welland NetShare GX ME-752GNS User manual

Page 1
Quick Install Guide
1. Getting Started
Kit Contents
●NAS Enclosure
●Ethernet cable
●eSATA cable
●USB cable
●Power Adapter
●Installation CD
●QIG
Minimum System Requirements
●Windows 2000/XP/VISTA/7
● Linux/UNIX
●MAC OS 9.x or above
2. Start to Assemble & Configure
①Install SATA hard disk into NAS enclosure
Pull down the “Open” switch and follow the below steps to install SATA hard disk into the enclosure.
②CableconnectionandpoweronNASenclosure
③Install J2SE program for executing the NAS Tracker
Insert the CD into your PC and find “J2SE Runtime Environment.
Please double click it to setup, and setup wizard will lead you to install
this application program.
Quick Install Guide
SATA to 10/100Mbps LAN/USB2.0 Host, NAS Disk
④Executing the NAS Tracker to find out the NAS device
“NAS Tracker” could help you to search the NAS device over the
network directly. After install the J2SE, you can copy “NAS Tracker.jar”
from install CD to
y
our PC, double check it to execute the tracker function.
①Power Switch
②DC Connector
③eSATA Connector
④USB2.0 Device Connector
⑤LAN RJ45 Connector
⑥Printer Port
⑦Reset Button
⑧HDD Ejection Stick
⑨Power LED Indicator
⑩Access LED Indicator
⑪Open Switch
⑫Heat Dissipation Vents
․Please make sure your internet connection is working.
․Please connect LAN cable to the LAN port of the
ME-752GN-S and put the other end to the LAN port of
switch/hub/router which is internet connected.
․Connect the power cable, and power on the NetShare GX.
․If using LAN mode, please do not connect USB or eSATA
cable simultaneously.
Note : Above program is Windows base utility.
Note : Instead of accessing NAS by above NAS Tracker program, there is another way to access NAS by filling in default IP address of
NAS “169.254.0.1” in your web browser. When following this way, you have to set the IP of your computer to be at the same
domain such like 169.254.0.XXX

Page 2
Quick Install Guide
SATA to 10/100/1000Mbps/USB2.0/eSATA, NAS Disk
⑥Format hard disk
3. Start to use NAS functions
①Check if the hard drive is available
If the hard disk is formatted completely, you will see the hard disk information from the “Disk Information” under “Status” icon. And you can start to use
the NAS functions.
②Change password of administrator
Click Status item, and click the Change to modify the administrator’s password. Please remember new password if it is set.
③Start Browser: NetShare manager
All procedures are completed now!! You can enter new password to manage your own NAS!
⑤User Name & Password
The system will request the user name and password for user
login.
Default value of user name: admin & password: admin, and click OK
to access NAS Service Manager
NetShare GX requests FAT32 as the recognized file system for LAN mode,
the file system of the drive needs to be formatted when using it in NetShare
enclosure at the first time.

Page 3
4. Remarks
1. The full NAS operation manual can be found in the "User Manual" of the CD.
2. The product is compliant with CE/FCC/UL/RoHS/WEEE.