WaterUps Corro Wicking Bed User manual
Step-by-Step Assembly Guide for the WaterUps®Corro Wicking Bed 1 Published 4 February 2020
Step-by-Step Assembly Guide
for the WaterUps®Corro Wicking Bed
This guide is designed to assist you with the assembly of your new WaterUps®Corro wicking bed.
WaterUps®Installa�on Guide
www.waterups.com.au
Figure 1. Panel with hole for overow
pipe. the hole should be
posi�oned closest to the ground
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Step-by-Step Assembly Guide for the WaterUps®Corro Wicking Bed 2 Published 4 February 2020
– You will need to
purchase a 20L bag of perlite
to place in the wicks in your
WaterUps®bed. This will
ensure optimal long-term
wicking action
www.waterups.com.au
Figure 2.
Figure 3.
H�p://www.waterups.com.au/
product/waterups-reservoir-liners/
Figure 4.
QUICK TIP
QUICK TIP
Disclaimer:
The WaterUps®Website is owned and operated by WaterWix Pty Ltd – ABN 58 166 973 011 (WaterWix).
The information contained in this document is provided as is and without any warranties of any kind, whether expressed or implied. Users are advised to make
their own determination as to the suitability of this information in relation to their particular purpose or specific circumstances. No responsibility can be accepted
by WaterUps®, WaterWix or its staff for any loss resulting from any action taken or reliance made by you on any information contained in this document.
Copyright © 2020 WaterWix Pty Ltd. All rights reserved. WaterUps and the WaterUps Logo are registered trademarks of WaterWix Pty Ltd.
Popular Irrigation System manuals by other brands
Johnson Controls
Johnson Controls tyco ILLUSION manual
Tyco Fire Product
Tyco Fire Product SIN S2983 manual
Tyco
Tyco rapid response LFII Series quick start guide
Toro
Toro NO FOUND TMC-424E Quick reference guide
Redexim
Redexim Verti-Quake 2510 User manual and parts book
Viking
Viking MICROFAST VK329 Technical data