WamBam VG26100 User manual
WWW.WAMBAMFENCE.COM 1
ASSEMBLY
INSTRUCTIONS VG26100
VG26100
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
STEADY
FREDDY
VINYL GATE
WWW.WAMBAMFENCE.COM VER. 061621
WWW.WAMBAMFENCE.COM
2
ASSEMBLY
INSTRUCTIONS
VG26100
kCheck the inside of the larger pieces in your box for other
materials packed inside.
k
k
unobstructed assembling.
k
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
care department.
parts.nychbrands.com
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
number VG26100
Please give us a call at 704-892-5222 / 877-778-5733.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.WAMBAMFENCE.COM 3
ASSEMBLY
INSTRUCTIONS VG26100
understand your fence.
install your gate posts before you do anything else.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL
INFORMATION
WWW.WAMBAMFENCE.COM
4
ASSEMBLY
INSTRUCTIONS
VG26100
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
Ground
(Large)
2in.
3in.
.
73in.
72in.
.
.
in.
7.
7.
in.
A
C D
s
C
D
WWW.WAMBAMFENCE.COM 5
ASSEMBLY
INSTRUCTIONS VG26100
STEP 1:
LAY OUT MATERIALS
M
N
O
P
Q
R
S
Hinge (2)
1¼
1¼
Tension Pin
A
E
H
K
B C D
(2)
(2)
Metal Post
F
I
L
J
G
(2)
Gate Jig
Note: Marked
with scker
labeled “1”.
Note: Marked
with scker
labeled “2”.
Note: Marked
with scker
labeled “3”.
Note: Marked
with scker
labeled “4”.
WWW.WAMBAMFENCE.COM
6
ASSEMBLY
INSTRUCTIONS
VG26100
STEP 2:
STEP 2.1 STEP 2.2
Stabilizer and pound it into the ground.
into the metal post stabilizer and determine
Place the Gate Jig
metal post stabilizer.
stabilizer.
your anchors.
Note: The metal post
stabilizer is only used
for the hinge side post.
5½”
C
G
STEP 2.3
STEP 2.5 STEP 2.6
STEP 2.4
WWW.WAMBAMFENCE.COM 7
ASSEMBLY
INSTRUCTIONS VG26100
STEP 2.7
Make sure to fasten the fence panels
STEP 3:
ASSEMBLE
STEP 3.1
.
opposite corner bracket.
into the
corner brackets
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
A
H
F
STEP 3.2 STEP 3.3
WWW.WAMBAMFENCE.COM
8
ASSEMBLY
INSTRUCTIONS
VG26100
STEP 4:
STEP 5:
ASSEMBLE GATE FRAME TOP
STEP 4.1
STEP 5.1 STEP 5.2
STEP 4.2
Insert the Top Rail
as illustrated.
I
B
E
JKL
WWW.WAMBAMFENCE.COM 9
ASSEMBLY
INSTRUCTIONS VG26100
STEP 6:
STEP 7:
STEP 6.1
STEP 7.1 STEP 7.2
STEP 6.2
onto the brackets
.
Fasten the Latch Finger onto the
stainless
.
48”
M
Q
L
P
Note: The lower
hinge will be
installed below the
two screws on the
side of the boom
corner bracket.
WWW.WAMBAMFENCE.COM
10
ASSEMBLY
INSTRUCTIONS
VG26100
STEP 8:
STEP 8.1
STEP 8.2
Double check that the gate is square
D
WWW.WAMBAMFENCE.COM 11
ASSEMBLY
INSTRUCTIONS VG26100
STEP 9:
GATE AND
Align the gate to the horizontal fence rails.
STEP 9.1
Note: Both the fence & gate hori-
zontal rail spacing can be adjusted to
lower heights.
Fasten the hinges to the
.
STEP 9.2A
Note: See the next page
on how to posion the
screws on the post side of
the hinge.
S
WWW.WAMBAMFENCE.COM
12
ASSEMBLY
INSTRUCTIONS
VG26100
STEP 9.2B
STEP 9.2C STEP 9.2D
your drill slightly as illustrated.
Note: Swing the gate open and pre-drill four more
holes for the hinge screws as illustrated.
Repeat steps
Top View
Note: Angle your drill to
pierce into the angled
poron of the post as
illustrated.
WWW.WAMBAMFENCE.COM 13
ASSEMBLY
INSTRUCTIONS VG26100
STEP 10.1 STEP 10.2
Tinsert the
into one of the holes on
the pin to release tension in the gate hinge.
STEP 10:
LEVEL GATE AND
STEP 10.3
R
WWW.WAMBAMFENCE.COM
14
ASSEMBLY
INSTRUCTIONS
VG26100
STEP 11:
STEP 11.1
Align and fasten the Latch Catch
N
WWW.WAMBAMFENCE.COM 15
ASSEMBLY
INSTRUCTIONS VG26100
ALTERNATIVE APPLICATION:
OVER A
If the
a temporary spacer.
Proceed installing
the panels according
guide.
Sidewalk/path
STEP 1.1
ALTERNATIVE APPLICATION:
OVER A
STEP 1.1
Sidewalk/path
Use the gate jig to ensure
proper spacing.
If the
mounts must be
purchased separately
and can be found by
searching product
WWW.WAMBAMFENCE.COM
16
ASSEMBLY
INSTRUCTIONS
VG26100
WWW.WAMBAMFENCE.COM
704-892-5222
877-778-5733
hmmm@wambamfence.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
Other WamBam Fencing & Gate manuals
WamBam
WamBam AG14002 User manual
WamBam
WamBam NERVOUS NELLY User manual
WamBam
WamBam VG26200 User manual
WamBam
WamBam HANDY ANDY User manual
WamBam
WamBam VF13002 User manual
WamBam
WamBam MS29998 User manual
WamBam
WamBam Slim Jim Aluminum Gate User manual
WamBam
WamBam Steady Freddy User manual
WamBam
WamBam PEEPING TOM VF16200 User manual
WamBam
WamBam NANTUCKET User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam Jiminy Picket User manual
WamBam
WamBam STURBRIDGE BL19104 User manual
WamBam
WamBam NERVOUS NELLY VG25100 User manual
WamBam
WamBam JIMINY PICKET VG24300 User manual
WamBam
WamBam VF14300 User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel... User manual
WamBam
WamBam VG24100 User manual
WamBam
WamBam BL19042 User manual
