7
3) Nut / Bridge
Nut:
Just A Nut III is the standard on RockBass®bass guitars since 2008, manufactured using high-tech material with the
best tonal characteristics, ne adjustability and stability.
Use the included 1.5 mm Allen wrench to
adjust the string’s height at the nut.
First loosen the locking screw (1) with the included 2.5 mm Allen wrench, the bridge is now unlocked and can be
adjusted with the adjustment screws (2). To adjust the height of each individual string saddle as well as adjusting the
string spacing, loosen the locking screws (3) with the included 1.5 mm Allen wrench and now the saddle is
unlocked. The saddle can now be moved sideways to the left or right to obtain the desired string spacing. In this
step you can also adjust the height of each individual string saddle, and for that take the 1.5 mm wrench and adjust
the adjustment screws (4). An ideal setup is the one where the strings follow the ngerboard’s radius.
You can adjust the intonation screws (5) with a screwdriver. Turning the screws clockwise will increase the string’s
length between bridge and nut; turning them counterclockwise will decrease the string’s length. Once the setup is
concluded please tighten locking screws 1 and 3 to secure it.
Press down on the string at the 3rd fret. Check the distance between the rst fret and the string.
It shouldn’t read more than 0.3 mm / 0.01”, which equals
the thickness of a business card.
1
3
2
5
4
Bridge:
The Warwick 3-D Bridge features additional adjustments on the top of the oating bridge: Intonation, string spacing
as well as individual string saddle height adjustment to accommodate the ngerboard’s radius.
