Wansview T01 User manual
EN Version Updated on 10 October 2018
User Manual
T01
1080P HD Trail and Hunt camera
Please go to wansview website: http://www.wansview.com for the latest instructions.
Introducon
Please read carefully the manual before using, and keep it at a safe place for your future reference
that of actual digital camera.
Important Safeguards or Warnings
memory card unrecognized for the camera or image captured by other cameras, please
1
English
What's in the Box
.1X Trail Camera .1X Connector
Areas of applicaon
Camera Overview
2
3
2
compartment is housed in the right, rear part of the camera.
1
photos can be played back.
Steps to Use the Camera
Open and close the camera
securely locked.
4
4External Power Supply
3Insert memory card
turning on the camera.
5
INSTALL THE CAMEAR WITH A STRAP
to a tree or other object.
securing strap.
Using the camera
1
can be selected.
OFF:
SETUP:
ON:
6
3
. Mode:
1 photo, 2 photos, 3 photos
2
,
picture.
7
ON, OFF
of interference.
ON, OFF
Francais, Italiano, Nederlands, Portugues, Japanese, Chinese.
8
. Format memory card:
9
. Photo Stamp：
SHOT
SHOT
OK,<> :
MENU
OK” to
delete the selected recording.
MENU key under
OK to delete all
recordings.
.
4
10
zoom out photo, press MENU can return to original size.
5
11
Fasten the camera to a tree or similar object at a height of 1-2 meters and align the camera in
out the best alignment for the camera.
no LED display in this area.
sensors is 110°. And the recording angle of the camera is about 100 degree.
SETUP to ON
6
7
12
：
8
13
English
Table of contents
