INTRODUCTION
Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to
minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available
before starting installation.
Certain steps in the instructions are only presented in the form
of images. Explanatory text is also given for more complicated
steps.
In the event of any problems with the instructions or the
accessory, contact your local Volvo dealer.
Note!
This accessory is connected to the electrical system of the car.
It requires software unique to the car.
1
D8501926
Remove the clips (1) by pressing in the centre of the clips
Remove the blind cover plug (2) and the screw from under it
Carefully remove the frame (3) around the door handle. Use a
weatherstrip tool and start at the bottom edge
Remove the cover (4) for the door mirror by pulling it straight out
Detach the door panel (5) by sliding the panel upwards and
unhooking the top edge.
2A Illustration A shows the door
Illustration B shows the side of the door
Remove the connectors (1) from the module for the door control,
the bass speaker and the treble speaker
Carefully remove the moisture inhibitor (2) at the front edge
Drill out the rivets (3) from the bass loudspeaker. Use a 6 mm
