WebWay Nano WiFi User manual

WebWay Nano WiFi
!
Quick start guide - Smart / Nano
This is a quick start guide with steps of how to commission a WebWay Nano with WiFi module in box. For
engineers guide, full instructions and panel guides please visit www.webwayworld.com/support. This
commissioning process is for devices which have been configured on WebWay World. To configure a device
please go to www.webwayworld.com log on and click on Configure.
Once you have connected WiFi module to the customers WiFi network and the WebWay is fully
commissioned you can test signals with your ARC. To see a live view of the alarm log, go to Connections on
WebWay World.
If you have any problems, please contact technical support.
Commissioning
Configurations
Smart WiFi/3G
Nano WiFi
Nano WiFi Guide
webwayworld.com/support
Tech Support [phone]
Dec 2017
Please see reverse for wiring
For WiFi only, ignore step 1, 6 & 7
WPC5284(
-"
+" A" B" C" D"
Tamper
Bi – Colour
LED
TRI – Colour
LED
Console
1" 2" 3" 4"

WebWay Nano WiFi
LED Colours
Wiring instructions
This installation must be cabled in CAT 5e and the 12V Power (+) cores must be Doubled-up in the Solid
Coloured cores and the dual colour core (mate) must be used as the 0V Neg. Single core pairs can be
used for RS422 Data, between the SPT and the remote WiFi Module.
WiFi Module Dip Switch
Dip 1
ON
Dip 2
ON
Dip 3
OFF
SPT
Terminals
Cable Colour
WiFi Module
Terminals
PWR +
Blue & Orange
+
PWR -
Blue / White
&
Orange / White
-
A
Green / White
A
B
Green
B
C
Brown / White
C
D
Brown
D
Bi Colour LED
Colour
Mode
Meaning
Red
Slow Flash
No Access Point Found
Red
Solid
Poor Signal (signal unreliable)
Amber
Solid
Normal Signal
Green
Solid
Good Signal
Red /
Green
Alternating
Blinking
Lost Communication with the
SPT
Red
Fast Flash
Power Problems
Tri Colour LED
Colour
Mode
Meaning
Blue
Solid
No Access Point found
Red
Slow Flash
Not connected to any Access Point
Blue
Slow Flash
Module in Access Point mode ( for configuration)
White
Blink
Module is in WPS mode, looking for Access Point
Red
Solid
Connected to Access Point - No Communications
Amber
Solid
Connected, Commissioned - Communications LOST
Green
Solid +
(occational Blue
Twinkle)
Connected, Commissioned - Communications GOOD
Green
Red Flash
Message transmitted to MCT
Green
Blue flash
Message received from MCT
Green
Magenta
Flash
Message in both directions to MCT
Red
Alternating
Blinking
Lost Communication with the SPT
OFF
Off
WiFi Module is powered off
Nano WiFi Guide
webwayworld.com/support
Tech Support [phone]
Dec 2017
WPC5284(
-"
+" A" B" C" D"
Tamper
Bi – Colour
LED
TRI – Colour
LED
Console
1" 2" 3" 4"