WARCRADLE STUDIOS Warcradle Scenics Funland Ferris Wheel User manual

Funland - Ferris Wheel - Assembly Guide
Parts may need careful removal from the MDF boards with a scalpel, and light sanding of any rough edges. We
recommend testing assembling sections before permanently gluing together.
NOTE: Repeat these steps for both sides of the Ferris Wheel

Funland - Ferris Wheel - Assembly Guide
Parts may need careful removal from the MDF boards with a scalpel, and light sanding of any rough edges. We
recommend testing assembling sections before permanently gluing together.
NOTE: Make sure the details and central
circle are facing outwards fro both sides.
Be careful lining up the pieces
NOTE: Repeat this step for both sides

Funland - Ferris Wheel - Assembly Guide
Parts may need careful removal from the MDF boards with a scalpel, and light sanding of any rough edges. We
recommend testing assembling sections before permanently gluing together.
NOTE: The following steps are for the
assembly of all six carriages.

Funland - Ferris Wheel - Assembly Guide
Parts may need careful removal from the MDF boards with a scalpel, and light sanding of any rough edges. We
recommend testing assembling sections before permanently gluing together.
NOTE: Only glue one screw in place on
one side of each carriage.
NOTE: Use the screw that's glued in place to line up the placement of the carriage,
then glue another screw into the other side of the carriage to fix it in place. Repeat
these two steps for all six carriages