VS Sassoon SUPER BEARD XTP VSM7876A Assembly instructions

TOOL TIPS
for the precision beard & stubble trimmer.
VSM7876A
SUPER
BEARDXTP

2
HEY YOU!
TAKE A BOW FINE SIR.
THINGS ARE LOOKING UP
& YOU’VE JUST MADE A
QUALITY PURCHASE
WITH THIS NEW GROOMING TOOL.
WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

3
SUPER BEARD XTP / TOOL TIPS

SUPER BEARD XTP / TOOL TIPS
4
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety
instructions should always be followed, including the following:
Polythene bags over product or package may be dangerous. To avoid danger of
suffocation, keep this wrapper away from babies and children. This bag is not a toy.
DANGER: When the unit is used in a bathroom, unplug it after use since the proximity
of water presents a hazard even when the appliance is switched off
WARNING: Do not use or leave the AC power adaptor in a position where
it can become wet or there is a danger of it falling into a basin or other
vessels containing water. Keep the appliance dry, unless it is otherwise specified. Do
not use this appliance in or near bathtubs, showers, basins or other vessels containing
water.
- Do not immerse appliance in water or other liquids.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- Take care to avoid contact between the moving blades of the unit and the skin,
paying particular attention to the face, neck and hands.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.

5
SUPER BEARD XTP / TOOL TIPS
IMPORTANT: Always unplug the appliance when not in use or before cleaning.
Do not leave unattended when plugged in or switched on. Do not place on any
heat sensitive surface.
- Do not use any attachments other than those supplied by Conair Australia
Pty Ltd.
- Use this appliance only for its intended use as described within this
instruction booklet.
- Always unplug the appliance when fully charged.
- This appliance is not intended for commercial use.
- Never drop or insert any object into an opening.
- Do not use the appliance with damaged or broken attachment combs or with
any teeth missing from the blades, as injury may occur.
- Do not place on any surface while it is operating.
- Keep the cord away from heated surfaces
- Never twist or pull on the power cord.
- Do not use an extension cord with this appliance.
- After use do not wrap the cord around the appliance as in time this may cause
the cord to fracture. Coil cord loosely by the side of the appliance in storage.
- Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
- Do not use the appliance if it is damaged. In the event of damage, discontinue
use immediately and contact your dealer for instructions on returning it for
examination or exchange. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified person in order
to avoid a hazard.
- Always ensure that the voltage to be used corresponds to the voltage marked
on the unit.
- For additional protection, the installation of a residual current device
(RCD) with a rated operating current not exceeding 30mA is advisable in
the electrical current circuit supplying the bathroom. Ask your installer for
advice.

6
SUPER BEARD XTP / TOOL TIPS
1. Cord/cordless use
2. Lithium-ion power
3. High performance
DC direct drive
motor
4. Precision W-Tech
blades
5. Ultra-flexing
contouring head
6. STUBBLE COMB
GUIDE - 0.4mm -
5.0mm trimming
lengths
7. BEARD COMB GUIDE
- 5.4mm - 10.0mm
trimming lengths
8. 0.4mm to 10mm
trimming settings
with ultra-precise
0.2mm motorised
adjustments at the
touch of a button
9. + up button –
increases the
trimming length
10. -down button –
decreases the
trimming length
11. On/Off switch
12. Smart memory
function
automatically
stores & returns to
the last selected
setting for
consistent trimming
13. LED display shows
cutting length
setting
14. 100% waterproof
15. Ergonomic design
with curved body
for easy control &
compete comfort
in use
16. Cleaning brush
17. Oil
18. Power adaptor
SUPER BEARD XTP
BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The SUPER BEARD XTP is the precision beard & stubble
trimmer for perfect facial grooming.
1
8
14
15
7
4
2
3
9
12
13
10
11
5
6
17
18
16
P
E
R
F
E
C
T
L
Y
A
D
J
U
S
T
S
T
O
T
H
E
C
O
N
T
O
U
R
S
O
F
Y
O
U
R
F
A
C
E

7
SUPER BEARD XTP / TOOL TIPS
PREPPING YOUR
NEW TOOL
CHARGING
The SUPER BEARD XTP is so easy to use. But before you start using your new tool,
you must take the time to charge it for 3 hours before its first use.
Your new tool comes with a small amount of charge, but the initial charge will
ensure your new tool will have optimum power performance to give you smooth
fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously for 3
hours. After the first charge a full charge will only take 90 minutes.
- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.
- To charge the trimmer, first ensure your new tool is switched off, then insert
the small plug on the charging adaptor into the hole on the base of the
trimmer.
- Plug the charging adaptor into a suitable mains power socket and switch on.
- Always check that the charging indicator on the LED comes on when you have
switched the charging adaptor on.
- When the trimmer is charging the LED display lights up for a few seconds
and battery symbol indication will start to flash until the trimmer reaches
maximum capacity of 90 minutes.
- A full charge will take 90 minutes and will supply 80 minutes cordless
runtime.
- A quick charge of 5 minutes will supply 3 minutes cordless runtime,
sufficient for a single instant beard or stubble trim.
- To maintain optimum capacity of the rechargeable battery, it is highly
recommended to fully discharge & then recharge your tool for 3 hours every
3 months.

SUPER BEARD XTP / TOOL TIPS
8
NB - When the trimmer has less than 3 minutes charge left, the battery symbol
indication will start to flash. This indicates that the trimmer needs to be
recharged, however it may continue to run for a very short while after.
CORDED USE
To use the trimmer connected to mains power:
- Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
- Plug the charging adaptor into a suitable mains power socket and switch on.
- Switch the trimmer on – NOTE – if the battery is weak and low on battery
charge, wait approx. 1min before switching the trimmer on.

9
SUPER BEARD XTP / TOOL TIPS
HOW TO USE
THE SUPER BEARD XTP
BEFORE USING
• Always inspect the trimmer blades for noticeable signs of damage.
• Always inspect the trimmer blades before use to ensure they are free from hair,
debris etc.
• Ensure the trimmer is sufficiently charged before use.
• For best performance use on clean, dry hair that has been combed until tangle-free.
• If possible, when using for the first time, try and grow your facial hair for a few
days before cutting so you can trim down to a level that is best for you.

SUPER BEARD XTP / TOOL TIPS
10
SELECTING A CUTTING LENGTH
The SUPER BEARD XTP comes with 2x comb guides with 48 precision trimming
lengths for crafting all types of beard & stubble.
The comb guides allow you to change the cutting length of your trimmer. You’ll
need to experiment to find your preferred length, but as a guide, 0.4mm will give
you very short stubble, whilst 4mm will give you a longer stubble look. 6mm+
will give you a short beard and 10mm will give you a longer bearded look.
• STUBBLE COMB GUIDE - 0.4mm - 5.0mm – this is the pre-attached comb
guide
• BEARD COMB GUIDE - 5.4mm - 10.0mm – this is the second comb guide that
attaches over the top of the stubble comb guide
• Depending on the length setting you desire, attach either the stubble or beard
comb guide and ensure that the comb guide/s are correctly positioned by
pushing the comb guide/s gently downwards to secure into place.
• Use the ‘‘+’’ or ‘‘-’’ buttons to adjust the comb guides to the required trimming
length.
• The trimming lengths are displayed on the LED screen in ‘‘mm’’ – scroll
through the available length settings with the digital touch controls. The
length settings on the LED screen will change as you adjust the ‘‘+’’ or ‘‘-’’
buttons
• There are 48 length settings available: 0.4mm - 5.0mm OR 5.4mm - 10.0mm
in 0.2mm increments.
GOOD TO NOTE: ALWAYS PUT THE COMB GUIDE ON
BEFORE TURNING THE TRIMMER ON, AND TURN THE
TRIMMER OFF BEFORE REMOVING IT.

SUPER BEARD XTP / TOOL TIPS
11
TRAVEL LOCK FEATURE
The SUPER BEARD XTP comes with a travel lock feature which will lock the on/off
button from turning on accidently.
To activate the travel lock, press and hold the on/off button for 5 seconds until
the lock symbol is shown.
To de-activate the travel lock, press and hold the on/off button for 2 seconds
until the motor switches on and starts running.
When the charging plug is placed into the trimmer, the lock function will
deactivate.
USING THE SMART MEMORY FUNCTION
The SUPER BEARD XTP has a smart memory function that automatically stores
and returns to the last selected setting for consistent trimming.
When the unit is switched off the comb guide returns to 0.4mm position. When
the trimmer is switched back on the comb guide automatically moves up to the
last chosen length setting.

SUPER BEARD XTP / TOOL TIPS
12
TRIMMING TIPS
Hit up www.vsformen.com.au for more grooming tips & inspiration.
USING THE TRIMMING BLADES + COMB GUIDE
1. Switch the trimmer on by pressing the On/Off button.
2. Based on your desired trimming length, select your desired comb guide:
• STUBBLE COMB GUIDE - 0.4mm - 5.0mm – this is the pre-attached comb
guide
• BEARD COMB GUIDE - 5.4mm - 10.0mm – this is the second comb guide that
attaches over the top of the stubble comb guide
3. To adjust the cutting length of your trimmer, simply use the ‘‘+’’ or ‘‘-’’
buttons to adjust the comb guides to the required trimming length.
4. When trimming, the teeth of the comb guide should be pointing upwards and
should be flat against the face.
5. Move the trimmer upwards through the hair, a little at a time. It is suggested
to trim the hair in the direction of hair growth, as trimming against the
direction of growth could cause a rash or irritation.
The ultra-flex contouring head will follow the curves of your face to ensure
both accuracy and comfort.
6. Pull the skin firmly with one hand during the trimming process to ensure the
closest trim possible.
7. Move the trimmer slowly and carefully, so as not to cut any hair you do not
intend to trim.
8. Just like shaving, extra time should be given when trimming under the neck
area, as again this is where hairs grow in many different directions.
9. Trim, shape and define your facial hair as needed.
BE CAREFUL NOT TO APPLY EXCESS PRESSURE
TO THE BLADE, AS THIS MAY DAMAGE THE BLADE
AND CAN RESULT IN INJURY TO THE SKIN DURING
TRIMMING.

13
SUPER BEARD XTP / TOOL TIPS
USING THE TRIMMER WITHOUT THE COMB GUIDE
The SUPER BEARD XTP can be used without the comb guide attached. This is
ideal for detailing/shaping and general tidying of edges. If you are looking for
an ultra-close finish, you can use the trimmer without the comb guide. This will
give you an extremely short cut.
1. To detach the comb guide, gently hold the trimmer in one hand and with your
thumb and index finger push up on each side of the comb guide (Fig. 1).
2. Flip the comb guide to the back of the unit, gently pull down and secure under
the latch to lock into place (Fig. 2).
3. To release the comb guide, pull down and move away from the latch (Fig. 3).
IMPORTANT: PLEASE NOTE WHEN USING THE
TRIMMER WITHOUT THE COMB GUIDE, THE
CUTTING LENGTH WILL BE BELOW 0.4MM. THE
LENGTH SETTING SHOWN ON THE LED SCREEN
WILL NO LONGER BE RELEVANT WHEN THE COMB
GUIDE IS DETACHED.
Fig. 1 Fig. 2 Fig. 3

SUPER BEARD XTP / TOOL TIPS
14
TRIMMER CLEANING &
MAINTENANCE
Because the trimmer blades are precision made for a very special use, they should always be
handled with care. To ensure long-lasting performance of your trimmer, it is important to clean
the blades + the comb guide after every use.
The blades are washable for easy cleaning. Likewise, the trimmer is 100% waterproof, so you can
place the trimmer comb guides and blades under running water.
To remove the trimming blade:
1. Make sure that the trimmer is switched off
2. Detach the comb guide by gently lifting the front of the comb guide from both sides and
flipping it over to the back of the trimmer and locking it into position by clicking it securely
onto the fastener on the back of the handle.
3. To remove the trimming blade hold the handle of the trimmer with one hand, place your thumb
underneath the blades and push the blades away from the handle.
To clean the blades:
1. First, take the cleaning brush and brush away any loose hairs that have collected in the
blades.
2. Rinse the trimming blades under running water. The comb guide can also be rinsed separately.
3. After cleaning, make sure to shake off excess water and dry the head of the trimming blades +
comb guide before replacing onto the handle.
4. After rinsing the blades, they will need to be re-oiled.
5. Using the oil supplied with your new tool, unscrew the cap & cut off the very end of the
plastic tube with a pair of scissors to release the oil.
6. Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the blades. Leave
the tool on for a further few seconds to allow the oil to thoroughly spread across each of the
blades. Switch off the tool & remove any excess oil by gently dabbing with a cloth.
GOOD TO NOTE: BEFORE RE-ATTACHING THE
BLADES TO THE TRIMMER, ENSURE THEY ARE DRY
AND THE MOVING BLADE IS IN THE CENTRE (FIG. 4)
Fig. 4

15
SUPER BEARD XTP / TOOL TIPS
REPLACING THE COMB GUIDE
If for any reason the stubble comb guide breaks or becomes cracked, you can purchase spare
comb guides from Conair Customer Service on 1800 650 263
(in Australia) or 0800 266 247 (in New Zealand).
To change the comb guide, follow these instructions:
1. Using two screws in each side of the comb guide pin, screw in opposite force, until one side
of the screw comes loose (Fig.5).
2. Pull out the comb guide pins (Fig.6 + Fig.7).
3. Replace with a new stubble comb guide (Fig.8).
4. Replace the stubble comb guide pin and screw tightly (Fig.9).
Fig. 5 Fig.6
Fig.8
Fig. 7
Fig. 9

SUPER BEARD XTP / TOOL TIPS
16
WORLDWIDE VOLTAGE
This appliance has a multi voltage feature for worldwide use. The voltage
automatically converts for ease of use from 100v - 240v. This appliance has
an automatic internal converter which will automatically convert the voltage
without the need of a switch. A suitable plug adaptor will be required, please
refer to the chart below.
Plug adaptor
required
Voltage and
plug adaptors
Country Voltage
setting
British plug:
240V
Ireland, Great Britain, Singapore, South America,
Hong Kong (parts only), Africa (parts only)
240V
European plug:
240V
Asia, Europe, Middle East Noumea, Scandinavia,
South America, Hong Kong (parts only)
240V
Australian and
New Zealand
plug: 240V
Australia, New Zealand 240V
American
plugs: 120V
North America, Japan, Canada
(parts of)
120V

17
SUPER BEARD XTP / TOOL TIPS
BATTERY DISPOSAL
The Super Beard XTP trimmer contains a Li-ion battery. To protect the environment,
the appliance must be disposed of safely at the end of its useful life.
Please take the appliance to a recycling centre, where the internal
rechargeable battery should be removed by a professional and
recycled separately.
For more information about the recycling of electrical and battery operated
appliances, please contact your local council office or your household waste disposal
service.
LI-ION

SUPER BEARD XTP / TOOL TIPS
18
LIMITED THREE
YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. In New Zealand our goods
come with a guarantee that cannot be excluded under the Consumer Guarantee Act
1993.
Conair Australia Pty Ltd. will repair or replace (at our option) your appliance free of
charge for thirty-six months from the date of purchase if the appliance is defective
in workmanship or materials.
This warranty is an additional benefit and does not affect your legal rights. To obtain
service under this warranty, please read the Warranty Leaflet included or contact
Conair Customer Service at [e-mail].
TO MAKE A WARRANTY CLAIM YOU MUST
RETAIN YOUR PROOF OF PURCHASE.

Vidal Sassoon and related logos are trademarks of
The Procter & Gamble Company used under license by Conair.
©2017 Conair Australia Pty. Ltd.
Suite 101, 18 Rodborough Rd
Frenchs Forest NSW 2086
Australia
Conair New Zealand Limited
PO BOX 251159
Pakuranga, Auckland 1706
New Zealand
CONTACT US
For advice & tips on your new VS product email us on:
aus_inf[email protected]
CUSTOMER SERVICE
Australia: 1800 650 263
New Zealand: 0800 266 247
Visit VSFORMEN.COM.AU for grooming tips & inspiration.

SUPER BEARD XTP / TOOL TIPS
20
IB-17/251
YOU WERE
BORN TO
BE REAL,
NOT TO BE
PERFECT