VS Sassoon VSM350A User manual

TOOL TIPS
THEPRECISIONSHAVE
for the USB rechargeable rotary shaver with
3D floating heads for the closest shave.
VSM350A

2
HEY YOU!
TAKE A BOW FINE SIR.
THINGS ARE LOOKING UP
& YOU’VE JUST MADE A
QUALITY PURCHASE
WITH THIS NEW GROOMING TOOL.
WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING TIPS &
INSPIRATION OR FOLLOW US ONLINE
  

3
THE PRECISION SHAVE / TOOL TIPS

THE PRECISION SHAVE / TOOL TIPS
4
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety instructions should always be followed, including the following:
Polythene bags over product or package may be dangerous. To avoid danger
of suffocation, keep this wrapper away from babies and children. This bag
is not a toy.
DANGER: When the unit is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the appliance is switched off.
WARNING: Do not use or leave the AC power adaptor in a position where it
can become wet or there is a danger of it falling into a basin or other vessels
containing water. Keep the appliance dry, unless it otherwise specified.
Do not use this appliance in or near bathtubs, showers, basins or other vessels
containing water.
- Do not immerse appliance in water or other liquids.
- Do not reach for an appliance that has fallen into water.
- Take care to avoid contact between the moving blades of the unit and the skin,
paying particular attention to the face, neck and hands.
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
WARNING: For purposes of recharging battery, only use detachable supply unit
CA92 provided with this appliance.

5
THE PRECISION SHAVE / TOOL TIPS
IMPORTANT: Always ensure the appliance is switched off when not in use or
before cleaning. Do not leave unattended when switched on. Do not place on any
heat sensitive surface.
- Do not use any attachments other than those supplied by
Conair Australia Pty Ltd.
- Use this appliance only for its intended use as described within this
instruction booklet.
- Always unplug the appliance when fully charged.
- This appliance is not intended for commercial use.
- Never drop or insert any object into an opening.
- Do not use the appliance with damaged or broken attachment combs or with
any teeth missing from the blades, as injury may occur.
- Do not place on any surface while it is operating.
- Keep the cord away from heated surfaces
- Never twist or pull on the power cord.
- After use do not wrap the cord around the appliance as in time this may cause
the cord to fracture. Coil cord loosely by the side of the appliance in storage.
- Do not use outdoors or operate where aerosol (spray) products are being
- used or where oxygen is being administered.
- Do not use the appliance if it is damaged. In the event of damage, discontinue
use immediately and contact your dealer for instructions on returning it for
examination or exchange. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified person in order
to avoid a hazard.
- Always ensure that the voltage to be used corresponds to the voltage marked
on the unit.
- For additional protection, the installation of a residual current device
(RCD) with a rated operating current not exceeding 30mA is advisable in
the electrical current circuit supplying the bathroom. Ask your installer for
advice.

6
THE PRECISION SHAVE / TOOL TIPS
1. Cordless use
2. 3 flexing rotary shaver
heads & blades
3. Shaving head release button
4. On/Off switch with Travel
Lock feature
5. LED display
6. Pop-up trimmer
(located at the back)
7. Protective cover
8. Cleaning brush
9. Storage /Charging stand
10. USB charging cable
11. USB wall charging adaptor
THE PRECISION SHAVE
BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Precision Shave is the rechargeable rotary shaver with 3D
floating heads for the closest shave.
1
2
3
5
4
7
6
8
9
10 11

7
THE PRECISION SHAVE / TOOL TIPS
PREPPING YOUR
NEW TOOL
CHARGING
The Precision Shave is so easy to use. But before you start using your new tool, you must
take the time to charge it for 3 HOURS BEFORE ITS FIRST USE. Your new tool comes
with a small amount of charge, but the initial charge will ensure your new tool will have
optimum power performance to give you smooth fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously for 3 hours.
- Ensure your new tool is switched off.
- Use the provided USB cord & wall adaptor & the charging stand to connect the
appliance to main supply, or connect the Precision Shave directly to the mains supply
using the USB cord & wall adaptor.
- The adaptor supplied can be used for worldwide voltage 100-240V . A plug adaptor
suitable for the country will be required.
- The USB cable can alternatively be plugged directly into a direct USB port for
charging.
- Once charging is started, the charging icon will display in the LED display. The LED
display will flash the remaining operating time, this will increase in minutes as the
tool charges.
- The charging icon will disappear when the appliance is fully charged. At the same
time, the LED will show 99 & fully charged icon will appear. Remove from the charging
stand or USB adaptor once full charge is reached.
- It takes 3 hours for tool to be fully charged.
- A full charge will supply 99 minutes cordless runtime.
- To maintain optimum capacity of the rechargeable battery, it is highly recommended
to allow your shaver to fully discharge & then recharge for 3 hours every 3 months.

THE PRECISION SHAVE / TOOL TIPS
8
HOW TO USE
CHARGING YOUR SHAVER
Fig.1
Fig.3 Fig.4 Fig.5
Fig. 2 Part 1 Fig. 2 Part 2 Fig. 2 Part 3
Low battery indicator
1. When the shaver is turned on, the LED display will light up & show the remaining
operating time.
2. If you hear a beep sound & find the charging icon starts to flash when using or after
use, the battery is low & needs recharging (Fig.1).
3. Use the USB cable and power adaptor provided. Fold the charging stand into position
(Fig 2 Part 1). Plug the cable into the rear of the stand. Alternatively, you can plug the
USB cable directly into a USB port.
4. Once charging is started, the charging icon will appear, the LED display will flash the
remaining operating time & the remaining operating time will increase as the tool
charges (Fig. 3).
5. The charging icon will disappear when the tool is fully charged, at the same time,
the LED will show 99 & fully charged icon will appear (Fig. 4). Remove the tool from
charging once the 99min battery charge is reached (Fig. 5).
6. It takes up to 3 hours for the shaver to be fully charged.
NOTE: Do not charge the appliance for longer than the recommended time.
1 - 3Hrs

9
THE PRECISION SHAVE / TOOL TIPS
HOW TO USE THE
PRECISION SHAVE
BEFORE USING
- Always inspect the rotary heads & blades for noticeable signs of damage.
- Always inspect the rotary heads & blades before use to ensure they are free
from hair, debris etc.
- If the foil is cracked, broken or loose, do not use it again & replace with a
new foil. Using a foil in a faulty condition can cause injury.
- Ensure the shaver is sufficiently charged before use.
- Men whose skin is sensitive or easy irritated be shaving, or who suffer from
a skin allergy, should test one section on the leg or arm before using the
shaver.
- Do not shave on open wounds, cuts, burns, warts, moles or on sunburned
skin.
- Do not use the foil shaver if you suffer from skin irritations or infections,
such as psoriasis or eczema. If at all unsure always consult your doctor
before use.

THE PRECISION SHAVE / TOOL TIPS
10
TRIMMING &
SHAVING TIPS
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING TIPS & INSPIRATION
OR FOLLOW US ONLINE   
USING THE PRECISION SHAVE
PREPARING THE SKIN
Before using the Precision Shave, make sure that the skin is clean & free from
oil & dirt.
Exfoliating the skin with a face scrub once a week helps to:
- Prevent hairs from growing under the skin, resulting in in-grown hairs
- Remove dead skin cells & refine the texture of your skin, resulting in a closer
shave
- Prepare your skin to help it absorb skin care products.
We recommend exfoliating ideally the day before, as well as just before shaving.
This will help straighten the hair & make it easier to shave. Avoid exfoliating just
after shaving.
Having a warm shower before use will also help to soften the hair.
1. Remove the protective cover.
2. Switch the shaver on by pressing down on the on/off button (hold for 3
seconds if the travel lock has been engaged).
3. It is strongly recommended to start shaving from the neck area, which is
more sensitive
4. Hold the shaver heads parallel to the skin & use short overlapping circular
motions both clock wise & anti-clockwise.