AFTER SALES SUPPORT
866-694-5085
USA
7
1. To open the transport chair, tilt to
one side and push down on seat
rails (gure 1).
2. Lift back support to upright
position. The lock to secure the
back will engage automatically.
(gure 2). To fold down and store,
pull up on handles simultaneously,
and carefully fold down the back
support.
3. To attach footrests, align the holes
on the footrest arm with the pegs
on the frame of the transport chair,
and swing footrest inward until
locks engage (gure 3).
4. To adjust the length of the footrests,
loosen the bolt on the telescoping
tube shaft, adjust the footrest to the
appropriate length, and tighten the
bolt securely after adjustment
(gure 4).
6. To remove the swing away footrests,
release the lock, swing outward and
rearward, and lift up and off to
remove.
5. The safety belt is already attached
for use and should not be removed
from the transport chair.
Transport Chair Assembly
Assembly
Figure 1
Figure 2
Figure 3
Figure 4
