Wali GSWM002 User manual

INSTALLATION MANUAL
[email protected]
75x75/100x100 MAX
(2~6.5kg)x2
(4.4~14.3lbs)x2
RATED
27”
GSWM002
Dual Monitor Wall Mount

2
Supplied Parts List
Arm
A (x1)
Cover
C (x3)
VESA Plate
B (x2)
Allen Key 5mm
D (x1)
M5x12 Bolt
M-B (x8)
Φ10x45 Anchor
W-B (x3)
M4x12 Bolt
M-A (x8)
D5 Washer
M-C (x8)
ST6.3x55 Screw
W-A (x3)
Washer
W-C (x3)

3
Step 1
A
Option A
Wood Stud
X
W-A
W-C
W-A
W-C
3. Attach the mount to wood stud and tighten using Screw W-A & D5 Washer W-C with a screwdriver.
(Screwdriver not included)
1. If installing this product on wood stud, mark the position with Bubble Level & pencil
on the wall.
2. Drill 3/16"(4.5mm) diameter x 2.2”(55mm) length holes at the marked position.
Stud Finder

4
55
10
8
Option B
Concrete Wall
2. Drill 3/8"(10mm) diameter x 2.2”(55mm) length holes at the marked position.
W-B
W-A
W-C
W-A
W-B
W-C
1. If installing this product on concrete wall, mark the position with Bubble Level &
pencil on the concrete wall.
3. Insert the Anchor W-B into the mounting holes. Attach the mount to concrete wall and tighten using Screw W-A
& Washer W-C with a screwdriver. (Screwdriver not included)

Step 2
Step 3
5
Step 3.1
Select TV Screws
Step 3.2
M-C M-C
M-A M-B
D
A
c
C
Fix Cover Conto the front of mount part.
Attach the VESA Plate Bto your TV/Monitor, and thread M4x12 Bolt M-A or M5x12 Bolt M-B into the mounting
holes with D5 Washer M-C , tighten with Allen Key 5mm D.

Step 4
Step 5
Step 6
6
D
D
Put the assembled TV/Monitor onto the Arm Aand ensure the stability, tighten the VESA Plate Busing Top Screw.
Detach the Top Screw by threading it counterclockwise.
Press the Arm Aon horizontal level as image shown, adjust gas spring tension to your personal preference using Allen Key
5mm D. Adjust the tilt tension using Allen Key 5mm D.
For Heavier Monitors
For Lighter Monitors
· Insert the 5mm Allen Key into the adjusting hole and turn clockwise (-) to reduce gas spring tension, suitable for lighter screens.
· Insert the 5mm Allen Key into the adjusting hole and turn counter-clockwise (+) to increase gas spring tension, suitable for heavier screens.
· Please take note it may take numerous turns for gas spring tension adjustment.
A

Step 7
7
Manually swivel, tilt, and rotate the monitor for the best viewing angle.
Guide the cables through and put the cable cases back.Step 8
Step 9
DD
Screw out the bolts with Allen Key 5mm Dand take off the
cable cases.
C
C
2
1
D
1
2
C
2
1
D
1
+75°
-45°
±180°
±45°
±180°
±90°

.1-844-SATTLER (18447288537) [email protected]
If you have any questions,please contact us.

We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.
www.walielectric.com