Wesena e6V User manual

Operator’s manual
e6v
Make life colorful

Thank you for purchasing WESENA’s HTPC Chassis. We
recommend that you read this user guide thoroughly before
installation.
WESENA is the professional global supplier of HTPC cases, we
hold the professional product designing, the novel and
fashionable outside looking , humanistic inner structure of
it ,high-quality QC management and high-quality production
team. At the same time we are on the line of providing the high
quality products constantly , and will never stop innovating and
improving the theory of development in HTPC case . The
products, Both OEM and ODM are welcomed.
More information of our products visit http://www.wesena.com
Any other question please make call 400 6088 126
WESENA is not responsible for any damages due
to external causes, including but not limited to,
improper use, problems with electrical power,
accident, neglect, alteration, repair, improper
installation or improper testing.

Index
e6v overview----------------------------------------------------------4
Open the Top panel-------------------------------------------------5
Montherboard installation------------------------------------------5
HDD installation------------------------------------------------------6
ODD installation------------------------------------------------------8
PSU installation -----------------------------------------------------9
PCI or PCIE slot installation---------------------------------------9
Close the Top panel------------------------------------------------10
Open the card reader door ----------------------------------------10
PCB+cables reference diagram ---------------------------------11

1 2 7 8 93 11
e6V overview
①. Power button
②. Power blue LED
③. VFD acryl window
④. TOP panel
⑤.IR acryl window
⑥.Card reader Door
⑦. USB port
⑧. Card reader
⑨.ODD button
⑩.Latch of door
⑪.Slot of ODD
⑫.80x80x25mm fan
⑬. Top plate handle opening
⑭.ODD bracket
⑮.Card reader PCB board
⑯.PCI slot*4
⑰. VFD screen PCB board
⑱. IR receiver
⑲. HDD bracket
⑳. Power PCB board
4
Model: e6V
Material: 100% full Aluminum
Color：Silver / black / Gold
VFD screen：an VFD screen
Motherboard：Mini ITX / Micro ATX
HDD drive bay：1X3.5”+2X3.5’’ HDD drive bay
ODD drive bay：1×5.2’’ standard optical drive
Cooling：2x80X80X25mm ultra-quiet fans
Expansion Slots：4XStandard small PCI slots
Front I/O Port：2x USB ports
Card Reader：Multi-card Reader
Dimension：435mm×390mm×112mm (L×W×H)
Power Supply：Standard ATX PSU bay
Remote control：Optional the MCE remote control built-in IR receiver
Net Weight：5.7KG
654 10
13 16 1714 15 18 2012 19 1213

Open the top plate
Rotating plate, open handle and open
plate , and take out the cover plate.
Shown as photos
Motherboard installment
Take off 6 ODD stents screws, and
take out the ODD holder
Put I/O baffle plate firstly
Put motherboard lock screw secondly
Alignment, lock screw holes
Shown as photos
5

HDD installment
Unload the HDD holder screws,
and take out the HDD holder
Put 2.5inch HDD first , and then
alignment , lock screws holes
To put the holder with 2.5inch
HDD into the right place of case,
lock screws
Shown as photos
6

Take out the 3.5inch HDD screw and anti-
vibration pad, lock it to the both side of the
HDD, shown as the photo( pay attention to
the install way of anti-vibration pad)
After locked the screws in both side of HDD,
and then put the HDD into the bracket ,
shown as the photo lock screw manually
Shown as photos
7

ODD installment
Put the ODD into the ODD bracket,
alignment holes, and lock screws.
Shown as the photo
To put the ODD button into the cases
To put the holders, which have been
put ODD, into the case, alignment
holes, and lock the 6 screws
Shown as photos
8

Power supply installment
To put the POWER supply into the case, alignment the hole , and lock the screws
Shown as photos
9
PCI or PCIE expand installment
To exit the baffle plate screws first , and then take out the baffle plate
Put the PCI or PCIE expand card , lock screws, shown as photo
Shown as photos

Cover the top plate
Connect all the electric component according to the electric diagrammatic drawing
Check the installation position and connections again after finished the inner
installment, cover the plate lastly
Shown as the photos
press top right corner of the card reader door to
open the card reader door
Shown as photos
10
Tear down the Rubber sheet of 3M gum on the ODD door, to put the
ODD door on the ODD place and Stick on the ODD
Shown as photos

GA-H55N-USB3
motherboard
For example
② ④
⑥ ⑧
USB
USB
USB
F-panel
F-panel
Cables connect sketch map
9
1
9
1
VFD Front
24/3 pin PWR EXT Cable
11

Add: No. 809 8F A Area, Huameiju
Business Center, Xinhu Rd, Block
82 Baoan District Shenzhen, China
518102
Tel: [phone] 400 6088 126
Fax: [phone]
E- mail: [e-mail]
http://www.wesena.com