Wellis WB00370 Manual

EN
DE
FR
HU
RO
Coyote
WB00370
Coyote sink cabinet
INSTRUCTION GUIDE
Coyote Spülenschrank
BEDIENUNGSANLEITUNG
Armoire á vaisselle Coyote
GUIDE D’UTILISATION
Coyote mosogatószekrény
HASZNÁLATI ÚTMUTATÓ
Dulap chiuvetă Coyote
GHID DE INSTRUCȚIUNI

EN
IMPORTANT:
Save for electrical inspector’s use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference
EN Coyote sink cabinet
INSTRUCTION GUIDE

Welcome
Thank you for purchasing your Coyote sink cabinet Appliance!
We appreciate your business and we recommend that you read this entire
User’s Manual before operating your new appliance for the rst time.
This manual contains instructions on how to properly install and set up your
new range, as well as insights into the unique features that our product offers.
Please keep this manual for future reference, as it contains answers to ques-
tions that you might have as you begin to cook.
Thank you
This manual applies to the following models’ series:
Model #WB00370 (Coyote sink cabinet)

EN Parts Explosive Picture
Kitchen Sink Cabinet
Parts list and Explosive
Picture

Parts List
Explosive Part Name Quantity
1 Countertop welding assembly 1
2 Water sink 1
2.1 Drainpipe with anti-overow 1
3 Left side panel welding assembly 1
4 Decoration panel welding assembly 1
5 Condiment holder welding assembly 1
6 Bottle opener 1
7 Beam welding assembly 1
8 Left door welding assembly 1
9 Right door welding assembly 1
10 Door hinge 4
11 Supporting leg 2
12 Fixed caster 2
13 Universal caster with brake 2
14 Bottom panel welding assembly 1
15 Door barrier strip 1
16 Gasket 2
17 Right side panel welding assembly 1
18 Back panel welding assembly A 1
19 Back panel welding assembly B 1
20 Faucet 1
20.1 Faucet inlet pipe 2
21 ¼” Philips thumb head screw with anti-slip design 52
22 Philips thumb head screw 4
23 at head screw 26
24 cabinet back connecting plate 2
25 cabinet front connecting plate 1

EN Product Dimension

Cabinet Installation
Step 1
1. Connect 2 pcs supporting leg (Part # 11) to bottom welding part, and tight-
en two legs;
2. Connect 2 pcs Fixed caster (Part # 12) and 2 pcs universal caster with
brake (Part # 13) with 16 pcs ¼” Philips thumb head screw with anti-slip
design (Part # 21) to bottom welding part (Part # 14)

EN Step 2
1. Reverse back Bottom panel welding assembly (Part # 14). Install
2 pcs Gasket (Part # 16) to Part # 14, and then use 2 pcs Philips
thumb head screw (Part # 22) to install Door barrier strip (Part #
15) to Part # 14;
2. Use 3 pcs ¼” Philips thumb head screw with anti-slip design (Part
# 21) to tighten Left side panel welding assembly (Part # 3) to Part
# 14;
3. Use 3 pcs Part # 21 to tighten Right side panel welding assembly
(Part # 17) to Part #14;
4. Use 13 pcs Part # 21 to tighten Back panel welding assembly A
(Part # 18) and Back panel welding assembly B (Part # 19) with
Part #13, #3 and #17.
5. Do not over-tighten all the screws until parts are lined up.

Step 3
1. Use 4 pcs Part # 21 to connect Beam welding assembly (Part # 7) with
Part #3 and #17;
2. Use 4 Part # 21 to connect Decoration panel welding assembly (Part # 4)
with Part #3 and #17;
3. Do not over-tighten all the screws until parts are lined up

EN Step 4
1. Use 2 pcs Part # 21 to connect Condiment holder welding assem-
bly (Part # 5) with Part #4;
2. Use 2 pcs Philips thumb head screw (Part # 22) to connect bottle
opener (Part # 6) with Part #4;
3. Use 24 pcs at head screw (Part # 23, Showing in Picture “B”) to
install 4 pcs Door hinge with Part # 3, Left door welding assembly
(Part # 8), Right door welding assembly (Part # 9) and Right-side
panel welding assembly (Part # 17).
4. Install Part # 8 to Part # 3 and install Part # 9 to Part # 17. Do not
over-tighten all the screws until parts are lined up

Step 5
1. Use 4 pcs Part # 21 to install Countertop welding assembly with Part # 3
and # 17, making sure the connection is smooth

EN Step 6
The Product without faucet and water pipe will be looking like below
picture

Step 7
1. Install Faucet (Part # 20) to Water sink (Part # 2), then put 2 pcs water
inlet pipe (part of # 18) into the bottom of Part # 20;
2. Put Drain pipe with anti-overow (Part # 2.1) to the bottom of Part # 2,
then use specialized screw 3/16” screw within Part # 2.1 to lock Antiover-
ow connector (already installed from the manufacturer), connect anti-ow
connector to the side of drain pipe;
3. Take out 3M double sided tape from the edge of the water sink
Already installed from
manufacturer
3M double sided tape
Anti-ow connector
need to be
connected

EN
4. For detailed installation information of faucet, see below picture.
Drain Pipe
Water Inlet Pipe
Anti-ow
connector

Step 8
1. Put Part # 2 on top of Part # 1 and make sure the connection is tight

EN
You Coyote sink cabinet Outdoor Cabinet could be connected with any other Coyote Outdoor Cabinet models. If you are having a Corner Cabinet and you would like to connect it to another cabinet, use corner cabinet connecting plate with 2 pcs 1/4" screws (Part # 06.02.00093-000-AO) to connect both cabinets; If you are having a Sink Cabinet, Appliance Cabinet or Pizza oven Cabinet, use cabinet connecting plate with 2 pcs 1/4" screws to connect both cabinets.
Cabinet front connecting Plate Corner Cabinet Front connecting plate

You Coyote sink cabinet Outdoor Cabinet could be connected with any other Coyote Outdoor Cabinet models. For Back Panel Connections, use Back Cabinet connecting plate with 2 pcs 1/4" screws (Part # 06.02.00093-000-AO) to connect both Cabinets.
Back Cabinet Connecting Plate

DE
WICHTIG:
Für die Verwendung durch den Elektroprüfer aufbewahren.
Installateur: Montageanleitung beim Hausbesitzer lassen.
Hausbesitzer: Montageanleitung für spätere Verwendung aufbewahren
DE Coyote Spülenschrank
BEDIENUNGSANLEITUNG

Willkommen
Vielen Dank, dass Sie Ihr Coyote Spülenschrank Gerät gekauft haben! Wir
freuen uns über Ihr Interesse und empfehlen Ihnen, diese Bedienungsanlei-
tung vor der ersten Inbetriebnahme Ihres neuen Geräts vollständig zu lesen.
Dieses Handbuch enthält Anweisungen zur ordnungsgemäßen Installation und
Einrichtung Ihres neuen Produkts sowie Einblicke in die einzigartigen Funk-
tionen, die unser Produkt bietet. Bitte bewahren Sie dieses Handbuch zum
späteren Nachschlagen auf, da es Antworten auf Fragen enthält, die Sie zu
Beginn des Kochvorgangs haben könnten.
Vielen Dank
Dieses Handbuch gilt für die folgenden Modellreihen:
Modell #WB00370 (Coyote Spülenschrank)

DE Teile-Explosionszeichnung
Schrank für Küchenspüle
Teileliste und Explosions-
zeichnung