West Ocean WS-604 User manual

P
WS-604 V2.06
DIGITAL LED CLOCK
User Guide
WEST OCEAN

West Ocean WS-604 Digital LED Clock User Guide V2
1
Table of Contents
1. What’s in the box ........................................................ 2
2. Get to know your LED Clock ..................................... 3
3. Getting Started............................................................ 4
4. Using the Remote Control Unit ................................. 6
5. Timer functions........................................................... 9
6. Using a smart phone or PC to control your clock . 10
Connect your device with your LED Clock .................. 10
Set up Wi-Fi .................................................................11
Optional: Access your clock through Static IP ............. 12
Set/synchronize the time automatically via Internet .... 13
Control your Clock remotely via Web Browser ............ 13
Set up Daily/Hourly Alarms.......................................... 14
Set up and cycle Countdown timer.............................. 15
Change password to connect your clock..................... 15
7. Setting the time with the remote control unit......... 16
8. Updating your Clock................................................. 17
9. Multiple Mounting options ....................................... 19
10. Instruction on conceal installation........................ 20
11. Customer Support .................................................. 21
12. Specifications ......................................................... 21
13. Using Tips ............................................................... 21

West Ocean WS-604 Digital LED Clock User Guide V2
2
1. What’s in the box
Digital
LED Clock
User
Guide
Remote
Controller
Power Adapter
(2m cord)
2 Screws
2 wall plugs
Electrical wire
for concealed
installation

West Ocean WS-604 Digital LED Clock User Guide V2
3
2. Get to know your LED Clock
The Front:
Yellow light on: Buzzer on Blue light on: Alarm set
Yellow light off: Mute Blue light off: No Alarm set
Green light on: Wi-Fi connected
Green light off: Wi-Fi connect lost
The Side:

West Ocean WS-604 Digital LED Clock User Guide V2
4
The Back:
3. Getting Started
Power up your LED Clock using included power adapter.
Default time zone is UTC-8.
The time displayed by the LED clock can be set in three ways:
a. Wi-Fi with Internet access
This is the recommended setup for the LED clock.
The LED clock have built-in technology to use Wi-Fi to
connect to a standard Internet time server. With this
feature, it maintains current time automatically without
intervention.
Requirement:
•Smart phone with browser
•Wi-Fi network information

West Ocean WS-604 Digital LED Clock User Guide V2
5
Wi-Fi SSID/network name
Wi-Fi Password
Time zone
See Set/Synchronize the time automatically via Internet for the
procedure to set/synchronize the LED clock time with the
Internet time server.
b. Smart Phone
The LED clock time is set to the same (current) time
with a smart phone.
Requirement:
•Smart phone with browser
See Set/Calibrate the time via your smart phone or PC for the
procedure to set/synchronize the LED clock time with a smart
phone.
c. Remote control unit
The LED clock can be used without Wi-Fi. It is like any
normal clock in which the time is specified by hour and
minute using the remote control unit.
Requirement:
•Remote control unit
See Using the Remote Control Unit for the procedure to set
time manually using the remote controller.

West Ocean WS-604 Digital LED Clock User Guide V2
6
4. Using the Remote Control Unit
1. Press M1 to display current Time.
2. Press M2 for 99-0 SECONDS Countdown
•Using numeric keypad until your desired Countdown
SECONDS is displayed in SS:MS.
Example: to set up 2 S and 34 MS countdown, press
number 0 2 3 4. By incorrect input, press M2 to delete.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
3. Press M3 for 99-0 MINUTES Countdown
•Using numeric keypad until your desired Countdown
MINUTES is displayed in MM:SS.
Example: to set up 5 M and 59 S countdown, press
number 0 5 5 9. By incorrect input, press M3 to delete.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
4. Press M4 for 99-0 HOURS Countdown
•Using numeric keypad until your desired Countdown
HOURS is displayed in HH:MM.
Example: to set up 3 M and 59 S countdown, press
number 0 3 5 9. By incorrect input, press M4 to delete.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
5. Mode 5 - Set up 0-99 SECONDS Count up Timer

West Ocean WS-604 Digital LED Clock User Guide V2
7
•Press until number 5 displayed.
•Press to confirm selected mode. Display format
is 00:00 (SS:MS).
•Press to start timer or pause.
•It will beep one time when the timer reaches 99
Seconds and stop.
6. Mode 6 - Set up 0-99 MINUTES Count up Timer
•Press until number 6 displayed.
•Press to confirm selected mode. Display format
is 00:00 (MM:SS).
•Press to start timer or pause.
•It will beep one time when the timer reaches 99 Min.
and 59 Sec and stop.
7. Mode 7 - Set up 0-99 HOURS Count up Timer
•Press until number 7 displayed.
•Press to confirm selected mode. 00:00 (HH:MM)
will be displayed. Under this mode, the colon ‘:’ will
flash at timing and stop at pause.
•Press to start timer or pause.
•It will beep one time when the timer reaches 99 Hours
and 59 Minutes and stop.

West Ocean WS-604 Digital LED Clock User Guide V2
8
8. Mode 8 - Set up desired number display
•Press until number 8 displayed.
•Press to confirm selected mode. The LED
screen will be dark. Using numeric keypad to show
your desired number or time or score to display.
•Press to choose to show colon ‘:’ or not
•Press to change.
9. ON/OFF
To turn on or off the screen when you are using it as clock.
10. 12/24
Press this button to switch between 12/12-Hour Time.
11. Mute
Press this button to mute the clock. Please note the clock
will only beep if you entered wrong input.
Note: You don’t need Wi-Fi to use Remote Controller.
However, if you want to calibrate the clock, set up alarms or change default
setting of Countdowns, you will need to connect your Clock with Wi-Fi.

West Ocean WS-604 Digital LED Clock User Guide V2
9
5. Timer functions
The LED clock features pre-configured countdown timers.
M2-Seconds
Countdown
Count down from
99 seconds:99 milliseconds to 0.
Default value is 24 seconds.
M3-Minutes
Countdown
Count down from 99 minutes:59 seconds
to 0. Default value is 5 minutes.
M4-Hours
Countdown
Count down from 99 hours:59 minutes to 0.
Default value is 1 hour 30 minutes.
Mode 5
Seconds Timer
Counting from
0 to 99 seconds:99 milliseconds.
Mode 6
Minutes Timer
Counting from
0 to 99 minutes:59 seconds.
Mode 7
Hours Timer
Counting from
0 to 99 hours:59 minutes.

West Ocean WS-604 Digital LED Clock User Guide V2
10
6. Using a smart phone or PC to control your clock
Connect your device with your LED Clock
a. Go to the Wi-Fi settings of your smart phone or computer
b. Look for and connect to the Wi-Fi network with “WS-XXXX”
c. Enter Password “12345678” to connect. (You can change
this password afterwards. Refer to “Change password to
connect your clock”)
d. Once your device is connected to your LED Clock, open
your web browser and type
“192.168.4.1” in the URL
address bar. Press Enter or Go.
Note: This network provides access to
the LED Clock setup page only. If you
see an “Unsecured Network” or “No
Internet Connection” message, please
ignore it and connect anyway.
e. The LED clock system appears.

West Ocean WS-604 Digital LED Clock User Guide V2
11
Set up Wi-Fi
a. Select “Wi-Fi Settings” on
main menu.
b. On the “Wi-Fi Settings”
screen, enter name of your
Wi-Fi network and password.
c. Check “Adjust for US daylight
savings time automatically”.
d. Select correct Time zone.
e. Tap on “Save”.
f. Unplug clock, wait for 3-5
seconds, and plug it back in.
g. Upon success connection, green light on the screen will
turn on automatically. The LED clock time will
automatically update/adjust to the correct current time.
h. Reload the browser. The browser will display the LED
clock’s IP address (Local IP) assigned by your network
automatically.
As the LED clock is now connected to the user’s Wi-Fi
network, go to the Wi-Fi settings of your device and select the
normal Wi-Fi network.
Open your web browser and in the URL address bar enter the
assigned Local IP address to launch the Control Menu.

West Ocean WS-604 Digital LED Clock User Guide V2
12
Moving forward, access to the LED clock (i.e. for remote
control or changing the settings) will be through the Local IP
address.
Optional: Access your clock through Static IP
If the clock is on a network with a lot of devices, it can be
annoying to look up the Local IP address assigned through
steps above when you need to access your clock remotely.
Because if the clock hasn't connected in a few days, its IP
address can be assigned to something else.
Utilizing a static IP address on your clock avoids any IP
address conflicts and provides more accurate geolocation
than a dynamic IP address. To configure static IP for your
clock manually, you will need to know:
•Available IP address on your network
•Gateway IP
•Subnet Mask
You can find all this information on your computer and/or
router depending on the device and network you are using.
Once you obtain all this information,
•go to “Wi-Fi Settings” on main menu, enter all
information on the loaded page
•Check “Static IP”
•Tap on SAVE and restart your Clock.

West Ocean WS-604 Digital LED Clock User Guide V2
13
Moving forward, access to the LED clock (i.e. for remote
control or changing the settings) will be through the Static IP
address.
Set/synchronize the time
automatically via Internet
a. Select “Clock Calibration” on
main menu.
b. On the next screen, select
“Sync Time”.
c. Upon completion, the
message “Successfully
Calibrated” will appear to
indicate the LED clock time is
now the same as your device.
Control your Clock remotely via Web
Browser
a. Select “Remote Control” on
main menu.
b. Manage your LED clock like
using a Remote Control unit on
the loaded screen.
c. Note: If the screen stopped to
respond, just refresh the page.

West Ocean WS-604 Digital LED Clock User Guide V2
14
Set up Daily/Hourly Alarms
a.Select “Alarm Settings” on main
menu.
b.On the next screen, tap the
desired
- Daily Alarm or Hourly Alarm
- to set/configure.
c.When setting up Daily Alarm:
- Specify the time
- Specify the day(s) of the
week
d.When setting up Hourly Alarm, specify the minute when
the LED clock will sound. For example, specify 0 so that
the LED clock will sound as each hour starts.
e.Tap “Save” when done.
Once the alarm has been set up successfully, blue light on
the LED clock screen will turn on to indicate alarm(s) have
been configured/set.

West Ocean WS-604 Digital LED Clock User Guide V2
15
Set up and cycle Countdown timer
Manage settings for button M2,
M3, M4 on the remote
a.Select “Countdown Timer
Settings” on main menu.
b.On the loaded screen, tap to
manage your desired timer
settings upon your personal
preference and tap Save.
c.Select the countdown timer you
would like to cycle automatically.
d.Tap “Save”.
Change password to connect your clock
a.Select “New Password for
Access Point” on main menu.
b.On the loaded screen, enter old
password “12345678”
c.Enter new password
d.Tap “Save” and restart your
clock.
Note: Set up a new password will
require you to reset your Wi-Fi
Settings. After restarting your
clock, repeat steps set up Wi-Fi again.

West Ocean WS-604 Digital LED Clock User Guide V2
16
7. Setting the time with the remote control unit
•Unplug your Clock
•Press and hold the “MODE” button on the back of
the clock, while plug in power adapter
•Release the “MODE” button
•The clock displays “1” indicating “Time Setup Mode”.
•Follow instructions below, we take 17:41, Sunday,
November 04, 2018 as example:
By incorrect entering, it will beep and won’t go to next step.
Note: To set up Day of The WEEK
01 for Monday 02 for Tuesday
03 for Wednesday 04 for Thursday 5 for Friday
06 for Saturday 00 for Sunday

West Ocean WS-604 Digital LED Clock User Guide V2
17
8. Updating your Clock
If you would like to know software updates, please email our
support team at [email protected]
a. Download update file (ws604_v2.0X_XX) from support
team. Please check name and size of the downloaded file
to make sure it is the correct version.
b. Connect your Clock with your device as below.
Note: If you are using static IP, just type your static
IP/update in the URL address bar and enter.
Skip to point “e”.
c. Go to the Wi-Fi settings of your smart phone or computer
and connect to the Wi-Fi network name started with “WS-
XXXX”
d. Enter Password “12345678” to connect.

West Ocean WS-604 Digital LED Clock User Guide V2
18
e. Open your web browser and in the URL address bar
enter 192.168.4.1/update and press Enter or Go.
User name: admin
Password: admin
Note: Case Sensitive
f. On the loaded page, upload
the file (ws604_ v2.0X_XX)
you received from our support
team.
BE CAREFUL when you are updating
the file: MAKE SURE you have selected the correct file.
Uploading WRONG file will lead the clock to malfunction and
this is irrevocable!
g. Upon successful updating, your LED Clock will beep
and restart itself.
Important: Follow these steps to apply new software:
1. Unplug the clock. (wait for 5-10 seconds)
2. Press / hold the “ON/OFF” button on the back of the clock.
3. Plug in power adapter.
4. Release the “ON/OFF” button after the beep..
Congratulations!
You have just updated your LED Clock!

West Ocean WS-604 Digital LED Clock User Guide V2
19
9. Multiple Mounting options
We offer you with multiple mounting options.
Place it on tripod through
integrated tripod mounting
hole.
2 Screws and 2 plastic expansion anchors for
mounting in-wall.
Electrical wire for concealed installation in-wall.
Note: With built-in G sensor, the clock has auto-rotate function. You
can place it or install it in any direction you want despite of position of
the power cord.