Wamin CS-FX2 User manual
Fast Ethernet 6 Ports Switch with SFP
TEL:+886 2 2249 4199
FAX:+886 2 2249 4155
239 Qiaohe Road, Zhonghe City(235), Taipei, Taiwan
www.wamin.com
Installation Instructions
Wamin CS-FX2 Fast Ethernet 6 Ports Switch with SFP
Overview
The CS-FX2 fast Ethernet switch equipped with 6 Copper and 2 SFP ports is a powerful
and versatile device for Ethernet access and transmission distance extension over
fiber optical cables. It is mainly designed for the FTTH (fiber to the home) concept. 6
Copper ports are for 6 users, 2 Fiber ports are for the connection with distant Intranet
or FTTH service provider. It also can be deployed as a media converter with Copper
to Fiber or Single-mode to Multi-mode applications. The CS-FX2 provides several
practical and innovative functions, which can be promptly set by dip switches. The
CS-FX2 is fully compliant with IEEE802.3, IEEE802.3u, and IEEE802.3x standards. By
following up the distinct procedures in the manual, the user can easily install this
switch and monitor the real time operation status conveniently via the LED set
located at the front panel.
Front Panel of CS-FX2 Switch
Rear Panel of CS-FX2 Switch
01
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
LINK
SPEED
DUPLEX
8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8
RESETDC5V2A
Specifications
Standard:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3x Flow Control Ethernet Standards
Interface:
TP: 10Base-T/100Base-Tx RJ45, 6 ports
LED:
Power, Link, Speed, FDX
Power:
Power Supply, 5VDC, 2A
Operating temperature & humidity:
0~50°C/10%~90% (non-condensing)
Dimension:
173.2x27.1X107.4mm (WxHxD)
Weight: 500g±3%
MAC Address: 1k
Data Buffer: 512k
Optional Function:
SCA (Smart Cable Analysis), Flow Control, Aging Timer, Reserved Address Forward
Option, Port Base VLAN, Power Saving Mode, LDPS (Link Down Power Saving Mode),
MLTS detection, Broadcast Storm Protection, Aggressive Back Mode, Port 6, 7 of High
Priority, Class of Service, Max Packet Size Option, Port 6, 7 of Half Duplex
Installation
Please place the system where it will not be subject to extreme temperature
change, humidity or electromagnetic interference. Operating temperature range is
between 0°C and 50°C. Humidity should be between 10% and 90% and be
non-condensing. Please ensure adequate ventilation is provided for system cooling.
Do not block the ventilation holes on either side of the chassis. The CS-FX2 switch is a
plug-and-play device. Optional functions provided can be set by the DIP switches
mounted on the host board. Please refer to the correlative description in this
instruction manual for the settings of DIP switches.
03
LED Indicators
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
LINK
SPEED
DUPLEX
8 7 6 5 4 3 2 1
LED No. Function Status Description
1 ON Power on
POWER OFF Power off
2 LINK ON link ok
OFF link fail
Flash TX/RX
3 SPEED ON 100 Mbps
OFF 10 Mbps
4 DUPLEX ON full duplex
OFF half duplex
Flash collision
DIP Switch Settings
There are two DIP switches, SW1 and SW2, on the PCB board. The settings of DIP
switches to enable/disable optional functions are described as following;
Please remember to reset power if the DIP switch settings are changed.
For explanation of the asterisked functions, please refer to note.
Illustration of Typical Applications
IThe following examples illustrates the connection schemes when the CS-FX2 is
applied to the FTTX solution or as an add/drop media converter.
FTTX solution:
Add/Drop media converter:
1.Point to Point Application:
2.Managed Point to Multipoint Fast Ethernet or GbE extension:
05
1. Port 7 of Half Duplex: SW1: 1 ON
2. Port 7 of Full Duplex: SW1: 1 OFF (Default)
3. Port 8 of Half Duplex: SW1: 2 ON
4. Port 8 of Full Duplex: SW1: 2 OFF (Default)
5. Enable *SCA: SW1: 3 ON, SW2: 3 ON
6. Disable SCA: SW1: 3 ON, SW2: 3 OFF
7. Enable *Flow Control: SW1: 4 OFF (Default)
8. Disable Flow Control: SW1: 4 ON
9. Enable*Aging Timer: SW1: 5 OFF (Default)
10. Disable Aging Timer: SW1: 5 ON
11. Enable *Reserved Address Forward Filter: SW2: 1 ON
12. Disable Reserved Address Forward Filter: SW2: 1 OFF (Default)
13. Enable *Port Base VLAN: SW2: 2 ON
14. Disable Port Base VLAN: SW2: 2 OFF (Default)
15. Enable *Power Saving Mode: SW1: 3 OFF, SW2: 3 ON
16. Disable Power Saving Mode: SW1: 3 OFF, SW2: 3 OFF (Default)
17. Enable *LDPS SW2: 4 OFF (Default)
18. Disable LPDS SW2: 4 ON
19. Enable *MLT3_DET SW2: 5 ON
20. Disable MLT3_DET SW2: 5 OFF (Default)
21. Enable *Broadcast Storm Protection: SW2: 6 ON
22. Disable Broadcast Storm Protection: SW2: 6 OFF (Default)
23. Enable* Aggressive Back Off Mode: SW2: 7 OFF (Default)
24. Disable Aggressive Back Off Mode: SW2: 7 ON
25. Enable *Port 7,8 of High Priority: SW2: 8 ON
26. Disable Port 7,8 of High Priority: SW2: 8 OFF (Default)
27. Enable *Class of Service: SW2: 9 ON
28. Disable Class of Service: SW2: 9 OFF (Default)
29. Enable *Max Packet Size Option: SW2: 10 OFF (Default)
30. Disable Max Packet Size Option: SW2: 10 ON
100Base-Fx Fiber
100Base-Fx Fiber
Central Office
CS-FX2
CS-FX2
*OES-224A Intelligent Switch
*CS1000
*CS1000
SNMP MANAGER
CS-FX2
CS-FX2
CS-FX2
Customer Premise Equipment 10 /100Base -T(X) Auto Sensing
10 /100Base -T(X) Auto Sensing 10 /100Base -T(X) Auto Sensing
6LAN
6LAN 6LAN
Fiber Optic Links Fast Ethernet
Fiber Optic Links Fast Ethernet
Fiber Optic Links GbE
*Flow Control: This function complies with IEEE802.3x
*Aging Timer: The longest time for packets queuing in the buffer is 300s.
* Reserved Address Forward Filter: CS-Fx2 supports the ability to drop 802.1d specified
reserved group MAC address: (01-80-C2-00-00-04 to 01-80-C2-00-00-0F). Frames with
group MAC address 01-80-C2-00-00-01 (802.3x Pause), 01-80-C2-00-00-02 (802.3ad
LACP) will always be filtered.
* Port Base VLAN: Port Base VLAN groups are defined as following; (P0, P7), (P1, P7),
(P2, P7), (P3, P7), (P4, P7), (P5, P7), (P6, P7)
* Power Saving Mode: The 10M transmit amplitude is depressed in this mode.
* LDPS (Link Down Power Saving) Mode: When the system link is down, it will
automatically switch to this mode once this function is enabled. In this mode, the
system will save power up to 25% by decreasing the frequency of FLP (fast link pulse).
* MLT3_DET: CS-Fx2 supports the ability to detect MLT3 (for 10Mbps switch to
100Mbps)
* Broadcast Storm Protection: A port begins to drop packets if it receives broadcast
packets more than the defined threshold.
* Aggressive Back Off Mode: CS-Fx2 adopts modified (aggressive) back off algorithm
if this function is enabled. The maximum back off period is limited to 8-slot time. It
makes CS-Fx2 have higher transmission priority in a collision event.
* Port 6, 7 of High Priority: Packets received from port 6 or port 7 are handled as high
priority packets if the function is enabled.
* Class of Service: Packets with high priority tag are handled as high priority packets
if the function is enabled.
* Max Packet Size Option: CS-Fx2 will drop packets with length longer than 1536
bytes if the function is enabled. On the contrary, it will drop packets with length
longer than 1552 bytes.
* OES-224A is a SNMP manageable switch equipped with 24 100Mbps ports, and 2
Gigabit ports for uplink connection. All the Gigabit and 100Mbps ports are in
modular design, with TP or Fiber option. For complete specifications, please contact
Wamin Optocomm Mfg. Corporation.
* CS-1000 series 1000Base-T to 1000Base-SX/LX Media Converters are economical
and convenient choices to extend the distance between Gigabit Ethernet
connections with the use of fiber optical cable. For complete specifications, please
contact Wamin Optocomm Mfg. Corporation.
* CS110 series are the 10/100 Base-TX to 100 Base-FX media converters designed for
workgroups requiring high bandwidth fiberoptic extension of their existing Ethernet
Network. For complete specifications, please contact Wamin Optocomm Mfg.
Corporation.
07
*CS1000 *CS1000CS-Fx2 CS-Fx2
100Base-Fx Fiber 100Base-Fx Fiber 100Base-Fx Fiber
10 /100Base -T(X) Auto Sensing
6LAN
10 /100Base -T(X) Auto Sensing
6LAN
3. Daisy Chain Application:
For information of the asterisked apparatus, please refer to note.
Note:
*SCA (Smart Cable Analysis): CS-Fx2 performs SCA on TP each port and shows the
test result on LEDs. This function is valid only under Point to Point Ethernet connection
with SCA implemented on both end apparatuses. The following table shows the LED
behavior of a port performing SCA
Link_LED SPEED_LED FDX_LED
SCA initiation Scan port by port Scan port by port Scan port by port
(Under testing) Running Horse LED:
On 286ms-> Off 2s-> On 286ms-> Off 2s
Test fail On-Off-On-Off On-Off-On-Off Off
An open cable with length
On Off Off
short than 40m open
An open cable with length
Off On Off
between 40m and 80m
An open cable with length
On On Off
between 80m and 120m
An shorted cable with Flash Off Off
length shorter than 40m
An shorted cable with length
Off Flash Off
between 40m and 80m
An shorted cable with length
Flash Flash Off
between 80m and 120m
Cable is normal Off Off Off
.
How to get Help
Technical support for CS-Fx2 products can be obtained from the following sources:
Email Access
Address and Telephone
Wamin Optocomm Mfg. Corporation
Address: 239 Qiaohe Road, Zhonghe City (235), Taipei, Taiwan
TEL: 886-2-22494199 ext. 108
FAX: 886-2-22494155
The information contained in this document is subject to change without prior
notice.
Table of contents
