VStarcam C16S User manual

Video Tutorial
If it is your first time to use our products, it is recommended to scan the following QR
code to watch the video tutorial.

Product Description
2
Using a screwdriver to unscrew and open the back cover.
3
Hold the reset button for about 5 seconds until the camera makes a crisp sound.
1Power on the camera, wait for the camera to finish booting.
Reset Camera:
HD lens
IR LED
Microphone
WiFi antenna
Reset button
Ethernet port
Power interface
TF slot (Please
unpack the cover)

1Punch the hole according to the hole position of the bracket.
2
Embed the expansion rubber plug.
3
Fix the bracket with screws and fix thecamera on the stand.
Camera Installation

Step 1 : Pre-Setup
Connect your phone to the WiFi network (2.4GHz only).
Make sure the phone and camera are connected to the same router.
Powering on the camera and wait for about 30 seconds for the camera to finish booting.
Please connect the camera to the LAN port of the router with a network cable.
Network cable
LAN

Step 2 : APP Download and Registration
1 2
Search for "Eye4" in App Store
or Google Play, or scan the QR
code to download the app.
Click "Register", enter the user name
and password to complete the registration,
and also supports the third party such
as Facebook to login directly.

Step 3: Add Devices to the APP
1Open the app, click the "+" in the upper right corner , and scan the QR code
on the body of the camera, then follow the prompts on the app to complete
the adding. (Note: For Android phone, it will pop up some system permission
window, please select "Allow")

2If you can't find the QR code, click the "+" in the upper right corner, select "Others"
on the bottom right corner --- "IP Camera"--- "Wired connection", then follow the
prompts on the app to complete the adding.

You re Done!
Please write down your device information:
Wait about 30 seconds, APP will search for the
device, click "Bind" to complete the configuration.
Eye4 account name:
Eye4 account password:
‘
Or select "Configure WiFi" and enter the WiFi
password to complete the configuration.

Configuring WiFi
Please click "Settings", select "WiFi ", select the WiFi you want to connect, enter
the WiFi password. Wait about 60S until the restart of the camera finished, you
can unplug the network cable to complete the configuration.

Device Share
Click "Settings", then select "Device Share"--- "QR Code Sharing". Other users can open
the app and click the "+" in the upper right corner of the homepage to scan the QR code
to add the device.

Cloud Storage
The camera supports cloud storage service. After activated the cloud storage service, when
the motion detection is triggered, the video will be uploaded to the cloud storage server
immediately, and the video can be viewed even if the camera is stolen.

After-Sales Service
Online customer service:
AM 8:30-12:00 PM 13:20-17:50 Night 19:00-23:00
on weekdays (UTC+8)
If you have any questions, please con tact our
customer service: Click on "Me" in the lower right
corner of the APP. Select "Online Customer Service".
: [e-mail]
: www.vstarcam.com/support
Official Mall : https://shop.vstarcam.com/
Email
F A Q

物料编号：3-05-01-007-3037
封面材质：128g铜版纸（封面/封底过光膜）
内页材质：128g铜版纸
尺寸：120x80mm
颜色：四色印刷
装订方式：骑马钉（一个钉）