completely power
down.
Installation Instructions
NOTE
Must be installed according to all local and national
electric code requirements.
Physical Installation
The RXAC-2M is designed to be mounted to a wall
using the included wall-mount brackets, or to be
mounted in a 19” rack using a VoltServer rack-mount
shelf (sold separately). When wall mounting, the RXAC-
2M should have a minimum of 6” clearance around the
unit and should not be mounted directly above a heat
source. To ensure proper thermal performance, be sure
to mount the unit with the input connectors horizontally
so that the air ows horizontally through the unit. The
RXAC-2M is mounted using the supplied screws.
Grounding
The RXAC-2M receiver must be properly grounded to
the user’s facility earth connection for safe operation.
The protective conductor must be installed prior to
RXAC input connections are established. A ring terminal
and locknut are provided in the accessory kit with every
unit for this purpose. The grounding locknut must be
torqued down to 32in-lbs. A 12AWG or larger ground
wire must be used.
Inputs
LEDs Fan Module
1 2
34
C13 output ports
Earth
Ground

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 7 of 8
NOTE
Receiver may take up to 1 minute for output to enable.
LED Codes & Troubleshooting
NORMAL STATES LED PATTERN NOTE
Normal Operation
Boot-up Start-up sequence occurs when power is rst applied to
receiver.
Pre-charge DE Part of normal start-up sequence
Pre-charge Output Part of normal start-up sequence
OFF
SYSTEM
BLU
OFF
FAULT
RED
BLINK
OUTPUT
GRN
OFF
SYSTEM
BLU
OFF
FAULT
RED
BLINK (slow)
OUTPUT
GRN
BLINK (booting up)
SYSTEM
BLU
OFF
FAULT
RED
OFF
OUTPUTGRN
BRIEF BLINK (heartbeat)
SYSTEM
BLU
OFF
FAULT
RED
ON
OUTPUT
GRN
FAULTS LED PATTERN FAULT CODE TROUBLESHOOTING
Load Connection 2 Blinks
Connection problem between receiver output and
load.
Check receiver output polarity
Check connections to load
Wait for startup cooldown to complete (5-7min)
Overload 3 Blinks
Load Current too high
Reduce Load
Check wiring from Transmitter
Transmitter 4 Blinks
Transmitter Power Problem
Check transmitter card(s)
Check wiring from transmitter
Temperature 5 Blinks
Receiver temperature out of operating range
Adjust ambient temp surrounding receiver
Reduce Load
Short circuit 6 Blinks
Short Circuit detected between receiver and load
Check wiring
Check load for short circuit or ground fault
Recoverable Failure 7 Blinks Internal error, recoverable
Restart receiver
Internal Failure 8 Blinks Internal hardware Failure
Contact VoltServer
BLU OFF
RED BLINKS=FAULT CODE
GRN OFF

RXAC-2M Quick Start Guide
Customer Support: [e-mail] | 888-622-8658, Option 1
VoltServer Inc. | www.voltserver.com | [e-mail]
Rev B 8 of 8
Document Revision History
Revision Date Description
A Initial release
B 12/1/2020 Specs table re-format; added product photo, box contents;
harmonized language