Wacker neuson Gp 6600a User manual

5000186340

04 0311

5000186340

Operator’s Manual

Portable Generator

GP 6600A

GPS 6600A

non-CARB

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the

machine. Any other type of reproduction is prohibited without express

written permission from Wacker Neuson Production Americas LLC.

Any type of reproduction or distribution not authorized by Wacker

Neuson Production Americas LLC represents an infringement of valid

copyrights. Violators will be prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their

respective owners.

Manufacturer

Wacker Neuson Production Americas LLC

N92W15000 Anthony Avenue

Menomonee Falls, WI 53051 U.S.A.

Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957

www.wackerneuson.com

Original instructions

This Operator’s Manual presents the original instructions. The original

language of this Operator’s Manual is American English.

Foreword

wc_tx001710gb.fm 3

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for

the machine models listed below. These instructions must be followed during

installation and maintenance of the generator (and battery, if equipped).

Machines

covered in

this manual

Machine

documentation

From this point forward in this documentation, Wacker Neuson Production

Americas LLC will be referred to as Wacker Neuson.

Keep a copy of the Operator’s Manual with the machine at all times.

Use the separate Parts Book supplied with the machine to order replacement

parts.

Refer to the separate Repair Manual for detailed instructions on servicing and

repairing the machine.

If you are missing any of these documents, please contact Wacker Neuson to

order a replacement or visit www.wackerneuson.com.

When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.

Expectations

for

information in

this manual

This manual provides information and procedures to safely operate and

maintain the above Wacker Neuson model(s). For your own safety and to

reduce the risk of injury, carefully read, understand, and observe all instructions

described in this manual.

Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its

machines.

The information contained in this manual is based on machines manufactured

up until the time of publication. Wacker Neuson reserves the right to change

any portion of this information without notice.

CALIFORNIA

Proposition

65 Warning

Engine exhaust, some of its constituents, and certain vehicle components, contain

or emit chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm.

Laws

pertaining to

spark

arresters

NOTICE: State Health Safety Codes and Public Resources Codes specify that in

certain locations spark arresters be used on internal combustion engines that use

hydrocarbon fuels. A spark arrester is a device designed to prevent accidental dis-

charge of sparks or flames from the engine exhaust. Spark arresters are qualified

and rated by the United States Forest Service for this purpose. In order to comply

with local laws regarding spark arresters, consult the engine distributor or the local

Health and Safety Administrator.

Manufacturer’s

approval

This manual contains references to approved parts, attachments, and modifica-

tions. The following definitions apply:

Machine Item Number

GP 6600A

GPS 6600A

0620384, 0620385, 0620100, 0620101

0620386, 0620102

Foreword

4 wc_tx001710gb.fm

Approved parts or attachments are those either manufactured or provided by

Wacker Neuson.

Approved modifications are those performed by an authorized Wacker

Neuson service center according to written instructions published by Wacker

Neuson.

Unapproved parts, attachments, and modifications are those that do not

meet the approved criteria.

Unapproved parts, attachments, or modifications may have the following conse-

quences:

Serious injury hazards to the operator and persons in the work area

Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about

approved or unapproved parts, attachments, or modifications.

wc_bo5000186340_04TOC.fm 5

Table of Contents

GP/GPS 6600A

Foreword 3

1 Safety Information 7

1.1 Signal Words Used in this Manual ....................................................... 7

1.2 Machine Description and Intended Use ............................................... 8

1.3 Operating Safety .................................................................................. 9

1.4 Operator Safety while Using Internal Combustion Engines ............... 11

1.5 Service Safety .................................................................................... 12

2 Labels 14

2.1 Label Locations .................................................................................. 14

2.2 Label Meanings .................................................................................. 15

3 Operation 19

3.1 Determining Power Requirements ..................................................... 20

3.2 Installation .......................................................................................... 21

3.3 Recommended Fuel ........................................................................... 21

3.4 Battery Tray Installation (GPS only) ................................................... 22

3.5 Wheel Kit ............................................................................................ 23

3.6 Generator Derating ............................................................................. 25

3.7 Grounding the Generator ................................................................... 26

3.8 Operating Heavy Loads ...................................................................... 26

3.9 Use of Extension Cords ...................................................................... 27

3.10 Control Panel ...................................................................................... 28

3.11 Ground Fault Interrupt (GFI / GFCI) ................................................... 29

3.12 Twist-Lock Receptacles ..................................................................... 30

3.13 Engine Auto Idle ................................................................................ 30

3.14 Engine Speed ..................................................................................... 30

3.15 Voltage Selector Switch ..................................................................... 31

3.16 Before Starting ................................................................................... 32

3.17 Starting ............................................................................................... 32

3.18 Stopping ............................................................................................. 33

3.19 Emergency Shutdown Procedure ....................................................... 34

6 wc_bo5000186340_04TOC.fm

Table of Contents GP/GPS 6600A

4 Maintenance 35

4.1 Maintaining the Emission Control System ...........................................35

4.2 Periodic Maintenance Schedule ..........................................................35

4.3 Engine Oil ............................................................................................36

4.4 Servicing the Air Cleaner .....................................................................37

4.5 Spark Plug ...........................................................................................38

4.6 Cleaning the Sediment Cup ................................................................39

4.7 Carburetor Adjustment ........................................................................40

4.8 Engine Speed ......................................................................................40

4.9 Long-Term Storage .............................................................................41

4.10 Transporting the Machine ....................................................................41

4.11 Troubleshooting ...................................................................................42

5 Technical Data 43

5.1 Generator ............................................................................................43

5.2 Engine .................................................................................................45

6 Emission Control Systems Information and Warranty 47

6.1 Emission Control System Background Information .............................47

6.2 Limited Defect Warranty for Wacker Neuson Emission Control

Systems ...............................................................................................48

7 Schematics 52

7.1 Wire Colors ..........................................................................................52

7.2 US Machines—Electrical Schematic ...................................................52

7.3 CSA Machines—Electrical Schematic .................................................54

7.4 Engine Wiring ......................................................................................56

GP/GPS 6600A Safety Information

wc_si000240gb.fm 7

1 Safety Information

1.1 Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION, NOTICE, and

NOTE signal words which must be followed to reduce the possibility

of personal injury, damage to the equipment, or improper service.

NOTICE: Used without the safety alert symbol, NOTICE indicates a

situation which, if not avoided, could result in property damage.

Note: A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

fObey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

fTo avoid death or serious injury from this type of hazard, obey all safety messages that

follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

fTo avoid possible death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

fTo avoid possible minor or moderate injury from this type of hazard, obey all safety

messages that follow this signal word.

Safety Information GP/GPS 6600A

8wc_si000240gb.fm

1.2 Machine Description and Intended Use

This machine is a portable electric power source. The Wacker

Neuson Portable Generator consists of a tubular steel frame

surrounding a fuel tank, a gasoline engine, a control panel, and an

electric alternator. The control panel includes controls and

receptacles. As the engine runs, the generator converts mechanical

energy into electric power. The operator connects loads to the electric

power receptacles.

This machine is intended for the purpose of supplying electrical power

to connected loads. Refer to the product specifications for the output

voltage and frequency of this generator, and the maximum output

power limit of this generator.

This machine has been designed and built strictly for the intended use

described above. Using the machine for any other purpose could

permanently damage the machine or seriously injure the operator or

other persons in the area. Machine damage caused by misuse is not

covered under warranty.

The following are some examples of misuse:

Connecting a load that has voltage and frequency requirements that

are incompatible with the generator output

Overloading the generator with a load that draws excessive power

during either continuous running or start-up

Operating the generator in a manner that is inconsistent with all

federal, state and local codes and regulations

Using the machine as a ladder, support, or work surface

Using the machine to carry or transport passengers or equipment

Operating the machine outside of factory specifications

Operating the machine in a manner inconsistent with all warnings

found on the machine and in the Operator’s Manual

This machine has been designed and built in accordance with the

latest global safety standards. It has been carefully engineered to

eliminate hazards as far as practicable and to increase operator

safety through protective guards and labeling. However, some risks

may remain even after protective measures have been taken. They

are called residual risks. On this machine, they may include exposure

to:

Heat, noise, exhaust, and carbon monoxide from the engine

Fire hazards from improper refueling techniques

Fuel and its fumes

Electric shock and arc flash

GP/GPS 6600A Safety Information

wc_si000240gb.fm 9

Personal injury from improper lifting techniques

To protect yourself and others, make sure you thoroughly read and

understand the safety information presented in this manual before

operating the machine.

1.3 Operating Safety

Operator qualifications

Only trained personnel are permitted to start, operate, and shut down

the machine. They also must meet the following qualifications:

• have received instruction on how to properly use the machine

• are familiar with required safety devices

The machine must not be accessed or operated by:

•children

• people impaired by alcohol or drugs

Personal Protective Equipment (PPE)

Wear the following Personal Protective Equipment (PPE) while

operating this machine:

• Close-fitting work clothes that do not hinder movement

• Safety glasses with side shields

• Hearing protection

• Safety-toed footwear

BACKFEED FROM THE GENERATOR INTO THE PUBLIC POWER

DISTRIBUTION SYSTEM CAN CAUSE SERIOUS INJURY OR

DEATH TO UTILITY WORKERS!

DANGER

Carbon monoxide. Using a generator indoors CAN KILL YOU IN MINUTES.

Generator exhaust contains carbon monoxide (CO). This is a poison you cannot

see or smell. If you can smell the generator exhaust, you are breathing CO. But

even if you cannot smell the exhaust, you could be breathing CO.

fNEVER use a generator inside homes, garages, crawlspaces, or other partly

enclosed areas. Deadly levels of carbon monoxide can build up in these areas.

Using a fan or opening windows and doors does NOT supply enough fresh air.

fONLY use a generator outside and far away from windows, doors, and vents.

These openings can pull in generator exhaust.

fEven when you use a generator correctly, CO may leak into the home. ALWAYS

use a battery-powered or battery-backup CO alarm in the home.

fIf you start to feel sick, dizzy, or weak after the generator has been running,

move to fresh air RIGHT AWAY. See a doctor. You could have carbon monoxide

poison.

DANGER

Safety Information GP/GPS 6600A

10 wc_si000240gb.fm

Improper connection of generator to a building’s electrical system can

allow electrical current from the generator to backfeed into utility lines.

This may result in electrocution of utility workers, fire, or explosion.

Connections to a building’s electrical system must be made by a

qualified electrician and comply with all applicable laws and electrical

codes.

If connected to a building’s electrical system the generator must meet

the power, voltage, and frequency requirements of the equipment in

the building. Differences in power, voltage, and frequency

requirements may exist and improper connection may lead to

equipment damage, fire, and personal injury or death.

Familiarity and proper training are required for the safe operation of the

machine. Machines operated improperly or by untrained personnel

can be hazardous. Read the operating instructions contained in this

manual and the engine manual, and familiarize yourself with the

location and proper use of all controls. Inexperienced operators should

receive instruction from someone familiar with the machine before

being allowed to operate it.

1.3.1 NEVER operate the generator when open containers of fuel, paint, or

other flammable liquids are near.

1.3.2 NEVER operate the generator, or tools attached to the generator, with

wet hands.

1.3.3 NEVER use worn electrical cords. Severe electrical shock and

equipment damage may result.

1.3.4 NEVER run the electrical cords under the generator, or over vibrating

or hot parts.

1.3.5 NEVER enclose or cover the generator when it is in use or when it is

hot.

1.3.6 NEVER overload the generator. The total amperage of the tools and

equipment attached to the generator must not exceed the load rating

of the generator.

1.3.7 NEVER operate the machine in snow, rain, or standing water.

1.3.8 NEVER allow untrained personnel to operate or service the generator.

The generator set should be set up by a certified electrician.

1.3.9 NEVER stand on the machine.

1.3.10 DO NOT stand under the machine while it is being hoisted or moved.

1.3.11 DO NOT attach equipment to the machine when it is suspended.

1.3.12 Store the machine properly when it is not being used. The machine

should be stored in a clean, dry location out of the reach of children.

1.3.13 ALWAYS position and operate the generator on a firm,

noncombustible, level surface.

1.3.14 ALWAYS transport the generator in an upright position.

WARNING

GP/GPS 6600A Safety Information

wc_si000240gb.fm 11

1.3.15 ALWAYS keep the machine at least one meter (three feet) away from

structures, buildings, and other equipment during use.

1.3.16 ALWAYS keep the area immediately surrounding and underneath the

machine clean, neat, and free of debris and combustible materials.

Make sure that the area overhead is clear of debris that could fall onto

or into the machine or exhaust compartment.

1.3.17 ALWAYS remove all tools, cords, and other loose items from the

generator before starting it.

1.3.18 ALWAYS make certain the machine is well-grounded and securely

fastened to a good earthen ground per national and local regulations.

1.4 Operator Safety while Using Internal Combustion Engines

Refueling safety

When refueling the engine:

• Do not smoke.

• Do not refuel if the generator is sitting in a truck fitted with a

plastic bed liner. Static electricity can ignite the fuel or fuel vapors.

• Do not refuel a hot or running engine.

• Do not refuel the engine near an open flame.

When refueling the engine, always:

• Refill the fuel tank in a well-ventilated area.

• Replace the fuel tank cap after refueling.

WARNING

Internal combustion engines present special hazards during operation and fueling.

Failure to follow the warnings and safety standards could result in severe injury or

death.

fRead and follow the warning instructions in the engine owner’s manual and the

safety guidelines below.

DANGER

fCarbon monoxide. Using a generator indoors CAN KILL YOU IN MINUTES.

Generator exhaust contains carbon monoxide (CO). This is a poison you cannot

see or smell. If you can smell the generator exhaust, you are breathing CO. But

even if you cannot smell the exhaust, you could be breathing CO.

Safety Information GP/GPS 6600A

12 wc_si000240gb.fm

Operating safety

When operating the generator:

• Check the fuel lines and the fuel tank for leaks and cracks before

starting the engine.

• Do not run the machine if fuel leaks are present or the fuel lines

are loose.

• Do not run the engine near open flames.

• Do not start the engine if fuel has spilled or a fuel odor is present.

Move the generator away from the spill and wipe the generator

dry before starting.

• Do not smoke while operating the machine.

Generator vibration

Generators vibrate in normal use. During and after the use of the

generator, inspect the generator as well as extension cords and

power supply cords connected to it for damage from vibration.

• Have damaged items repaired or replaced as necessary.

• Do not use plugs or or cords that show signs of damage such as

broken or cracked insulation or damaged blades.

1.5 Service Safety

Poorly maintained equipment can become a safety hazard! In order

for the equipment to operate safely and properly over a long period of

time, periodic maintenance and occasional repairs are necessary. If

the generator is experiencing problems or is being serviced, attach a

“DO NOT START” sign to the control panel to notify other people of its

condition.

Personal Protective Equipment (PPE)

Wear the following Personal Protective Equipment (PPE) while

servicing or maintaining this machine:

• Close-fitting work clothes that do not hinder movement

• Safety glasses with side shields

• Hearing protection

• Safety-toed footwear

In addition, before servicing or maintaining the machine:

• Tie back long hair.

• Remove all jewelry (including rings).

WARNING

GP/GPS 6600A Safety Information

wc_si000240gb.fm 13

1.5.1 Do not use gasoline or other types of fuels or flammable solvents to

clean parts, especially in enclosed areas. Fumes from fuels and

solvents can become explosive.

1.5.2 DO NOT attempt to clean or service the machine while it is running.

1.5.3 Do not modify the machine without the express written approval of the

manufacturer.

1.5.4 DO NOT allow water to accumulate around the base of the machine.

If water is present, move the machine and allow the machine to dry

before servicing.

1.5.5 DO NOT service the machine if your clothing or skin is wet.

1.5.6 DO NOT allow untrained personnel to service this equipment. Only

trained electrical technicians should be allowed to service the electrical

components of this equipment.

1.5.7 Keep the machine clean and labels legible. Replace all missing and

hard-to-read labels. Labels provide important operating instructions

and warn of dangers and hazards.

1.5.8 ALWAYS replace the safety devices and guards after repairs and

maintenance.

1.5.9 ALWAYS let the engine cool before transporting or servicing the

machine.

1.5.10 ALWAYS keep hands, feet, and loose clothing away from the moving

parts on the generator and engine.

1.5.11 ALWAYS turn the engine off before servicing the machine. If the

engine has electric start, disconnect the negative terminal on the

battery before servicing the machine.

1.5.12 ALWAYS keep the fuel lines in good condition and properly connected.

Leaking fuel and fumes are extremely explosive.

1.5.13 When replacement parts are required for this machine, use only

Wacker Neuson replacement parts or those parts equivalent to the

original in all types of specifications, such as physical dimensions,

type, strength, and material.

Labels GP/GPS 6600A

14 wc_si000561gb.fm

2Labels

2.1 Label Locations

wc_gr003142

GP/GPS 6600A Labels

wc_si000561gb.fm 15

2.2 Label Meanings

Wacker Neuson machines use international pictorial labels where

needed. These labels are described below.

AEngine Choke Control

BWARNING!

Hot surface!

—DANGER!

Read the Operator’s Manual.

No sparks, flames, or burning objects near

the machine.

Stop the engine before refueling.

—

GFCI TEST INSTRUCTIONS - TEST BEFORE EACH USE

Normal operating state - sensing device green LED is "ON" and circuit breaker is at "ON"

position.

Step 1: Press "TEST" button. Green LED should go "OUT" and red LED should come "ON" and

circuit breaker should trigger to "OFF" position.

Step 2: If sensing device LED or breaker does not trip or change state, "DO NOT USE". Consult

an electrician for assistance.

Step 3: Press "RESET" button. Red LED should turn "OFF" and green LED should turn "ON".

Step 4: Manually reset (switch) circuit breaker to "ON" position to restore circuit power.

Labels GP/GPS 6600A

16 wc_si000561gb.fm

—

—CAUTION!

Use only clean, filtered gasoline fuel.

Check the fuel level.

—Open the fuel flow valve.

—Close the choke.

—Turn the engine switch to the ON position.

—Pull the rewind starter.

—Open the choke.

—Turn the engine switch to “OFF”.

GP/GPS 6600A Labels

wc_si000561gb.fm 17

—Close the fuel flow valve.

—DANGER

Using a generator indoors CAN KILL YOU IN MINUTES. Generator exhaust contains carbon

monoxide. This is a poison you cannot see or smell.

—NEVER use inside a home or garage, EVEN

IF doors and windows are open.

—Only use OUTSIDE and far away from

windows, doors, and vents.

—WARNING!

To reduce the risk of electrical shock and arc

flash, read the Operator’s Manual. Improper

connection of the generator to a building’s

electrical system can allow electrical current

from the generator to backfeed into utility

lines. This may result in electrocution of utility

workers, fire, or explosion. Connections to a

building’s electrical system must be made by a

qualified electrician and comply with all

applicable laws and electrical codes.

ENOTICE

Lifting point.

FElectrical ground

GND

88897

Labels GP/GPS 6600A

18 wc_si000561gb.fm

GWARNING

Operation of this equipment may create

sparks that can start fires around dry

vegetation. A spark arrester may be required.

The operator should contact local fire

agencies for laws or regulations relating to fire

prevention requirements.

JA nameplate listing the model number, item

number, revision number, and serial number

is attached to each unit. Please record the

information found on this nameplate so it will

be available should the nameplate become

lost or damaged. When ordering parts or

requesting service information, you will always

be asked to specify the model number, item

number, revision number, and serial number

of the unit.

KThis machine may be covered by one or more

patents.

LWARNING!

Test GFCI before each use.

See label above.

MThis equipment does not meet California EVP

emission regulations for small off-road

engines.

NEmission Control Information

This equipment meets U.S. EPA EVAP

standards.

Evaporative Family: BWIXNHEQCL2

GP/GPS 6600A Operation

wc_tx000792gb.fm 19

3 Operation

Preparing for first use

To prepare your machine for first use:

3.0.1 Make sure all loose packaging materials have been removed from the

machine.

3.0.2 Check the machine and its components for damage. If there is visible

damage, do not operate the machine! Contact your Wacker Neuson

dealer immediately for assistance.

3.0.3 Take inventory of all items included with the machine and verify that

all loose components and fasteners are accounted for.

3.0.4 Attach component parts not already attached.

3.0.5 Add fluids as needed and applicable, including fuel, engine oil, and

battery acid.

3.0.6 Move the machine to its operating location.