Walker Edison TW60W User manual

Item #: TW60W
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 12/2011

General Assembly Guidelines
I. Insure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to insure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main types of hardware used to assemble this product are wood dowels, nuts, bolts,
and screws.
V. A Phillips head screwdriver is required for the assembly of this product.
VI. Power tools should not be used to assemble this product.
P.2

Parts List

Hardware List
Wrench
Foot

Assembly Options
Option A
To build this option, follow Steps 1-6.
Option B
To unfold table leaf, follow Steps 7-9.

Insert dowels (A) into crossbars (3).
Insert nuts (C) into crossbars (3). Attach crossbars (3) to leg piece (2) using bolts (B). Tighten bolts (B) with
wrench (G). Bolts (B) will screw directly into nuts (C).

Screw feet (E) into leg pieces (2). Insert wood buttons (F) into leg pieces (2).
Insert nuts (C) into opposite ends of crossbars (3). Attach crossbars (3) to second leg piece (2) using bolts
(B). Tighten bolts (B) with wrench (G). Bolts (B) will screw directly into nuts (C).

Attach leg pieces (2) to table top (1) using screws (D). Tighten all screws (D) with a screwdriver.
Option A
Final Assembly

Carefully pull table apart.
Carefully unfold center leaf of table.

Option B
Final Assembly