Weis Design Wise Control User manual

4. What happens if the battery is nearly empty?
Under normal use (1hour/day) the battery will last for 1 year. A few hours
before the controller turns off a red light will start to flash slowly.
Replace the batteries with new AAA size Alkaline or fully charged NiMH
rechargeable batteries.
5. How can I used the advanced Button functions?
The advanced functions can be selected by pressing two buttons at the
same time. Press first the right click button then select for example the
Volume(+) button.
6. Can I use the controller with any mini-receiver?
No, the mini-receiver has been matched to your controller to keep you
secure and avoid interference. Matching your controller to a different
mini-receiver is possible. Visit www.weistech.com.tw to download the
software.
7. Can I turn off the controller?
Yes, press the On/Off button for 3 second.
1. I plugged in the mini-receiver but nothing happens?
Check that the light on the mini-receiver turns on:
No light means your USB port is not working, try another USB port
Red light means the mini-receiver is ready but can not see the controller
press the On/Off button for 3 second on the controller until you see the
green LED turn on.
Green light means the receiver has connected with the controller and
you can start using your controller.
2. I did not find any CD to install the software?
The controller is designed for plug-and-play all the software is included
with your operating system. You don’t need any additional software.
3. If I forget to turn the controller off, will it turn off automatically?
Yes, the controller turns off, if not used after 45 minutes, if the mini-receiver
is unplugged the controller turns off after 3 minutes.
Frequently Asked Questions:
Plug the receiver and turn on the power by pressing the On/Off
button for 3 second, untils the Light turns green
Notes:The Receiver is very small and can remain plugged into your
computer. If you decide to remove the Receiver, store it inside the
Battery compartment.
Find the receiver attached to the
battery cover, remove it and close the
battery cover.
Slide battery cover open. Insert
batteries, ensure correct polarity
1. Install the batteries 3.Connect the receiver
2.Install the receiver
System Requirements:
Windows 98, Windows XP, Windows Vista, Windows 7, Mac OS, USB 1.1 or higher
Experience a new way to use a mouse!
。Take full control of your presentation anywhere in the room!
。Unleash your presentation skills and excel in your professional life!
Multifunctional wireless controller
User Guide
。Easy to use for anybody in your home!
。Watch Movies, Listen Music, Play Games, anywhere, anytime!
*Only support basic function/single button opertaion for MAC ( advanced
functions are unavailable).
Presenter Mouse:
Wireless Link Advanced 2.4GHz wireless technology
Batteries 2 x AAA Alkaline Batteries or NiMH Rechargeable Batteries
Laser Red Laser 650nm, power < 1mWatt
Receiver:
Wireless Link Advanced 2.4GHz wireless technology
Interface USB1.1 or higher
Product Specications:
Brand: Weis Design
Model: PC-001
Equipment Name: Wise Control - Presenter Mouse

Laser safety warning:
Avoid direct eye contact with the laser. Do not
point the laser at mirrors or reective surfaces.
Keep the product away from children. Do not
use equipment such as microscope or telescope
to see the laser light. Do not open the product
to avoid direct exposure to the laser light.
LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
Multifunctional wireless controller
User Guide
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the
limits for Class B Digital Device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient of relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.