Westfire UNIQ 26 User manual

1 - Insert both base bricks (9 and 10) on
their respective sides. Then place the
Metal spacer (12) inbetween bricks at
front with curved edge facing the rear of
the chamber.
VERMICULITE FIREBRICK INSTALLATION SEQUENCE - UNIQ 26,27,28
Ÿ1 - Top Left Turbulence Brick
Ÿ2 - Top Right Turbulence
Brick
Ÿ3 - Rear Brick
Ÿ4 - Left Side Brick
Ÿ5 - Right Side Brick
Ÿ6 - Left Small Side Brick
Ÿ7 - Right Small Side Brick
Ÿ8 - Baffle Brick
Ÿ9 - Left Base Brick
Ÿ10 - Right Base Brick
Ÿ11 - Base Grate
Ÿ12 - Metal Spacer
12
3
45
67
8
9
10
11
12

Rear brick (3) fits in space behind two base bricks with edges
sloping to the back of stove.
Place both side bricks (4 and 5) with their angled edge
matching that of the rear brick so that the two meet flush.
Insert top turbulence bricks (1 and 2) this is done by
manoeuvring brick once its above side support panel then
placing brick balanced on both support panel and central
beam.
Small side panels (6 and 7) are then fitted in front of the main
side panels.
Grate 11 placed between two base bricks.
Baffle brick is placed with back side sitting on top of rear
brick baffle is then held up while metal pins are place in pre
drilled holes of side bricks then the baffle is left to settle on
these pins.