Webee Smartee SM2000 User manual

Smartee SM2000
GETTING STARTED WITH SMARTEE
1
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
GETTING STARTED WITH SMARTEE
This document is the property of Webee L.L.C. The data contained here, in whole or in part, may not be duplicated, used or
disclosed outside the recipient for any purpose. This restriction does not limit the recipient's right to use information contained
in the data if it is obtained from another source without restriction.

Smartee SM2000
GETTING STARTED WITH SMARTEE
2
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
INDEX
Chapter 1: Installing your Smartee
Using a TV......................................................................03
Without using a TV.........................................................04
Set up your space using your mobile app.........................05
Set up your space using your Web app............................06
Chapter 2: Setting up your space
Chapter 3: Getting to know your Smartee
Top & Bottom Menu..........................................................07
Settings Menu..................................................................08
Chapter 4: Adding devices
Previous considerations .....................................................09
Add Devices using Webee TV app......................................10
Add Devices using Webee mobile app...............................11
Add Devices using Webee Web app..................................13
Chapter 5: Webee functionalities
Webee Functionalities... .....................................................14

Smartee SM2000
GETTING STARTED WITH SMARTEE
3
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
INSTALLING YOUR SMARTEE
1
1
Smartee comes
with a cool Air
Mouse but any
regular mouse will
work as well just
by plugging it to
the USB port.
Use the power source to plug the Smartee into the electrical outlet, and connect it
to the TV using the HDMI cable.
Insert the USB dongle into the hub. If the led on the mouse is blinking red and
blue, use the USB cable to charge it directly from the hub.
FOLLOW SMARTEE WIZARD TO CONNECT TO INTERNET AND COMPLETE
THE SET UP
Follow the instructions on the screen to connect the hub to internet using WiFi or
Ethernet, and follow the steps to create your account. Once the setup is
completed, navigate the device console to start adding them to the system.
PLUG THE WEBEE HUB
CONNECT THE AIR MOUSE
CONNECTING TO YOUR TV
Your Smartee can be setup in different ways according to your preferences. Find below the
instructions to set it up either using your TV, directly on your mobile App or using a web
application.

Smartee SM2000
GETTING STARTED WITH SMARTEE
4
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
Connect the hub to Internet using
an Ethernet cable.
Download the Webee app from
the App Store or Play Store on a
mobile device and follow the
instructions.
DOWNLOAD THE WEBEE APP TO CONTROL YOUR SMART HOME
SYSTEM FROM ANYWHERE
4
Mobile App
Download it from the App Store or
Google Play.
Access my.webeelife.com from your
browser and control your home using
your computer.
Web App
WITHOUT USING A TV
Ethernet

Smartee SM2000
GETTING STARTED WITH SMARTEE
5
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
2- Create your Space. Spaces allow you to
group and control your devices with your
Webee app.
3- Name and configure your Space
settings.
3- Add your Smartee to your Space.
4- Enter your Smartee MAC address. Find
it on a sticker at the back of your hub.
Make sure to use all capital letters and no
spaces or colons.
4- On the bottom menu, navigate to the
Devices section to start adding devices.
Learn more on page 13.
1- On your browser type my.webeelife.com
Register (Sign up) to create an account or
sign in.
SET UP YOUR SPACE USING THE WEB APP

Smartee SM2000
GETTING STARTED WITH SMARTEE
6
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
SETTING UP SPACES
2
2- Create your Space. Spaces
allow you to group and control
your devices with your Webee
app.
3- Name your Space and
select your type of
building.
3- Add your Smartee to
your Space.
4- Enter your Smartee MAC
address. Find it on a sticker in
the back of your hub.
4- Access your Space and
start adding devices.
Learn more on page 11.
1- Download the Webee app
from the App Store or Play
Store. Register and Log-in to
your Webee account.
Spaces are a way to group your devices and control them with your Smartee through
your Webee app. You can create a Space when setting up your Smartee on the TV.
Or check the following instructions to do it using your mobile or web app.
SET UP YOUR SPACE USING THE MOBILE APP

Smartee SM2000
GETTING STARTED WITH SMARTEE
7
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
GETTING TO KNOW YOUR SMARTEE
3
Access to configure your
Home Monitoring settings.
Access to control your smart
devices.
Access to check extended
one week weather.
Top menu
Bottom menu
Access to Energy and
Environment reports.
Access to Settings.
Learn more on page 8.
Access all multimedia
functionalities.
Access to all applications.

Smartee SM2000
GETTING STARTED WITH SMARTEE
8
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
Settings menu
Butlers: Automate your
devices to run on their own.
My Smartee: Check your
Smartee status such as current
version and connection.
Accounts: Direct access to
your device’s accounts.
System: Smartee general
configuration.
Others: Smartee advance
configuration.
Developers: Access to
Z-Wave and Zigbee consoles.
GETTING TO KNOW YOUR SMARTEE

Smartee SM2000
GETTING STARTED WITH SMARTEE
9
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
You can add and control devices from your TV, your mobile app or Web app.
To add a device to Smartee follow this intructions:
ADDING DEVICES
4
On this chapter learn how to add devices using your different Webee apps.
Webee Hub Smartee SM2000 communicates with smart devices using different
communication protocols such as ZigBee, WiFi. Verify device compatibility by visiting
our support section at webeelife.com/support.
Note: If the device has already joined a different network, follow the manufacturer
guideline to reset it to join Smartee network.
1- Move the device closer to the hub for the
pairing process.
2- Prepare the device to join the network
(pairing mode). See instructions on each
device user manual.
3- Press the Search & Add devices button on
the Smartee Webee app to open the network.
4- Smartee will automatically find and add the
devices around.
PREVIOUS CONSIDERATIONS

Smartee SM2000
GETTING STARTED WITH SMARTEE
10
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
1- On your Welcome screen, select Devices
on the bottom menu.
3- Tap to Add Devices. Smartee will search
and add the devices around.
4- Once the devices is added, tap on it to
edit and control it.
5- Rename your devices and send different
commands to perform. . You can automate
devices to run on their own by creating
Scenes and Butlers. Learn how, accessing
the tutorials on our support section
webeelife.com/support.
ADD DEVICES USING WEBEE TV APP

Smartee SM2000
GETTING STARTED WITH SMARTEE
11
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
1- On your mobile app
navigate to the device section
on the left menu.
2- Tap to add devices. Smartee
will search and automatically
add the devices around.
3- Tap on the device to edit
and control it.
4- On the device screen, tap on
the small pencil to edit.
5- Tap on Customize your
device.
6- Choose your device type,
rename it and add a picture to
easily identify it.
ADD DEVICES USING WEBEE MOBILE APP
*You can mark any device as favorite by tapping on the star on the top right corner, and access all of your selected
devices navigating to the favorite section on the main menu

Smartee SM2000
GETTING STARTED WITH SMARTEE
12
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
7- You can group your devices by
Functions and Rooms.
8- Tap on Rooms to assign your device to
a room. You can access all the devices
grouped in each room by navigating to
the Room section on the main menu.
9- Tap on Functions to assign your device
to a Function. You can access all the
devices grouped on each function by
navigating to the Function section on the
main menu.
10- Control the device manually or
automate your devices to run on their own
by creating Scenes and Butlers. Learn
how to use this features by accessing the
tutorials on the support section
webeelife.com/support.
ADD DEVICES USING WEBEE MOBILE APP

Smartee SM2000
GETTING STARTED WITH SMARTEE
13
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
1- Access your Space and Navigate to the
devices section, Click to add devices.
2- Navigate to the Device section.
3- Tap to Add Devices. Smartee will search
and add the devices around.
4- Once the devices is added, tap on it to
edit and control it.
5- Rename your devices and send commands for the device to perform. You can automate
your devices to run on their own by creating Scenes and Butlers. Learn how accessing the
tutorials on our support section webeelife.com/support.
ADD DEVICES USING WEBEE WEB APP

Smartee SM2000
GETTING STARTED WITH SMARTEE
14
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
Webee app functionalities
5
Classify devices according to their function using tags like climate,
security, and others.
Group and organize devices in different rooms and grant different
accesses to each user.
Schedule devices to execute actions automatically at the same time.
For example, create "Away Scene" to lock doors and turn off main lights
when you leave for work.
Configure devices to trigger actions when an specific activity is
detected, such as turning on lights during turn on lights during night
time if motion is detected inside home.
Butlers
Scenes
Rooms
Functions
Access webeelife.com/tutorials to learn how to configure these functionalities on your
Webee app.

Smartee SM2000
GETTING STARTED WITH SMARTEE
15
Page
© 2016 Webee LLC. All rights reserved. Webee and the Webee logo are trademarks or registered trademarks of Webee LLC
V1.0 REV. May, 2016