WAC PS-24DC-U96R-S6 User manual

INSTALLATION INSTRUCTION
24VDC POWER SUPPLY
PS-24DC-U96R-S6
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Nov 2022 1.
SAFETY INSTRUCTION
IMPORTANT: NEVER attempt any work without shutting off the electricity.
•Always turn off power at fuse box prior to installation to prevent electrical shock.
•For installation and serviced by a qualified, licensed electrician.
•Install in accordance with national electric code, and local regulations.
•Consult with local inspector to assure compliance.
CAUTION
•Read all instructions before installing.
•Handle product with care.
•Do not modify or disassemble product beyond instructions or warranty will be void.
•Failure to follow safety warnings, and installation instruction will void the warranty
FEATURES
•Protection: short circuit/over loading/over temperature
•24VDC Output, 4A Max (96W) Output Current on each output channel, ≥ 0.9 pf
•Ambient Temp: -20ºC to 45ºC (-4°F to 113°F)
•Full protection aluminum housing for dry and damp location
PRODUCT DIMENSION:
96W

INSTALLATION INSTRUCTION
24VDC POWER SUPPLY
PS-24DC-U96R-S6
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Nov 2022 2.
WIRING AND INSTALLATION:
1. Turn Power off at circuit breaker
2. Connect electrical power feed wires
•The power supply box has a separate line voltage, and low voltage wiring compartments.
•Trade size knock out are provided on both compartments. Connect building wires to the same color power
supply wires with wire nuts or UL certified electrical connector.
•Enclosed 24VDC class 2 output remote power supply must be installed away from any heat sources, and
it must be accessible for service.
•Enclosed 24VDC class 2 output remote power supply is UL listed.
•This power supply provides a 6 inches output leads wires.
Power Supply Output
RED
+24VDC
BLACK
-
SYSTEM DIAGRAM:
Below example illustrate the wiring diagram when it’s connected to wireless DMX controller CTR-WDMX-3CH.