2wIP D Installation Guide
Product Overview
1. Extend: RJ45 Female Connector (No LED indicator) converter allows 10/100 Base-T Ethernet and
PoE power to be transmitted using a CAT5 or better UTP cable with 4 pairs.
2. Link: This LED light indicates the cable connection status. The LED will shine after 10 seconds of
connection is unsuccessful.
3. Pwr:
4. Ethernet/PoE:
cables
5. Eth: This LED light indicates the communication status. Light Flashing: Successful
6. Power Jack:
7. PoE:
PoE power
Packing Checklist
The following itms are included:
Installation Step
IP Camera End:
1.
2.
Please refer to “Power Wattage VS. Cable Distance” table.
Switch Hub End:
1 1 7 2 3 4 5 62 3 4 5 6
