
Sope of delivery:
1 x tabletop, 1 x table column with folding table adapter,
1 x tripod table leg, 1 x screw set for HPL tabletop (4 x M5 x 20 fillister head
screw, 1 x Allen ey 3 mm), 1 x screw set for tea tabletop (4 x M6 x 25 fillister
head screw, 1 x Allen ey 4 mm), 4 x washer for fillister head screws, 1 x M8
tubular soc et wrench, 2 x M8 hex screw, 2 x washer
Assembly:
Place the table top on a flat, level surface with the bore holes facing upward.
The scope of delivery includes 2 different sets of screws. Please ensure you use
the correct screws for the material of your tabletop! Now attach the table column
with the folding table adapter to the tabletop using the 4 fillister head screws
and washers.
At first, only lightly tighten the screws. Finally, tighten them firmly, wor ing
diagonally.
Now screw the tripod table leg to the tabletop in the position shown, using the
two hex screws and washers.
The stability of the table can be finely adjusted with the help of the adjusting
screws.
ASSEMBLY INSTRUCTIONS
T R I O B I S T R O - A N D B A R T A B L E
Tripod table leg
Folding table
release lever