Waytronic WT-XS2 User manual

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
1
WT-XS2
Voice Prompter (Radar Induction)
1. Product introduction
Welcome to use Waytronic products. This product adopts radar detection and motion induction technology and
the detection distance is accurate to the centimeter level. When a person or object passes through the induction
area, it will immediately broadcast the voice. The appearance and operation is simple and convenient. You can
adjust the volume, set the timing, and change the voice through the WeChat applet. Built-in lithium battery, low
power consumption design, suitable for the application that require a very precisely detection, such as: parking lot
entrance and exit, toilet, warehouse height limitation, elevator counterweight alarm and other places.
2. Product features
➢PIR Infrared and radar detection and induction technology, strong anti-interference and stable performance.
➢Radar detection sensor, support set detect distance.
➢Built-in lithium battery, support charging management.
➢2W speaker, loud and strong sound.
➢Sound can be recording via Bluetooth and USB connected with computer.
➢The WeChat applet supports functions such as timing settings and power-saving mode activation.

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
2
3. Electrical parameters
Power Supply
DC5V 1A
Built in 1000MA lithium battery
Working Current
Sleep standby mode
≤30mA
Sleep standby mode
(Power saving mode)
≤45uA
Playing mode
≤325mA
Charging
≤900mA
Audio Format
MP3
Bit Rate: 16~320Kbps
Audio Output Power
8Ω/2W(typical value)
Volume
≥100dB
Induction Range
30-350±20CM
Working temperature
﹣20-33℃
Battery lasting time
In fully charged state, playing 50 times a day, 10 seconds long voice,
battery can last more than a month
4. Appearance introduction
LED indicator
PIR sensor
B button
A button
Speaker
Micro USB
On/off button
Bracket
Radar sensor

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
3
4.1 Button function
Button name
Operation
Function
A Button
Short press
Next audio（all loop）
Long press 3
seconds
Press and hold for 3 seconds to automatically start learning distance
when aiming at the learning target. At the same time, the red indicator
light flashes. If the learning is successful, it will play"Successful
learning", if learning unsuccessful, it will play "Learning failed"
Short press 3
times
Switch to single playing mode/all loop playing mode
B Button
Short press
Volume adjustment(7 levels)
Long press 3
seconds
Open Bluetooth to recording sound
A&B Button
Long press 3
seconds together
Delete the last voice file
5.Audio download
5.1 Change audio via USB
①Connect the computer via the micro USB data cable, and recognize the removable disk.
②Copy the prepared MP3 voice to the removable disk.
③Disconnect the data cable, short press the A button to listen the audio.
5.2 Upload audio via mobile phone Bluetooth
①Long press B button to open the Bluetooth and use the mobile phone to search for the connection, the
Bluetooth name is “WT-XS2”.
②Audio will record automatically when phone playing.
③After recording, press the "didi" twice and then exit audio record
6. Wechat app application
Download wechat app then scan the QR code

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
4
6.1 How to connect the Mini program
①Open the mobile phone's Bluetooth and mobile phone positioning, scan the upon QR code and connect.
②Click “Search for the device” , you will see "LE-XS2" connect and enter password"000000"
Step 1 Step 2 Step 3
6.2 How to choose the mode
"Infrared human body sensing trigger" is turned on for power saving mode, and turned off for radar mode (the
radar does not sleep, and the object keeps playing voice in the sensing range).
Valid when there is no timing setting
6.3 How to listen to the unit audio
(1) Music listening, click the button to play or pause the voice.
(2) Click the and button to select and listen the voice.
3) Slide the to adjust the sound level.
6.4 How to set timing setting
(1) Timing setting: Click "Timed Play" to enter the interface, On this interface, you can select the playing date,
music (including tracks/all loops, sound size), and start/end time.

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
5
①Select the “Custom”, it means the selected sound will play once during the set time period.
②Select "All Loop", it means the selected sound will play in sequence after each trigger.
(2) Save the settings: After the settings are completed, click "OK" in the upper right corner to automatically return
to the "Timing" interface, and click "Settings Synchronization" at the bottom of the "Timing" interface to complete
the settings.
Note: Timed playback supports up to 20 groups
Step 1 Step 2 Step 3 Step 4
(2) Save the settings: After the settings are completed, click "OK" in the upper right corner to automatically return
to the "Timing" interface, and click "Settings Synchronization" at the bottom of the "Timing" interface to complete
the settings.
(3) Save the settings in batches: Click the hidden button in the upper right corner of the timing interface and select
"Data Storage". After connecting to another product, click the "Get Archive" to call up the timing group, then click
"Set Synchronization".
Step 1 Step 2
(4) Batch delete timing setting: Click "Batch Delete" in the hide button to delete the timing group.

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
6
6.5 Change Bluetooth name and password
Click on the "Mine" page to enter "Parameter Settings", enter "Bluetooth Name" and modify the login password.
Note: After the setting is completed, turn off the Bluetooth to enter the set working mode.
7. Installation
7.1 Bracket assembly

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
7
7.2 Installation Precautions
(1) Radar detect angle is 0.3-3.5 meters length and 1.2 meters width. If the distance is exceeded, the sensing will
not be set and the voice will be triggered, as shown in the figure below.
(2) How to wake up ultrasound to working: when people passes through the sensing area (as shown in the figure
below), the voice is triggered when entering the set distance of the radar (the infrared sensing angle is 120°, and
it is effective when passing through from the left and right sides. Wake up ultrasound to enter working mode).
(3) There should be no other similar products around the product, such as reversing radar, to avoid false trigger.

Shenzhen Waytronic Electronics Co., Ltd Model number :WT-XS2
8
8.FAQ
9. Accessories
Disclaimer
Shenzhen Waytronic Electronics Co., Ltd. reserves the right to modify the use of materials without notifying
customers. The new product specifications will be subject to the latest version of the usage data.
Problem
Solution
No reaction when turn on, sound
intermittent sound
Please confirm whether the battery is in a low power state, please
charge or replace the battery in time
Sensing distance is too short
1. Please confirm whether it is in power saving mode.
2.Please confirm whether it is installed in accordance with the
requirements of the installation.
Misplay
1.Are there obstacles in the sensing area of the product?
2.Whether there are interference sources around the product (like
radar products).
The applet cannot search for
Bluetooth
1. Please make sure that the mobile phone turns on Bluetooth,
positioning and network.
2. Press the key to wake up the Bluetooth.
3.Exit the applet and reopen it and click search.
Name
Quantity
Host
1 pcs
Bracket
1 set
5V 1A USB adapter
1 pcs
USB cable
1 pcs
User manual
1 pcs
Contact Us
Shenzhen Waytronic Electronics Co., Ltd.
Tel: [phone]
Fax : [phone]
Website: https://www.waytronicmfg.com/
E-mail: [email protected]
Add:4/F,Building No.11,Fuan Robotics Industrial Park, Fuyong,Baoan
District,Shenzhen ,518103,Guangdong ,China