Warner Electric MCS-836 User manual
Warner Photoscanner MC -836/836-1/836-2
Multi-Function Plug-In Timer Modules
MC -144, 149, 152, 159 Photoelectric Controls
Service & Installation Instructions
P-241-78
An Altra Industrial Motion Company
2Warner Electr c • 800-825-9050 P-241-78
pecifications
Mounting: Plug-in, mates directly with
connector on photoelectric
amplifier board.
Timing Controls: Potentiometers, adjustable
Weight: 1 oz.
Ambient Temperature: 0 - 125ºF. (-18 –– +52°C)
Light or Dark Operation: Selectable
Timing Ranges: MCS-836: 0.4 to 15 seconds
MCS-836-1: 1 to 30 seconds
MCS-836-2: 0.02 to 0.5 seconds
Minimum Input Pulse: 20 milliseconds for delay
pull, delay drop, and dual
delay. 50 microseconds for
one-shot and delayed
one-shot
Minimum Reset Time: 1 millisecond for all
functions
Electrical: Pin No. Function
+ +24 VDC Input
- Return (ground)
A Timer Input
B Timer Output
Part Numbers: MCS-836: 7400-448-024
MCS-836-1: 7400-448-029
MCS-836-2: 7400-448-030
Operations
The timer module is an optional plug-in device
which modifies the basic on-off photoelectric
control operation. These functions are necessary
for special timing applications. Dark-to-Light and
Light-to-Dark transitions may be used to trigger
any function, as selected.
Delay Pull: This function provides a delayed
response for pull-in (energize) of the output
device. The time delay is adjustable from 0.4 to
15 seconds.
2.520 MAX.
P1 P2
1.650
MAX.
.450
.300
POST INSERTION
.200 .015
+
-
1
2
3
4
5
6
BA+-
SWI
.156
1.600
1.912
COMPONENT SIDE
Decrease
Outline Diagram
.5625
MAX.
.093 MAX
.062 .008
.062 .015
+
-
+
-
MOUNTING POST
3
Warner Electr c • 800-825-9050 P-241-78
Delay Drop: Immediate pull-ln (energize) of the
output device and a time delay for drop-out
(de-energize).
Dual Delay: Independently set time delays for both
puIl-in (energize) and drop-out (de-energize) of the
output module.
One- hot: Provides a one-shot output. The output
device is energized by a transition of the input state,
and holds for a preset time independent of the
photoelectric input.
One- hot Drop: Reverse action of the one-shot
function, the output device is energized and drops
out on the input transition of the photoelectric
control.
Delayed One- hot: Time delay prior to a one-shot
output. Delay on one-shot timing is independently
adjustable.
Delayed One- hot Drop: Delay prior to a one-shot
drop similar to the one-shot drop but with a time
delay. Both delay and one-shot are independently
adjustable.
Installation
1. Select the desired timing functions.
2. Set appropriate switches to "ON" from table
below.
3. Place Light-Dark Selector Switch in the desired
position.
4. Insert timer module on pins in photoelectric
control, (NOTE: Power must be off.)
5. Adjust potentiometers for desired timing range.
Function
Normal Operation
Delay Pull
Delay Drop
Dual Delay
One-Shot
Delayed One-Shot
One-Shot Drop
Delayed One-Shot
Drop
Dark Operate Mode
witches “On”
Unplug Timer
Use umper
7420-702-001
5
3,5
None
1, 2, 5, 6
1, 2, 4, 6
1, 2, 3, 5, 6
1, 2, 3, 4, 6
Pin
elec-
tion
L/D
D
D
L*
D
D
D
D
D
Potentiometer(s)
Adjust
___
P-1
P-1
P-1 pull, P-2 drop
P-1
P-1 delay, P-2 O.S.
P-1
P-1 delay, P-2 O.S.
Light Operate Mode
witches “On”
Unplug Timer
Use umper
7420-702-001
5
3,5
None
1, 2, 5, 6
1, 2, 4, 6
1, 2, 3, 5, 6
1, 2, 3, 4, 6
Pin
elec-
tion
L/D
L
L
D*
L
L
L
L
L
Potentiometer(s)
Adjust
____
P-1
P-1
P-1 pull, P-2 drop
P-1
P-1 delay, P-2 O.S.
P-1
P-1 delay, P-2 O.S.
*NOTE: For proper operation of delay drop,
note that the light-dark switch must be reversed
for proper operation in the light & dark modes.
pecial Functions
Motion Detection 2,4 D P-2 2, 3, 4 L P-2
Retriggerable or
integrating one-shot
Operating Mode Dark Operate Mode Light Operate (Beam Complete)
Photoelectric
Input
Output Functions
Delay Pull
t1 = delay
Delay Drop
t2 = delay drop
Dual Delay
t1 = delay pull
t2 = delay drop
One-Shot
t3 = one-shot
Delayed One-Shot
t3 = one-shot
t4 = delay
One-Shot Drop
t5 = one-shot drop
Delayed One-Shot Drop
t5 = one-shot drop
t6 = delay
4Warner Electr c • 800-825-9050 P-241-78
Timing Function Waveforms
t1
(D)
t2
t1
t3
t3
t3
t4
t5
t5
t6
(L)
t1
Pull-In
Dark
Drop-Out
t2
t2
t1
t3
t3
t4
t5
t5
t6
Light
5
pecial Function
Motion Detector (Retriggerable or integrating one-shot):
This function provides a state change of the output device
when the input signal to the photoelectric control is changing
at a constant rate. When the input signal decreases in
frequency or stops completely, the output will reverse states.
Note: Time t7 must be longer than the light or dark transition
time of the photoelectric input.
The response of the output module to the photoelectric input
(beam complete or beam break) is dependent on the mode of
operation selected for the photoelectric amplifier.
Note: The timing potentiometers are not calibrated and the
minimum time may be less or the maximum time more than
the specified timing ranges.
(L)
(D)
t7 t7
Light
Dark
Pull-In
Drop Out
Photoelectric
Input
Output State
Warner Electr c • 800-825-9050 P-241-78
Warner Electric LLC
449 Gardner Street • South Belo t, IL 61080
815-389-3771 • Fax: 815-389-2582
www.warnerelectr c.com
An Altra Industrial Motion Company
P-241-78 11/07 Pr nted n USA
Warranty
Warner Electric LLC warrants that it will repair or replace (whichever it deems advisable) any
product manufactured and sold by it which proves to be defective in material or workmanship within a
period of one (1) year from the date of original purchase for consumer, commercial or industrial use.
This warranty extends only to the original purchaser and is not transferable or assignable without Warner
Electric LLC’s prior consent.
Warranty service can be obtained in the U.S.A. by returning any defective product, transportation charges
prepaid, to the appropriate Warner Electric LLC factory. Additional warranty information may be obtained
by writing the Customer Satisfaction Department, Warner Electric LLC, 449 Gardner Street, South Beloit,
Illinois 61080, or by calling 815-389-3771.
A purchase receipt or other proof of original purchase will be required before warranty service is
rendered. If found defective under the terms of this warranty, repair or replacement will be made, without
charge, together with a refund for transportation costs. If found not to be defective, you will be notified
and, with your consent, the item will be repaired or replaced and returned to you at your expense.
This warranty covers normal use and does not cover damage or defect which results from
alteration, accident, neglect, or improper installation, operation, or maintenance.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not
apply to you.
Warner Electric LLC’s obligation under this warranty is limited to the repair or replacement of the
defective product and in no event shall Warner Electric LLC be liable for consequential, indirect,
or incidental damages of any kind incurred by reason of the manufacture, sale or use of any defective
product. Warner Electric LLC neither assumes nor authorizes any other person to give any other warranty
or to assume any other obligation or liability on its behalf.
WITH RESPECT TO CONSUMER USE OF THE PRODUCT, ANY IMPLIED WARRANTIES WHICH THE
CONSUMER MAY HAVE ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL
CONSUMER PURCHASE. WITH RESPECT TO COMMERCIAL AND INDUSTRIAL
USES OF THE PRODUCT, THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES, WHETHER EXPRESSED OR IMPLIED BY OPERATION OF LAW OR
OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Changes in Dimensions and pecifications
All dimensions and specifications shown in Warner Electric catalogs are subject to change without notice.
Weights do not include weight of boxing for shipment. Certified prints will be furnished without charge on
request to Warner Electric.
This manual suits for next models
6
Table of contents
Other Warner Electric Scanner manuals
Popular Scanner manuals by other brands
Microtek
Microtek ScanMaker i2400 Supplement
microform
microform Janich & Klass DPU-X XINO S700 How-to
Allen-Bradley
Allen-Bradley DeviceNet 1784-PCIDS Configuration manual
Canon
Canon CanoScan FB 1200S Getting started
Epson
Epson ActionLaser 1500 Product specification
Fujitsu
Fujitsu 6240 - fi - Document Scanner Operator's guide
