Vtronix Q380-EW User manual

QUICK START GUIDE
PAIRING THE Q380-EW WITH YOUR MINI SPLIT
WI-FI ENABLED MINI SPLIT REMOTE CONTROL

THE Q-380 EW NEEDS FIRST TO BE “PAIRED” WITH
YOUR MINI-SPLIT (AIR CONDITIONER/HEAT PUMP)
WITH A SPECIFIC CODE

1CHARGE THE REMOTE. THE BATTERY
INDICATOR WILL TELL YOU WHEN IT’S CHARGED
(about 4 hours)
2 WAYS TO CHARGE: VIA WALL BASE OR WALL MOUNT (DIRECT PLUG)

2 CHECK TO SEE IF THE BRAND OF YOUR MINI SPLIT IS ON THE CODE LIST. IF IT IS, WRITE DOWN THE SUGGESTED
CODE NUMBER OR NUMBERS NEXT TO IT ( 3 DIGIT CODES )

4. THE CODE NUMBER FLASHES
3. PRESS
THE ON/OFF BUTTON AND
THE SET BUTTON
AT THE SAME TIME UNTIL …

5. ADVANCE THE CODE WITH THE UP ARROW
WHILE POINTING AT THE MINI-SPLIT (MAKE
SURE THE MINI-SPLIT HAS POWER). IF THERE WAS
A SUGGESTED CODE, ADVANCE QUICKLY TO IT. IF
YOUR BRAND IS NOT LISTED START AT 000
CODE NUMBER- ADVANCES EACH TIME YOU HIT THE UP ARROW-

6WHEN THE UNIT BEEPS, HIT THE SET BUTTON
AND TRY THE DIFFERENT FUNCTIONS. IF ALL
THE BUTTONS DO NOT WORK AS EXPECTED,
PRESS THE ON/OFF BUTTON AND THE SET
BUTTON SIMULATANEOUSLY AND
ADVANCE TO THE NEXT CODE WITH THE UP
ARROW. THERE IS A TOTAL OF 1000 CODES!!
BUT YOU CAN CONTINUE ANY TIME FROM
THE LAST CODE YOU TRIED. IF YOUR BRAND IS
LISTED , TRY THE SUGGESTED CODES FIRST.
CODE NUMBER

OTHER TIPS:
LOCKING THE CODE: PRESS SET AND MANUAL WIND DIRECTION
AT THE SAME TIME. Press again to unlock-
TO CHANGE FROM DEGREES
FAHRENHEIT TO CELSIUS AND VICEVERSA PRESS DOWN KEY AND SET SIMULTANEOUSLY
FOR A FULL COPY OF THE INSTRUCTION MANUAL GO TO:
https://vtronix.com/17-mini-split-controls-wireless