WamBam NERVOUS NELLY VG25100 User manual
WWW.WAMBAMFENCE.COM 1
ASSEMBLY
INSTRUCTIONS VG25100
VG25100
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NERVOUS
NELLY
VINYL GATE
WWW.WAMBAMFENCE.COM VER. 052021
WWW.WAMBAMFENCE.COM
2
ASSEMBLY
INSTRUCTIONS
VG25100
kCheck the inside of the larger pieces in your box for other
materials packed inside.
k
k
unobstructed assembling.
k
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
care department.
parts.nychbrands.com
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
number VG25100
Please give us a call at 704-892-5222 / 877-778-5733.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.WAMBAMFENCE.COM 3
ASSEMBLY
INSTRUCTIONS VG25100
understand your fence.
install your gate posts before you do anything else.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL
INFORMATION
WWW.WAMBAMFENCE.COM
4
ASSEMBLY
INSTRUCTIONS
VG25100
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
Ground
(Large)
.
.
.
CD
s
C
D
A
in.
WWW.WAMBAMFENCE.COM 5
ASSEMBLY
INSTRUCTIONS VG25100
STEP 1:
LAY OUT MATERIALS
A B C
E
H
F
D
G
IJ
K
L
M
N
O
P
Q
(2)
Hinge (2)
1¼
1¼
(2) Metal Post
(2)
Gate Jig
Tension Pin
WWW.WAMBAMFENCE.COM
6
ASSEMBLY
INSTRUCTIONS
VG25100
STEP 2:
STEP 2.1 STEP 2.2
Stabilizer (C) and pound it into the ground.
into the metal post stabilizer and determine
Place Gate Jig (J)
post stabilizer.
stabilizer.
Pound your post anchors into place. See
posts.
The metal post
stabilizer is to be used
only on the hinge post.
5½”
C
J
STEP 2.3
STEP 2.5 STEP 2.6
STEP 2.4
WWW.WAMBAMFENCE.COM 7
ASSEMBLY
INSTRUCTIONS VG25100
STEP 2.7
Make sure to fasten the fence panels
STEP 3:
STEP 3.1
(E)(A).
The boom rail
is ribbed internally.
Insert fully to this point.
A
E
WWW.WAMBAMFENCE.COM
8
ASSEMBLY
INSTRUCTIONS
VG25100
corner bracket. Ensure the
(G) into the corner
(.
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
G
STEP 3.2
N
STEP 3.3
48”
WWW.WAMBAMFENCE.COM 9
ASSEMBLY
INSTRUCTIONS VG25100
STEP 4:
STEP 5:
STEP 4.1
Insert the Top Rail inside the Arch
as illustrated.
D
B
Insert fully to this point.
Insert fully to this point.
STEP 5.1 STEP 5.2 STEP 5.3
Insert the Pickets (H)
Slide the Middle Rail
H
F
1 1
2 2
3 34 4
Insert all the way
to this point.
WWW.WAMBAMFENCE.COM
10
ASSEMBLY
INSTRUCTIONS
VG25100
STEP 6:
STEP 6.1
48”
WWW.WAMBAMFENCE.COM 11
ASSEMBLY
INSTRUCTIONS VG25100
STEP 7:
STEP 7.1
K
Fasten the Latch Finger (M)
(O).
(K)
M
WWW.WAMBAMFENCE.COM
12
ASSEMBLY
INSTRUCTIONS
VG25100
STEP 8:
STEP 8.1
STEP 8.2
Double check that the gate is square
and then fasten the gate brace into
I
WWW.WAMBAMFENCE.COM 13
ASSEMBLY
INSTRUCTIONS VG25100
STEP 9:
GATE AND
Align the gate to the horizontal fence rails.
STEP 9.1
Both the fence & gate horizon-
tal rail spacing can be adjusted freely
to lower heights.
Fasten the hinges to
(P).
STEP 9.2A
See the next page
on how to posion the
screws on the post side of
the hinge.
P
WWW.WAMBAMFENCE.COM
14
ASSEMBLY
INSTRUCTIONS
VG25100
STEP 9.2B
STEP 9.2C STEP 9.2D
your drill slightly as illustrated.
through the drilled holes.
Swing the gate open and pre-drill four more
holes for the hinge screws as illustrated.
through the drilled holes.
Top View
Angle your drill to
pierce into the angled
poron of the post as
illustrated.
WWW.WAMBAMFENCE.COM 15
ASSEMBLY
INSTRUCTIONS VG25100
STEP 10.1 STEP 10.2
STEP 10:
LEVEL GATE AND
STEP 10.3
Tinsert the
(Q) into one of the holes on
hinge and rotate it to release tension on the gate
Q
WWW.WAMBAMFENCE.COM
16
ASSEMBLY
INSTRUCTIONS
VG25100
STEP 11:
STEP 11.1
Align and fasten the Latch Catch (L)
L
WWW.WAMBAMFENCE.COM 17
ASSEMBLY
INSTRUCTIONS VG25100
ALTERNATIVE APPLICATION:
OVER A
If the
a temporary spacer.
Proceed installing
the panels according
guide.
Sidewalk/path
STEP 1.1
ALTERNATIVE APPLICATION:
OVER A
STEP 1.1
Sidewalk/path
Use the gate jig to ensure
proper spacing.
If the
surface mounts
them. (purchase
WWW.WAMBAMFENCE.COM
18
ASSEMBLY
INSTRUCTIONS
VG25100
WWW.WAMBAMFENCE.COM
704-892-5222
877-778-5733
hmmm@wambamfence.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
Other WamBam Fencing & Gate manuals
WamBam
WamBam VG24100 User manual
WamBam
WamBam BL19042 User manual
WamBam
WamBam Nervous Nelly Vinyl Gate User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam STURBRIDGE BL19104 User manual
WamBam
WamBam MS29998 User manual
WamBam
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel... User manual
WamBam
WamBam VG26300 User manual
WamBam
WamBam TRADITIONAL CLASSIC VF13003 User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam SLIM JIM User manual
WamBam
WamBam Steady Freddy User manual
WamBam
WamBam NERVOUS NELLY User manual
WamBam
WamBam NANTUCKET User manual
WamBam
WamBam Steady Freddy User manual
WamBam
WamBam PEEPING TOM VF16200 User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam Yard & Pool Vinyl Gate User manual
WamBam
WamBam AG14002 User manual
WamBam
WamBam HANDY ANDY User manual
