WamBam MS29998 User manual

WWW.WAMBAMFENCE.COM 1
ASSEMBLY INSTRUCTIONS MS29998
MS29998
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
DOUBLE GATE KIT
WITH DROP ROD
WWW.WAMBAMFENCE.COM VER. 080421

WWW.WAMBAMFENCE.COM
2
ASSEMBLY INSTRUCTIONS
MS29998
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
care department.
parts.nychbrands.com
[e-mail]
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number MS29998 
found on page 4. It is helpful if you can provide the batch lot
which is a stamped number inside the box.
Please give us a call at 704-892-5222 / 877-778-5733.

this product, we are happy to assist you with the process.
If for some reason you need to return this product, please

return the product, 

GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.WAMBAMFENCE.COM 3
ASSEMBLY INSTRUCTIONS MS29998
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
2”
2”
11”
4”
Surface
110 1/2 in
103 1/2 in
4 in

WWW.WAMBAMFENCE.COM
4
ASSEMBLY INSTRUCTIONS
MS29998
A B
STEP 1: LAY OUT MATERIALS

 (8)
C D
E
 (2)
 (1)
4” x 4” x 57”
 (1)
4” x 4” x 54”
 (1)

 (4)

WWW.WAMBAMFENCE.COM 5
ASSEMBLY INSTRUCTIONS MS29998
STEP 2: INSTALL DROP ROD
STEP 2.1
STEP 2.3
13”
4”
STEP 2.2
Note: Make sure
the raised stops are
between the brackets
before fastening the
top bracket.
C
C

of the drop rod on
the ground and
move the gate out
of the way.
If you have a con-
crete surface, drill
a 1” diameter hole
2.5” deep.
If you have a dirt
surface, create a 1”
diameter hole 6”
deep and insert a
1” diameter PVC or
steel pipe to pre-
vent debris from

Stops
Center and
level (1) Drop Rod
Bracket (C) as
shown. The top of
the bracket should
be 13” from the
ground or 11” from

gate as shown.
Fasten the bracket

Stainless Steel
Screws (E).
Insert the Drop
Rod (C) into the top
bracket and insert
the rod into the

shown. Measure
4” between the
brackets and fasten

hex head screws.
E
1” diameter x
6” long PVC or
steel pipe

WWW.WAMBAMFENCE.COM
6
ASSEMBLY INSTRUCTIONS
MS29998
STEP 3: 
STEP 3.1
1.
stop on the rod through the notch in the bracket. Rest the stop on the top of the
bracket and turn 90 degrees to lock as shown.
2. 
the stop with the notch in the top bracket. The stop on the rod will rest on the

1 2
90

WWW.WAMBAMFENCE.COM 7
ASSEMBLY INSTRUCTIONS MS29998
Surface
Down Position
Surface
Up Position

WWW.WAMBAMFENCE.COM
8
ASSEMBLY INSTRUCTIONS
MS29998
STEP 4.1
STEP 4: INSTALL DOUBLE GATE JIG
A
B
D
Insert the Gate Jig part 1 (A) into the Gate Jig part 1 (B). 
Self-Drilling Screws (D) into the gate jig part 2 as shown below to secure the jig.

WWW.WAMBAMFENCE.COM 9
ASSEMBLY INSTRUCTIONS MS29998
WWW.WAMBAMFENCE.COM
704-892-5222
877-778-5733
[e-mail]
6935 Reames Rd. Ste. K.
Charloe, NC 28216