JUMPSTARTWARNINGS
• Lead-acid batteries can release explosive gasses. Failure to follow instructions may
causepropertydamage,explosionhazard,and/orpersonalinjury.
• Donotsmokewhilejumpstarting.
• Jumpstartavehicleorboatinawellventilatedarea.
• PowerDomeisforusewith12voltsystems.
• Donotattempttojumpstartafrozenbattery.
• Do not wear vinyl clothing when jumpstarting - friction can cause static electricity
sparks.
• Removeallmetaljewelry-thiscancauseshortcircuits.Alwaysusesafetyglasseswhen
jumpstartingbatteryacidcancauseblindnessand/orsevereburns.
• Never touch red and black clamps together - this can cause, power arcing, and/or
explosion.
• Donotattempttojumpstartafrozenbattery
• After use as jump starter, turn OFF Power Safety Switch. Keep out of reach of
children.
• Excessiveenginecrankingcandamagethevehicle‘sstartermotor.Iftheenginefailsto
startaftertherecommendednumberofattempts,discontinuejumpstartprocedureand
lookforotherproblemsthatmayneedtobecorrected.
• Ifvehicle tobe startedhas a PositiveGrounded System(positive battery terminalis
connectedtochassis):
• Connectnegative(-)blackclamptovehiclebattery‘snegativeterminal.
• Connect positive (+) red clamp to vehicle chassis or a solid, non-moving, metal
vehiclecomponentorbodypart.DONOTclampdirectlytopositivebatteryterminal
ormovingpart.
JUMPSTARTING
1. ReviewtheJumpstartWarnings
2. Makesureallvehicleappliances,lights,radio,etc.areturnedOFF.
3. Makesurethevehicle’sbrakeissetandthetransmissionisin“Park”
4. MakesureallPowerDomeswitchesareOFF.
5. Securely connect the Red (+) cable Clamp to the vehicle’s Positive (+) battery
terminal.
6. ConnecttheBlack(-)cableClamptoanon-movingpartonthevehicle.
7. ObservethecoloroftheREVERSEPOLARITYLEDthatislocatedbetweentheBattery
StatusandWorkLightSwitches.
8. IftheLEDisRED–DONOTTURNONTHECABLEJUMPERSWITCH
• CableClampsneedtobereversed.
• DisconnecttheBlackClampfirstandthentheREDCableClamp.
• ReconnectandobservetheLED.
• IftheLEDisgreen,turnONtheJumperSafetySwitch.
9. Insidethevehicle,turnontheignitionswitchandattempttostarttheengine.
10.Crank a maximum of three seconds. If the engine does not start, wait three minutes
beforethenextattempt.
11.Aftertheenginestarts,turnOFFtheJumperSafetySwitch.
12.DisconnecttheBlackClampfirst,andthendisconnecttheRedClamp.
13.Besurethatthecablesandclampsaresecurelystored.
14.RechargethePowerDomeassoonasconvenient.
NOTE:Iftheenginedoesnotstart,theremaybeaproblemotherthanadischargedbattery.
Callforservice.
USBPOWERPORT
SetOn/Offsafetyswitchtothe“USBport”position.AUSBPowerPortlocatedunderneath
thechargingjackcanpower/chargedevicesthatrequire5Voltsatupto500mAthroughthe
useofauser-suppliedcord.
EXTENDINGRUNTIME
ExtendingtheruntimeofPowerDome’sinverterorcompressorcanbeaccomplishedby
poweringthesefunctionsfromachargedexternal12voltautomotive-typebattery.
1. Followtheprocedureforjumpstartinganengineasfarasconnectingthecableschecking
forcorrectbatterypolarityandturningontheCableSwitch.
2. Nowthecompressororinvertercanoperateforanextendedtime.
• Thelowvoltageprotectionfeaturewillshutofftheinverterwhentheexternaland
internalbatteriesdischargeto10volts.
• Thecompressor doesnot have alow battery shut-downfeature so theuser must
checktheBatteryStatusmeteronthePowerDome.
3. After The Power Dome is used in an extended run time configuration, turn off the
compressororinverter.
4. TurnofftheCableSwitchandstorethecablesandclamps.
5. RechargethePowerDomeandexternalbatteryassoonaspossible.