welland KP660L User manual

Electronic Kitchen scale
Instruction Manual
Please read the instruction carefully before operating.
Product Specification
Power 3X1.5V AAA batteries
Display
LCD readout display
Max Capacity
5KG
Division 1g
Product Feature
* Equipped with four precision strain gauge sensors system
* Press on/Auto off/Press off
* Tare function
* With temperature display function
* With countdown function
* Unit:g/lb:oz/ml/fl,oz
* Default unit: g
* Low battery/over-load indication
Product Structure
LCD Display Function
LCD readout Display
Power button/Tare button
Unit button/Hold button

Tare weight
T
Time display
Negative value
ml
Volume unit
Battery power
Weight unit
lb:oz
Weight unit
fl.oz
Volume unit
To Insert or Replace Battery
1, On the base of the scale, gently remove the battery cover as per the arrow direction.
2, Insert 3XAAA batteries into the compartment observing the polarity markings in the base.
3, After inserting the batteries, replace the battery cover and push the cover backward.
Kind Notice:
Please be aware that the incorrect polarity will cause the permanent impact on the electronic parts.
Button Functions
Press on/Press off/Zero/Tare
Unit Conversion: g / ml

Setting Time
Operation
Before use, place the scale on a solid, level surface. Place any container or bowl (if used) on the scale
before operation.
Gently press the button to turn on the scale.
The scale LCD display will show its start routine of segment as it powers on.
Wait until the “0” is shown on the display.
Place the item to be weighed on the scale (or in the bowl if required). The LCD
will show the weight reading.
After weighing press the button for three seconds to change the scale
mode to time display mode; Or leave the scale and it will automatically change
to time display mode in 2 minutes.

Unit Conversion:
While the scale is on, select the required unit by touching the button, unit including
g/lb:oz/ml/fl,oz;
There are three weight mode for the units: Weight mode, water volume mode, Milk volume mode;
You can keep press the button for 3 seconds to change the weight mode you need;
Tare function
The tare Function allows you to weigh another item consecutively after weighing the first item
without removing it from the scale.
Gently touch the button to turn on the scale.
The scale LCD display will show its routine of segment as it powers on.
Wait until the “o” is shown on the display. Put the container on the scale platform.
The LCD display will show the steady weight of the container.

Touch the button to clear the weight of the conainer(reset to zero)
The lower-left corner will show icon , it means the Tare function is activated.
Add the ingredients into the container.
The LCD will show the weight of the ingredients only.
Repeat touching the button to weight new different ingredients.
Negative Value
The display will show a negative value (see LCD functions) if a weight has been removed from the
scale. Please press the button to clear the negative value, the display will show “0” again.
Temperature Display function
When the scale is on off status, the LCD will show the time and temperature;
After turn on the scale, the scale also will show the indoor temperature;

Time display function
When the scale is on off status, the LCD will show the time and temperature;
If you need to adjust the time setting, Keep pressing the button, you can select 12hr time
mode or 24hr time mode according to button;
After confirming the time mode, the time of Hour will flashing, you can adjust the correct time
according to buttons; Press to confirm the Hour display, then the second will
flashing, you can adjust the correct time according to buttons, and press to
confirm the time display; And then finish the time setting;
Countdown function
This scale have countdown function, operation as following:
1. Turn on the scale, the LCD will show as following:
2. Keep pressing Unit button,the time of minute and the alarm icon will be at flashing status, then
you can adjust the digital number according to pressing button, then press
button to confirm the minute number; At the same time, the time of second and the alarm

icon will be at flashing status, you can adjust the digital number according to pressing
button, then press button to confirm, and start the countdown function;
Mark: when in setting countdown time status, you will only have 30 seconds to set the time, after 30
seconds, the scale will exist the setting status;
3. After the countdown reach 00:00, the scale will have the voice alarm for you;
You can press any button to stop the alarm voice;
4. Countdown arrange: 00:00-99:59;
Error Indication
The “Lo” symbol on the display indicates that the battery power is running low. Please
replace new battery;
The “Err” symbol on the display indicates that the scale is over-loaded. Please step off
to avoid possible damage to the product.
The “un5f”symbol on the display indicates that the scale is not stable for weighing.
Please follow operation instructions for usage.
Care and Maintenance of the Scale
* Place the scale on a solid level surface before use.
* Avoid hitting or dropping the scale otherwise damage may occur.
* Do not overload the scale or put heavy things on the scale when not use.
* Treat the scale with care as it is a highly precise electronic instrument.
* Do not immerse this product in water or any other liquid. Please keep dry surface.
* Clean the scale with a soft damp cloth, do not use chemicals or harsh abrasives.
Battery Advice
* If the scale is not to be used for long periods, it’s recommended to remove the battery to avoid
damage to the scale due to possible battery leakage.
* Keep the battery our of each of children.
* Do not mix old and new batteries, with different compositions or of different brands in order to
prevent possible leakage, explosion.
* Do not heat or deform the batteries or explore to fire.
* Waste batteries should not disposed of with household waste.

* Please check with your local authority for battery recycling advice.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local Authority or retailer for recycling advice.