walkntalk PWT-B20K User manual

– 2 YEAR WARRANTY
WalknTalk will replace the faulty product at no cost to the
consumer. The warranty does not extend to any
consequential damages or cost that may be incurred and
is valid for 24 months from date of purchase. The
consumer must return the faulty product to the retail
store it was purchased from together with proof of
purchase.
The warranty is provided by:
Pacific Optics (in Australia)
18 Taree St, Burleigh Heads, QLD 4220
Telephone: [phone]
Email: [email protected]
Signature Marketing NZ Ltd (in New Zealand)
25a Triton Drive, Rosedale, Auckland 0632
Telephone (NZ): [phone]
Email (NZ): [email protected]
The benefits to the consumer under this warranty are in
addition to other rights and remedies of the consumer
under Australian laws in relation to the goods to which
the warranty relates. Our goods come with guarantees
that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Quick Start Guide
What’s included:
Product Overview:
PWT-B20K
Fast
Charge
20000mAh
Power Bank
with 45W USB-C
Power Delivery
and Quick Charge
i
USB-A Port OUT
USB-C Port IN/OUT
USB-A Port OUT
Power Button
Digital Display
Micro USB Port IN
Front

Specifications
Stay Connected
1 Charging your devices
.2 Recharging your power bank
.
For the most up-to-date assistance, please scan this
QR Code to download the full User Manual before
using this product.
3. Download user manual
.
@walkntalk_ walkntalk.com.au@walkntalkau
Battery Capacity: 74Wh, 3.7V 20000mAh
Battery Type: Li-Polymer
Micro USB Input: 5V/2A, 9V/2A 18W Max.
USB-C Input: 5V/3A, 9V/2A,12V/1.5A,15V/2.66A, 20V/2A 40W Max.
USB-C Output: 5V/3A, 9V/3A,12V/3A,15V/3A, 20V/2.25A 45W Max.
USB A1/A2 Output: 5V/5A, 9V/2A,12V/1.5A 25W Max.
Combined Output (using 2 or more ports): 5V/3A 15W Max.
Connect your device by using a compatible USB
charging cable. Insert a USB-A or USB-C cable
connector into your chosen output port on the
power bank.
Once connected, the power bank will automatically
start charging and the digital display will indicate
the percentage of battery remaining.
Connect your power bank to a suitable USB power
source to recharge it. The power bank can be
recharged via the USB-C port (40W Max) or Micro
USB port (18W Max). When recharging the power
bank, the % will flash on the digital display.
Handy hints:
- Charging should start automatically when you
connect a cable. For devices with very low current
draw, you may need to long press the power button to
initiate charging via USB-A.
- To charge devices with high power requirements,
such as laptops, you should use only the USB-C port.
If more than 1 output port is in use, a maximum of 15W
will be shared for charging all connected devices.
- As a safety precaution, the power bank will
temporarily stop charging or recharging if it gets too
hot and the display will flash "188%".
If the power bank is fast charging (requires fast charge
cable and device), a “ ” symbol will show on screen.
When the power bank has less than 5% battery
remaining, the digital display will flash to indicate it is
time to recharge the power bank.
Back