VS Sassoon THE GROOM CAPTAIN Assembly instructions

1
TOOL TIPS
THEGROOMCAPTAIN
for the multi-purpose
face & body trimmer
VSM726SA

2
HEY YOU!
TAKE A BOW FINE SIR.
THINGS ARE LOOKING UP
& YOU’VE JUST MADE A
QUALITY PURCHASE
WITH THIS NEW GROOMING TOOL.
WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION
OR FOLLOW US ONLINE
  

THE GROOM CAPTAIN / TOOL TIPS
3

THE GROOM CAPTAIN / TOOL TIPS
4
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety instructions should always be followed, including the following:
Polythene bags over product or package may be dangerous. To avoid danger of
suffocation, keep this wrapper away from babies and children. This bag is not
a toy.
DANGER: When the unit is used in a bathroom, unplug it after use
since the proximity of water presents a hazard even when the
appliance is switched off
WARNING: Do not use or leave the AC power adaptor in a position where it
can become wet or there is a danger of it falling into a basin or other vessels
containing water. Keep the appliance dry, unless it otherwise specified. Do
not use this appliance in or near bathtubs, showers, basins or other vessels
containing water.
- Do not immerse appliance in water or other liquids.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- Take care to avoid contact between the moving blades of the unit and the
skin, paying particular attention to the face, neck and hands.
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.

THE GROOM CAPTAIN / TOOL TIPS
5
IMPORTANT: Always unplug the trimmer when not in use or before cleaning.
Do not leave unattended when plugged in or switched on. Do not place on any
heat sensitive surface.
- Do not use any attachments other than those supplied by Conair Australia
Pty Ltd.
- Use this appliance only for its intended use as described within this
instruction booklet.
- Always unplug the appliance when fully charged.
- This appliance is not intended for commercial use.
- Never drop or insert any object into an opening.
- Do not use the appliance with damaged or broken attachment combs or with
any teeth missing from the blades, as injury may occur.
- Do not place on any surface while it is operating.
- Keep the cord away from heated surfaces
- Never twist or pull on the power cord.
- Do not use an extension cord with this appliance.
- After use do not wrap the cord around the appliance as in time this may cause
the cord to fracture. Coil cord loosely by the side of the appliance in storage.
- Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
- Do not use the appliance if it is damaged. In the event of damage, discontinue
use immediately and contact your dealer for instructions on returning it for
examination or exchange. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified person in order
to avoid a hazard.
- Always ensure that the voltage to be used corresponds to the voltage marked
on the unit.
- For additional protection, the installation of a residual current device
(RCD) with a rated operating current not exceeding 30mA is advisable in
the electrical current circuit supplying the bathroom. Ask your installer for
advice.

6
9 8
6
1. Diamond sharpened blades
2. Washable blades
3. Cordless use
4. 34mm trimming blade
5. Foil shaver
6. Rotary blade for nose and ear hair trimming
7. 3 easy-fit beard comb guides (5mm, 7mm &
9mm) to trim, blend and fade
8. 6 position short beard & stubble comb guide
(1mm to 3.5mm) for all-over trimming &
shaping of short beard or stubble
9. 3mm body comb guide to keep your manscaping
game on point
10. Storage pouch
11. Cleaning brush
12. Oil
THE GROOM CAPTAIN
BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Groom Captain is the multi-purpose face & body trimmer.
14 5 6
3
11
7
12
10
2
THE GROOM CAPTAIN / TOOL TIPS

THE GROOM CAPTAIN / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The Groom Captain is so easy to use. But before you start using your new tool,
you must take the time to charge it overnight for 16 hours before its first use.
Your new tool comes with a small amount of charge, but the initial charge will
ensure your new tool will have optimum power performance to give you smooth
fast cutting, every time.
INSTRUCTIONS FOR USE
IMPORTANT! Only use the charging unit and attachments supplied with this
trimmer.
Charging Instructions
• This trimmer is equipped with Ni-MH batteries
• Before using for the first time, allow it to charge for two consecutive full
charges (twice 8 hours). This initial super-charge ensures optimum power
performance to ensure smooth fast trimming every time.
• Maximum battery capacity will only be reached after 3 charging and
discharging cycles.
• Ensure the trimmer is switched off.
• Plug the charging unit into a suitable mains socket.
• The red charging indicator light will illuminate when the trimmer is plugged
in and connected to the mains. The red charging indicator light will switch off
once the trimmer is fully charged.
• A full 8 hours charge will supply enough power for 60 minutes of use.

THE GROOM CAPTAIN / TOOL TIPS
8
• For the 16 hour supercharge before your first use, plug the charging unit into a
suitable mains socket and once the red charging indicator light is illuminated,
allow the trimmer to charge for 8 hours. The red charging indicator light will
switch off once the trimmer is fully charged. Unplug the trimmer and then plug
in once again for another full 8 hour charge.
Preserving the batteries
• In order to maintain the optimum capacity of the rechargeable batteries,
the trimmer should be fully discharged and then recharged for 8 hours every
3 months.

THE GROOM CAPTAIN / TOOL TIPS
9
HOW TO USE
THE GROOM CAPTAIN
BEFORE USING
• Always inspect the trimmer before use for noticeable signs of damage.
Do not use if damaged.
• Ensure the heads are free from hair and debris and that the blades are
properly oiled (refer to Cleaning & Maintenance section for further
information). Subsequent charges should be 8 hours and the red charging
indicator light will switch off when the unit is fully charge.
• Ensure the trimmer is sufficiently charged.
• If the foil is cracked, broken or loose, do not use it again and replace with a
new foil. Using a foil in a faulty condition can cause injury.
• Do not shave on open wounds, cuts, burns, warts, moles or on sunburned
skin.
• Do not use the foil shaver if you suffer from skin irritations or infections,
such as psoriasis or eczema. If at all unsure always consult your doctor
before use.

THE GROOM CAPTAIN / TOOL TIPS
10
CHANGING THE HEADS
1. Before changing the heads, ensure the trimmer is switched o.
2. To remove a head, hold the handle of the trimmer with one hand, hold the head
with the other hand and push up from under the blades to lift the head up and away
from the handle.
3. To attach a head, line up the back of the attachment head with the holding section
on the trimmer (See Fig. 1).
4. Then line up the two front prongs of the attachment head with the two metal clips
on the handle (See Fig. 2).
5. These prongs on the head should rest on top of the metal clips from the handle
(See Fig. 3).
6. Click the head down on to the trimmer
Fig. 1 Fig. 2 Fig. 3

THE GROOM CAPTAIN / TOOL TIPS
11
TRIMMING TIPS
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION
OR FOLLOW US ONLINE   
USING THE 34MM TRIMMING BLADE
The 34mm trimming blade has been designed for stubble, beard & moustache trimming +
shaping, , as well as manscaping when used with the 3mm body comb guide.
The following comb guides are for use with the 34mm trimming blade:
• 3 beard comb guides (5mm, 7mm & 9mm) for easy blending & fading
• 6 position short beard & stubble comb guide (1mm to 3.5mm) for all-over trimming &
shaping of short beard or stubble
• 3mm body comb guide to keep your manscaping game on point
The 34mm trimming blade can also be used without any comb guide attached to outline, and for
an even closer finish.
BE CAREFUL NOT TO APPLY EXCESS PRESSURE
TO THE BLADE, AS THIS MAY DAMAGE THE BLADE
AND CAN RESULT IN INJURY TO THE SKIN DURING
TRIMMING.

THE GROOM CAPTAIN / TOOL TIPS
12
ATTACHING THE COMB GUIDES TO THE TRIMMER
1. Slide the trimmer teeth and the top of the blades into the space under the
comb guide. (Fig. 7)
2. Click the guide into position by gently pressing the back of the guide down to
the back of the blade. (Fig. 8) The comb guide should click under the back of
the metal blade.
Fig. 7 Fig. 8
USING THE 34MM TRIMMING BLADE WITH THE 6
POSITION SHORT BEARD & STUBBLE COMB GUIDE
1. The adjustable 6 position short beard & stubble comb guide allows you to
take control of the length of your stubble to the ideal length between 1mm-
3.5mm. You will need to experiment to find your preferred length, but as a
guide, 1mm will give you a very short stubble look and 3.5mm will be a short,
neater beard.
2. To attach the 6 position short beard & stubble comb guide, slide the comb
guide onto the front of the 34mm trimming blade and push down at the rear to
lock into place – you will hear a clicking noise when it’s in position.
3. The comb guide has 6 length settings, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3mm &
3.5mm. To adjust the cutting length, push the button and click the comb guide
forward to the required position.

THE GROOM CAPTAIN / TOOL TIPS
13
4. Select the required cutting length setting (1-3.5 mm). If you require more than one
cutting length, start with the longest length first.
5. Switch the trimmer on.
6. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat against
the skin.
7. Move the trimmer upwards and outward through the hair, against the direction of
hair growth.
8. The trimmer will work most efficiently when cutting through hair at its own speed.
9. To remove the 6 position short beard & stubble comb guide, gently lift the guide
off the head by lifting the rear section.
USING THE 34MM TRIMMING BLADE WITH THE 3
BEARD COMB GUIDES
1. Attach the comb guide as shown in ATTACHING THE COMB GUIDES TO THE TRIMMER
section.
2. The beard combs guides come in 3 different length settings: I = 5 mm, II = 7 mm
and III = 9 mm.
3. If you require more than one cutting length, start with the longest length first
(7mm).
4. Switch the trimmer on.
5. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat against
the skin.
6. Move the trimmer upwards and outward through the hair you wish to blend.
7. To blend-in a shorter length use a smaller beard comb and use in the same way
as above.
8. The trimmer will work most efficiently when cutting through hair at its own speed.
9. To remove beard comb guide, lift the rear of the guide upward and away from the
34mm trimming blade head.

THE GROOM CAPTAIN / TOOL TIPS
14
USING THE 34MM TRIMMING BLADE WITH THE
3MM BODY COMB GUIDE
The body comb guide can be used to trim or blend hair on the key body zones
including the chest and torso. To use the 3mm comb guide:
1. Attach the comb guide as shown in ATTACHING THE COMB GUIDES TO THE
TRIMMER section.
2. Switch the trimmer on.
3. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat
against the skin.
4. Move the trimmer upwards and outward through the hair you wish to trim.
5. The trimmer will work most efficiently when cutting through hair at its own
speed.
6. To remove the comb guide, lift the rear of the guide upward and away from the
34mm trimming blade head.
USING THE TRIMMER WITHOUT THE COMB GUIDE
The trimmer can be used for detailing/shaping around the edge of the beard or to
get a much closer result (0.4mm).
To remove the comb guide, squeeze the sides of the comb guide, which will release
the back from the blade. Lift the guide away.

THE GROOM CAPTAIN / TOOL TIPS
15
USING THE 34MM TRIMMING BLADE TO OUTLINE
The 34mm trimming blade without a comb guide attached will cut roughly to a length of
0.4 mm.
1. Do not attach a comb guide.
2. Hold the trimmer upside down with the blade facing downwards, yet flat against
the skin.
3. Move the trimmer gently downwards in small strokes around the edge of the area
you wish to outline.
4. Having defined the outline, hold the trimmer with the blades pointing upwards, yet
flat against the skin and move the trimmer upwards against the direction of hair
growth. This will trim the unwanted hair adjacent to the outline.

THE GROOM CAPTAIN / TOOL TIPS
16
USING THE FOIL SHAVER
PREPARING THE SKIN
Before using the foil shaver, make sure that the skin is perfectly clean and free
from grease or cream. Exfoliating the skin once or twice a week before shaving
helps to maintain healthy and fresh skin, but it also helps to:
• Prevent hairs from growing under the skin, resulting in in-grown hairs
• Remove dead skin cells and refine the texture of your skin, resulting in a closer
shave
• Prepare your skin to help it absorb skin care products.
We recommend exfoliating ideally the day before, as well as just before shaving.
This will help straighten the hair and make it easier to shave. Avoid exfoliating
just after shaving.
Having a warm shower before use will also help to soften the hair.
1. Attach the foil shaving head (see CHANGING THE HEADS instructions for details).
2. Switch the trimmer on by sliding the On/Off switch upwards so that the
“I”marking is visible.
3. Always keep the shaver perpendicular to the surface to be shaved.
4. Always work with both hands: stretch the skin with one hand and move the
trimmer with the other hand.
5. Slowly move the shaver, exerting light pressure. As a precaution, the operation
of the trimmer may slow down substantially if the foil shaving head is pressed
too hard against the skin.
Note: This foil shaver head is design to tidy up facial hair around the beard line or
for small body hair areas. It is not designed for a full clean facial shave.

THE GROOM CAPTAIN / TOOL TIPS
17
ATTACHING THE ROTARY BLADE
6. Insert the pin of the trimmer body into the hole of the trimmer head (See Fig. 4).
7. Line up the rear prong of the attachment head with the slot on the back of the
handle (See Fig. 5).
8. The head should lean at an angle with the two front prongs of the head resting on
the metal clips of the handle (See Fig. 6).
9. Click the head down onto the handle.
Fig. 4 Fig. 5 Fig. 6
USING THE ROTARY BLADE
The rotary blade has been designed for trimming those hard to reach places like nose
& ear hair. No nicks or cuts.
1. Attach the rotary trimming blade.
2. Switch the trimmer on.
3. Insert the trimmer into the nose or ear and gently move the trimmer in a circular
motion.
4. Always turn the trimmer on BEFORE you insert into your nostril or ear canal to
avoid painfully snagging hairs.
5. Never insert the trimmer more than 5-6mm into your nose or ears.
6. Never turn the trimmer off whilst in the nose and ears.

THE GROOM CAPTAIN / TOOL TIPS
18
TRIMMER CLEANING &
MAINTENANCE
Because the trimmer blades are precision made for a very special use, they
should always be handled with care. To ensure long-lasting performance of
your trimmer, it is important to clean the blades + the comb guides after every
use.
The blades are washable for easy cleaning.
To remove the trimming blade, follow the instructions as shown in CHANGING
THE ATTACHMENT HEADS.
1. First, take a small brush and brush away any loose hairs that have collected
in the blades.
2. Rinse the trimming blades under running water. The comb guides can also
be rinsed separately.
3. After cleaning, make sure to shake off excess water and dry the head of the
trimming blades + comb guide before replacing onto the handle.
4. Do not disassemble the blades.
OILING THE BLADES
Periodically, it may be necessary to oil the blades. After cleaning, attach a
trimmer head, switch on and oil the blades using a few drops of the lubricating
oil supplied. Only use the lubricating oil supplied with the trimmer as this is
specifically formulated for high speed trimmers and does not evaporate or slow
the blades.

THE GROOM CAPTAIN / TOOL TIPS
19
KEEPING YOUR FOIL SHAVER IN TIP TOP SHAPE
To remove the foil shaver head, follow the instructions at CHANGING THE
ATTACHMENT HEADS.
1. To make cleaning easier, the foil of the shaving head is removable.
2. To remove it, press the fasteners on its sides using your thumb and your
index finger and lift it up.
BE CAREFUL NOT TO PUSH ON THE FOILS, THEY ARE
DELICATE AND CAN EASILY BE DAMAGED.
3. Rinse the shaver cutter and foil frame under running water or in a sink. Do
not use hot water. Use only warm or cold water.
4. After wet cleaning, allow the foil frame and cutters to air-dry before closing
the foil frame and shaver head. The cutter can also be cleaned with a
cleaning brush.
5. Replace shaver head back onto the handle until it clicks into place. Wipe the
surface of the main unit with a dry towel. Do not dry the foil area. Let the
shaving head air-dry.
NEVER use thinners, other solvents or any harsh cleaners.
6. Once the foil shaver is dried, carefully place the protective cap on.

THE GROOM CAPTAIN / TOOL TIPS
20
BATTERY DISPOSAL
The Groom Captain contains a Nickel Metal-Hydrate battery.
To protect the environment, the appliance must be disposed of
safely at the end of its useful life.
Please take the appliance to a recycling centre, where the internal rechargeable
battery should be removed by a professional and recycled separately.
For more information about the recycling of electrical and battery operated
appliances, please contact your local council office or your household waste
disposal service.
NI-MH