Westell CS40-734834-00D-A0 User manual

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 1 of 52
5689
CS40-734834-00D-A0 2.5W Public Safety
Signal Booster
Users Guide
PRODUCT MANUAL

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 2 of 52
DISCLAIMER
All information and statements contained herein are accurate to the best of Westell Technologies knowledge.
Westell makes no warranty with respect there to, including without limitation any results that may be obtained
from the products described herein or the infringement by such products of any property rights of any persons.
Use or application of such information or statements is at the users’ sole risk, without any liability on the part of
Westell. Nothing herein shall be construed as license or recommendation for use, which infringes upon any
propriety rights of any person. Product material and specifications are subject to change without notice. Westell
standard terms of sale and the specific terms of any particular sale apply.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 3 of 52
Table of Contents
TABLE OF FIGURES ..................................................................................................................... 6
LIST OF TABLES........................................................................................................................... 7
Preface 8
Purpose8
Scope 8
Audience................................................................................................................................................................8
Document Organization.........................................................................................................................................8
References...........................................................................................................................................................10
Document Conventions........................................................................................................................................10
Safety Notices......................................................................................................................................................11
Technical Support ................................................................................................................................................11
Acronyms and Abbreviations...............................................................................................................................11
Copyright and Trademark Acknowledgements.....................................................................................................11
1 GENERAL INFORMATION ......................................................................................................12
1.1 Document Purpose and Intended Users.........................................................................................................12
1.2 Application.....................................................................................................................................................12
1.3 Product Registration Information...................................................................................................................12
1.4 Safety Guidelines ...........................................................................................................................................14
1.5 Important Safety Information ........................................................................................................................15
1.6 FCC Part 90 Signal Boosters ............................................................................................................................15
▣FCC Part 15 Class A....................................................................................................................................17
1.7 FCC Contact Information: ...............................................................................................................................18
2 PRODUCT OVERVIEW............................................................................................................19
2.1 Product Information.........................................................................................................................19

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 4 of 52
2.2 Product Features............................................................................................................................................20
2.3 Included Accessories......................................................................................................................................21
2.4 Optional Accessories......................................................................................................................................22
3 PRODUCT SPECIFICATION .....................................................................................................23
3.1 RF Specifications ............................................................................................................................................23
3.2 Power Specification........................................................................................................................................25
3.3 Mechanical Specification................................................................................................................................25
3.4 Environmental Specification...........................................................................................................................26
3.5 GUI Items.......................................................................................................................................................26
3.6 Alarm Status ..................................................................................................................................................27
3.7 Alarm Relay....................................................................................................................................................28
4 PRODUCT APPEARANCE........................................................................................................30
4.1 External Configuration ...................................................................................................................................30
5 INSTALLATION GUIDELINES...................................................................................................31
5.1 Important Installation Guidelines...................................................................................................................31
5.2 Donor Antenna Installation Guidelines ..........................................................................................................32
5.3 Indoor Antenna Installation Guidelines..........................................................................................................33
5.4 Mounting the Signal Booster..........................................................................................................................34
5.5 Verifying the Physical System Setup...............................................................................................................35
5.6 Controlling the Signal Booster........................................................................................................................35
5.7 Connecting to the Alarm Relay Panel .............................................................................................................36
5.8 Connecting the Power Cable ..........................................................................................................................39
5.9 Connecting the Battery Back-up Cable ...........................................................................................................41
5.10 BBU Specification.........................................................................................................................................41
6 SYSTEM OPERATION..................................................................................................42

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 5 of 52
6.1 Operating the Program...................................................................................................................................42
6.2 Web GUI System Status..................................................................................................................................43
6.3 Alarm Page.....................................................................................................................................................43
6.4 RF Configuration ............................................................................................................................................45
6.5 Annunciator Test............................................................................................................................................47
7 SYSTEM SOFTWARE UPGRADE..............................................................................................48
7.1 Upgrading the System Software.....................................................................................................................48
7.3 Network (WAN) Setting..................................................................................................................................49
APPENDIX A IMPORTANT PRODUCT INFORMATION ............................................................ 50
A.1 Registration Number .....................................................................................................................................50
A.2 ETL 50
A.3 Configuration LIST..........................................................................................................................................50
APPENDIX C UL2524 INSTALLATION GUIDELINES.................................................................. 52

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 6 of 52
TABLE OF FIGURES
Figure 1-1: Product Registration……..................................................................................................... 12
Figure 4-1: External Product Configuration.......................................................................................... 27
Figure 5-1: Repeater Mounting Bracket Mounted on Repeater Rear.................................................. 30
Figure 5-2A: Ethernet Cable................................................................................................................. 31
Figure 5-2B: Ethernet Connectors........................................................................................................ 32
Figure 5-3: Stripped Cable Conductors……........................................................................................... 32
Figure 5-4: Alarm Relay 18-wire Gland Connector M6110 .................................................................. 33
Figure 5-5: Alarm Relay Cable Connected to Repeater........................................................................ 33
Figure 5-6: Remove the Power Connector Cap.................................................................................... 35
Figure 5-7: Connector Keys.................................................................................................................. 36
Figure 5-8: Power Cable Connected to Repeater……........................................................................... 36
Figure 5-9: Power Cable Connected to Repeater................................................................................. 37
Figure 5-10: Battery Cable Connected to Repeater............................................................................. 38
Figure 6-1: Network Connection Set-up .............................................................................................. 39
Figure 6-2: Destination Directory…….…………………............................................................................... 40
Figure 6-3: Software Installation…………………....................................................................................... 40
Figure 6-4: CS40-734834-00D-A0 GUI Log-
In……………….......................................................................................... 41
Figure 6-5: Status Mode………………………............................................................................................... 42
Figure 6-6: Control Mode………............................................................................................................. 47
Figure 7-1: Firmware Upgrade Progress Window showing File Open tab ........................................... 52
Figure 7-2: Firmware Version Check….................................................................................................. 53
Figure 7-3: System Upgrade Status...................................................................................................... 53
Figure 7-4: IP Settings........................................................................................................................... 54
Figure 7-5: IP Change WIndow............................................................................................................. 54
Figure 7-6: Static IP Address….………………………..................................................................................... 55
Figure 7-7: DHCP IP Address….............................................................................................................. 55

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 7 of 52
LIST OF TABLES
Table P-1: Document Conventions...................................................................................................... 10
Table 2-1: Included Accessories........................................................................................................... 17
Table 2-2: Optional Accessories .......................................................................................................... 18
Table 3-1: RF Specifications................................................................................................................. 19
Table 3-2: Power Specifications........................................................................................................... 20
Table 3-3: Mechanical Specifications................................................................................................... 21
Table 3-4: Environmental Specifications.............................................................................................. 22
Table 3-5: GUI Items............................................................................................................................. 22
Table 3-6: Alarm Status........................................................................................................................ 24
Table 3-7: Alarm Relay......................................................................................................................... 25
Table 5-1: Alarm Relay Connections.................................................................................................... 34
Table B-1: Acronyms and Abbreviations.............................................................................................. 57

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 8 of 52
Preface
This Preface includes the following:
 Purpose
 Scope
 Audience
 Document Organization
 References
 Document Conventions
 Safety Notices
 Technical Support
 Acronyms and Abbreviations
 Copyright and Trademark Acknowledgements
Purpose
This manual contains information and procedures for the operation of the Westell CS40-734834-00D-
A0 Public Safety Signal Booster.
Changes that occur after the publishing date may be incorporated by a complete manual revision or
as additions.
Scope
Reference this manual when there is a need to add enhanced signal capability to a new or existing
system, to monitor a system, make maintenance adjustments, or address alarms.
Audience
This manual is intended for installers and users who are familiar with similar types of equipment.
Document Organization
This manual includes the following chapters:
• Chapter 1: General Information –Outlines the document purpose and intended users,
application, product registration, safety guidelines, disclaimer and FCC Part 90, FCC Warning
Labels.
• Chapter 2: Product Overview –Provides product information, describes product features
and lists accessories.
• Chapter 3: Product Specification –Provides tables containing RF, power, mechanical and
environmental specifications. Also provides information about GUI items, alarm status and
alarm relay.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 9 of 52
• Chapter 4: Product Appearance –Provides physical specifications, photographs and
information about the external and internal Signal Booster configuration.
• Chapter 5: Installation Guidelines –Lists guidelines for installing the Signal Booster and
antennas.
• Chapter 6: Software Installation –Outlines the steps required to install the software.
• Chapter 7: System Operation –Describes product operation, including how to open the
communication port and describes the functions in the Status and Control pages.
• Appendix A: Important Product Information –Provides the product registration number
and internal power supply information.
• Appendix B: Acronyms and Abbreviations –A table of acronyms and abbreviations and
definitions for each.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 10 of 52
References
• FCC Part 90
Document Conventions
Table P-1 lists the conventions used throughout this document.
Table P-1: Document Conventions
Convention
Description
DANGER!
Description of an imminent hazard that, if not avoided, may result in severe personal
injury or death. Before you work on equipment, be aware of the hazards involved with
electrical and RF circuitry and be familiar with standard practices for preventing
accidents.
WARNING!
Description of an imminent hazard that, if not avoided, may result in personal injury or
serious equipment damage.
CAUTION
Description of a conditions or practice that could cause damage to equipment or
property. Communicates information that is crucial to preventing loss of data or damage
to hardware or software, and actions that could result in equipment failure.
IMPORTANT
Additional important information that the user must be aware of, but is not related to a
hazard.
NOTE
Additional information that is beneficial for the user to know, but is not related to a
hazard.
Bold
Bold text indicates an action or provides emphasis.
Click
Instructs the user to press the primary (typically left) mouse button while the pointer is
over the specified location.
Right-click
Instructs the user to press the secondary (typically right) mouse button while the pointer
is over the specified location.
Double-click
Instructs the user to press the primary (typically left) mouse button twice, rapidly, while
the pointer is over the specified location.
Select
Instructs the user to perform a selection on the screen by clicking an active object.
Enter
Instructs the user to type text using the keyboard.
>
Indicates a level in a menu. For example, Start>Programs prompts the user to click on
Start, then locate and click Programs under the Start menu.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 11 of 52
Safety Notices
This general safety information applies to both operating and service personnel. Specific warnings and
cautions are located in other parts of this manual where they apply and may not appear in this
summary. Failure to comply with these precautions or specific warnings elsewhere in the manual
violates the safety standards of design, manufacture, and intended use of equipment.
Westell assumes no liability for the customer’s or user’s failure to comply with these requirements:
• Explosive atmospheres - To avoid explosion or fire, do not operate this product in the
presence of flammable gases or fumes.
• Lightning danger - Do not install or make adjustments to this unit during an electrical storm.
WARNING!
Changes and Modifications not expressly approved by Westell can void your
authority to operate this equipment under Federal Communications Commission’s
rules.
Technical Support
If you suspect a malfunction with this product or have a technical question, call your dealer or the
Westell Support Line at: [phone], Toll Free (USA) 1-800-377-8766, press option 2, and then
option 3. Westell Support can also be reached via email at Sup[email protected].
Acronyms and Abbreviations
Refer to Appendix B for definitions of the acronyms and abbreviations used in this manual.
Copyright and Trademark Acknowledgements
The following products are referred to in this manual:
• is a registered trademark of Westell Technologies, Inc.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 12 of 52
1 General Information
1.1 Document Purpose and Intended Users
The purpose of this document is to provide a step-by-step procedure to help experienced technicians or
engineers install and commission an in-building Passive Wireless Distributed Antenna System (DAS)
using Westell’s CS40-734834-00D-A0 2.5W Public Safety Signal Booster. Follow the instructions in this
guide to minimize risks associated with modifying a live system and preclude service interruptions. This
document assumes the technician or engineer understands the basic principles and functionality
involved with an RF Signal Booster and in-building wireless systems. This guide has been written to
address the practical concerns of the installer.
1.2 Application
Use this guide whenever there is a need to add enhanced signal capability to an existing system or
when a Signal Booster is included in a new installation.
1.3 Product Registration Information
Username and Password are provided by Westell. After signing in, you can modify and check
information in SYSTEM SETTING.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 13 of 52
Figure 1-1: Product Registration

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 14 of 52
1.4 Safety Guidelines
The general safety information in this guideline applies to both operations and service personnel.
Specific warnings and cautions are located in the applicable manual sections, but may not appear in this
summary. Failure to comply with these precautions or specific warnings elsewhere in the manual
violates safety standards of design, manufacture, and intended use of equipment. Westell assumes no
liability for the customer’s failure to comply with these requirements:
Grounding: This Signal Booster is designed to operate at 100-240V~, 50/60Hz, 2A power and must
always be operated with the ground wire properly connected. The ground wire must be at least 16 AWG
and must be connected to the building ground.
Explosive atmospheres: To avoid explosion or fire, do not operate this product in the presence of
flammable gases or fumes.
Lightning danger: Do not install or adjust this unit during an electrical storm.
No user-serviceable parts are inside the unit. Hazardous voltages are present when the cover is
removed. Opening the chassis will void your warranty. If you suspect a malfunction with this product,
call your dealer or Westell’s technical support line at 1.877.844.4274.
CAUTION
Turn the Signal Booster power off when connecting or disconnecting cables.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 15 of 52
1.5 Important Safety Information
Antennas used for the purpose of radiating signals indoors are limited to a maximum gain of 3 dBi.
Each antenna must be positioned to observe minimum separation requirements from all users and
bystanders.
The following guidelines must be used when considering separation distances:
• Indoor antennas must be placed so that under normal conditions, personnel cannot come
within 20 cm (~8 in) of any inside antenna. Adhering to this minimum separation will ensure
that the employee or bystander cannot exceed RF exposures beyond the maximum
permissible limit as defined by FCC Regulations section 1.1310 Limits for general
population/uncontrolled exposure.
• Outdoor antenna must be positioned so that under normal conditions, personnel cannot
approach closer than 120 cm (~4 ft.). A directional antenna having a maximum gain of 3.75
dBi is used, and precautions should be taken to prevent personnel from routinely passing
through the main radiation beam at a distance closer than specified.
1.6 FCC Part 90 Signal Boosters
WARNING!
THIS IS A 90.219 CLASS B DEVICE
This is not a consumer device. It is designed for installation by FCC licensees and qualified
installers. You must have an FCC license or express consent of an FCC License to operate
this device. You must register class B signal boosters (as defined in 47 CFR 90.219) online
at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant
forfeiture penalties, including penalties in excess of $100,000 for each continuing
violation.
FCC Warning Labels
The following labels will appear on the CS40-734834-00D-A0 Signal Booster in accordance with the FCC:

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 16 of 52
FCC Label Placement on the CS40-734834-00D-A0:
Right-Side View

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 17 of 52
▣FCC Part 15 Class A
Note:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 18 of 52
1.7 FCC Contact Information:
Federal Communications Commission
445 12th Street SW
Washington, DC 20554
Phone: [phone]
TTY: 1-888-835-5322
Fax: [phone]

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 19 of 52
2 Product Overview
2.1 Product Information
The CS40-734834-00D-A0 Signal Booster was developed for use in enclosed structures where signals
from local public safety towers to operate mobile units is poor or unavailable. Adequate signal
strength must be available outside the structure as a prerequisite to achieving in-building coverage.
The device is connected to an external antenna, normally located on a roof, and to one or more
internal antennas placed strategically throughout the area where wireless service is desired.
The external antenna is typically directional, such as a Yagi or Panel antenna. Internal antennas are
typically omnidirectional, although various other types may be used, depending on the coverage
application. The Signal Booster amplifies both the uplink (mobile to base) and downlink (base to
mobile) signals, thus facilitating communications to and from the intended wireless infrastructure.
With a maximum total of 90 dB nominal gain the downlink and 80 dB nominal gain the uplink, gain
can be adjusted over a range from 60(50) dB to 90(80) dB in 1 dB steps.
The Signal Booster is controlled using a computer connected to the RJ45 Female Network Connector
labeled ‘GUI’. There are also LED indicators to indicate alarm status, OSC and power. Refer to Figure
4-1.
The key features of this product are seamless interface to the 700/800 5W Composite DAS Ready
Dual Band Class A/B Public Safety Repeater (PSR), Modular Optical Master Unit (OMU) supporting 8
(eight) remote locations, local service area coverage at shared OMU and PSR location 5W composite
output power (2.5W each band), 32 UL Class A filters, mirrored operation and control through a
common GUI with the PSR. The product will also support Class B operation with filters selectable
wider than 75kHz. The product will be UL2524 compliant and certified.

CS40-734834-00D-A0 Product Manual
April 2020, Rev A
WESTELL.COM
© 2019 Westell Technologies April 2020; Doc No. CS14702802UM rD
1.877.844.4274 Page 20 of 52
2.2 Product Features
• Easy installation
• Light and small
• Control using a Windows-based Graphical User Interface (GUI) and accessed by connecting
a laptop or desktop computer to the 8P8C/RJ45 Female Network Connector labeled ‘GUI’
• User gain control
• Automatic level control
• Automatic shutdown function
• Oscillation protection
• Overdrive protection
• Under/over voltage protection
• Fault protection
• Alarm notification
• SNMP
• Persistent status and error information
• Battery Back-up Input