Westinghouse WSF6606 User manual

USER MANUAL
DISHWASHER
WSF6606
Applicable to WSF6606 dishwashers
with serial numbers greater than 82100000
For previous models go to page 27

2
Important safety instructions . . . . . . . . . . . . . 3
Recycling . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information . . . . . . . . . . . . . . . . . . .3
Recommendations . . . . . . . . . . . . . . . . . . . 4
Items not suitable for dishwashing . . . . . . . . . . 4
Description of your appliance . . . . . . . . . . . . . 5
Technical specifications . . . . . . . . . . . . . . . . 5
Conformity with the standards and Test data . . . 5
Quick Start Guide . . . . . . . . . . . . . . . . . . . . 7
Installing the machine . . . . . . . . . . . . . . . . . 8
Positioning the machine . . . . . . . . . . . . . . . . 8
Water connections . . . . . . . . . . . . . . . . . . . 8
Water inlet hose . . . . . . . . . . . . . . . . . . . .8
Water outlet hose . . . . . . . . . . . . . . . . . . . 9
Electrical connection . . . . . . . . . . . . . . . . . 9
Fitting the machine undercounter . . . . . . . . . .9
Preparing the machine for use . . . . . . . . . . . . 11
Prior to using the machine . . . . . . . . . . . . . .11
Detergent usage . . . . . . . . . . . . . . . . . . . .11
Filling the detergent compartment . . . . . . . . . 11
Combined detergent . . . . . . . . . . . . . . . . . . 11
Filling with rinse aid and setting . . . . . . . . . . 12
Loading your dishwasher . . . . . . . . . . . . . . . 13
Alternative basket loads . . . . . . . . . . . . . . . 16
Standard loading and Test data . . . . . . . . . . 18
Program descriptions . . . . . . . . . . . . . . . . . 18
Program items . . . . . . . . . . . . . . . . . . . . 18
Switching on the machine and selecting a program 19
Switching on the machine . . . . . . . . . . . . . 19
Progress indicator . . . . . . . . . . . . . . . . . . 19
Changing a program . . . . . . . . . . . . . . . . . 19
Cancelling a program . . . . . . . . . . . . . . . .20
Switching the machine o . . . . . . . . . . . . . 20
Maintenance and Cleaning . . . . . . . . . . . . . . . 21
Filters . . . . . . . . . . . . . . . . . . . . . . . . . 21
Spray arms . . . . . . . . . . . . . . . . . . . . . . 22
Hose filter . . . . . . . . . . . . . . . . . . . . . . . 22
Failure codes and what to do in case of failure . . .23
Practical and useful information . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . .24
Notes . . . . . . . . . . . . . . . . . . . . . . . . . .25
Warranty . . . . . . . . . . . . . . . . . . . . . . . . .27
ENVIRONMENTAL TIPS
ENVIRONMENTAL TIPS
Information on disposal for users
•Most of the packaging materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
•If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.
Congratulations and thank you for choosing our product.
We are sure you will find your new appliance a pleasure
to use and a great asset to your cooking. Before you use
the appliance, we recommend you
read through the whole user manual which provides
a description of the product and its functions.
To make the best use of your new appliance, it is
important that the appliance is installed correctly and
that you read the safety instructions carefully to avoid
misuse and hazards. We recommend that you keep this
instruction booklet for future reference and pass it on
to any future owners. This appliance complies with the
requirements of Australian Standard AS/NZ 60335.2.5.
Conditions of use
This appliance is intended to be used in household
and similar applications such as:
•Staff kitchen areas in shops, offices and other
working environments
•Farm houses
•By clients in hotels, motels and other residential
type environments
•Bed and breakfast type environments.
Record model and serial number here:
Model: ............................................................................
Serial number:............................................................
TIPS & INFORMATION
TIPS AND INFORMATION
Important: Check for any damage or marks.
If you find the dishwasher is damaged or marked, you
must report it within 7 days if you wish to claim for
damage/marks under the manufacturer’s warranty.
This does not affect your statutory rights.
CONTENTSCONGRATULATIONS
CONTENTS
IMPORTANT INFORMATION THAT MAY
IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual
is extremely important for health and safety. Failure
to strictly adhere to the requirements in this manual
may result in personal injury, property damage
and affect your ability to make a claim under the
Westinghouse manufacturer’s warranty provided
with your product. Products must be used, installed
and operated in accordance with this manual. You
may not be able to claim on the Westinghouse
manufacturer’s warranty in the event that your
product fault is due to failure to adhere this manual.

3IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
These warnings have been provided in the interest of
safety. You MUST read them carefully before installing or
using the appliance.
Please read the user manual carefully and store in a
handy place for later reference. Pass the user manual on
to possible new owners of the appliance.
If you need assistance, contact your Customer Care
Department. The manufacturer will not accept liability,
should these instructions or any other safety instructions
incorporated in this book be ignored.
WARNING
WARNING
This symbol indicates information concerning your
personal safety.
TIPS & INFORMATION
TIPS AND INFORMATION
This symbol indicates tips and information about
use of the appliance.
ENVIRONMENTAL TIPS
ENVIRONMENTAL TIPS
This symbol indicates tips and information about
economical and ecological use of the appliance.
Recycling
• Certain components and the packaging of your
machine have been produced from recyclable
materials.
• Plastic parts are marked with international
abbreviations: (>PE< , >PS< , >POM<, >PP<, ....)
• Cardboard parts have been produced from recycled
paper and they should be disposed of into waste
paper collection containers for recycling.
• These materials should not be disposed of into
garbage bins. They should be delivered to recycling
centres instead.
• Contact relevant centres in order to obtain
information on methods and points of disposal.
Safety Information
When you take delivery of your machine
• Check for any damage to your machine or to its
packaging. Never start a damaged machine, make
sure to contact an authorised technician.
• Unwrap the packaging materials as indicated and
dispose of them in accordance with the rules.
The points to pay attention during machine
installation
• Choose a suitable, safe and level location to install
your machine.
• Carry out the installation and connection of your
machine by following the instructions.
• This machine should be installed and repaired by
an authorised technician only.
• Only original spare parts should be used with the
machine.
• Before commencing the dishwasher installation,
be sure that the machine is unplugged.
• Check whether the indoor electrical fuse system
is connected according to the regulations.
• Make sure that the electrical information on the
rating plate is the same as the power supply. If not,
contact an electrician.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the mains plug
and to the mains cable. Should the mains cable need
to be replaced, this must be carried out by our
• Authorised Service Centre.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Pay special attention and make sure that the machine
does not crush the power cord.
• Never use an extension cord or a multiple socket
to make a connection. The plug should be easily
accessible after the machine has been installed.
• After installing the machine, run it unloaded for
the first time.
In daily use
• Do not use water spray and steam to clean the
appliance.
• Do not stand, sit or place a load on the open door of
the dishwasher, it may fall over.
• Only use detergents and rinse aids which are
produced specifically for dishwashers. Otherwise
Electrolux does not take any responsibility for
damage that might occur to your machine.
WARNING
WARNING
The water in the machine’s washing section is not
drinking water, do not drink it.
• Due to danger of explosion, do not put into the
machine’s washing section any chemical agents
such as solvents.
• Check whether plastic items are heat-resistant before
washing them in the machine.
• Do not put into your machine those items which
are not suitable for dishwashing. Also, do not
overload basket.
• The machine door should not be opened while the
machine is in operation, to avoid the risk of hot water
spraying out. A safety device ensures that
the machine stops if the door is opened.

4SAFETY INFORMATION AND REOMMENDATIONS
SAFETY INFORMATION AND RECOMMENDATIONS
SAFETY
WARNING
WARNING
Do not leave your dishwasher’s door open, this may lead
to accidents and injury.
WARNING
RISK OF INJURY OR
PERMANENT DISABILITY
Place knives and other sharp ended objects in the
cutlery basket in the point down position.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
For your children’s safety
•After removing the machine’s packaging, make
sure that the packaging material is out of reach
of children.
•Do not allow children to play with or start the
machine.
•Keep your children away from detergents and
rinse aids.
•Keep children away from the machine while it
is open because there may still be residues of
cleaning substances inside the machine.
•Be sure that your old machine does not pose any
threat to children. Remove the dishwasher door
lock and power supply cord.
In case of malfunctioning
•Any malfunction in the machine should be repaired
by qualified persons. Any repair work performed by
anyone other than the authorised service personnel
will cause your machine to be left outside the scope
of warranty.
•Prior to any repair work on the machine, be sure to
unplug the dishwasher from the power supply. Do
not pull by the cable when unplugging. Make sure
to turn off the water tap.
Recommendations
•For energy and water saving, remove coarse residues
on your dishes before placing the dishes into the
machine. Start your machine after having fully loaded
it.
•Use the pre-wash program only whenever necessary.
•Place items such as bowls, glasses and pots into
the machine face down.
Items not suitable for dishwashing:
•Cigarette ashes, candle leftovers, polish, paint,
chemical substances, iron-alloy materials;
•Forks, spoons and knives with wooden or bone, ivory
or nacre-coated handles; glued items, items soiled
with abrasive, acidic or base chemicals;
•Plastic items that are not heat-resistant, copper
or tin coated containers;
•Aluminium and silver objects (they may discolour,
become dull);
•Certain delicate glass types, porcelains with
ornamental printed patterns (may fade even after
the first wash); certain crystal items (may lose their
transparency over time), laminated cutlery that is not
heat-resistant, lead crystal glasses, cutting boards,
items manufactured with synthetic fibre;
•Absorbent items such as sponges or kitchen rags are
not suitable for dishwashing.
WARNING
WARNING
Some dishwasher detergents are strongly alkaline. They
can be extremely dangerous if swallowed. Avoid contact
with the skin and eyes and keep children away from
the dishwasher when the door is open. Check that the
detergent compartment is empty after completion of
wash cycle.

5DESCRIPTION OF YOUR APPLIANCE
DESCRIPTION
DESCRIPTION OF YOUR APPLIANCE
TECHNICAL SPECIFICATIONS
Capacity....................................................................15 place settings
Height ........................................................................................850 mm
Height (without worktop).............................................820* mm
Width........................................................................................... 598 mm
Depth........................................................................................... 598 mm
Net weight......................................................................................54 kg
Electricity input.................................................220-240 V, 50 Hz
Total power ................................................................................1900 W
Heating power..........................................................................1800 W
Pump power ..................................................................................100W
Drain pump power..................................................................... 30 W
Water supply pressure ........ 0.03 MPa (0,3 bar) - 1 MPa (10 bar)
Water supply temperature ........................................................ 5 - 60°C
Current.................................................................................................10 A
1Worktop
2Upper basket with racks
3Upper spray arm
4Lower spray arm
5Filters
6Lower basket
7Rating plate
8Control panel
9Detergent and rinse-aid dispenser
10 Cutlery basket
11 Active drying unit
12 Ceiling spray rose
• Electrolux reserves the right to amend
design and technical specifications.
• Do not use this appliance with power and
temperature specifications different to
those indicated.
• Do not change the specification of this
appliance.
* with counterweight and insulation removed
1
2
3
4
5
6
7
8
9
10
11
12

6DESCRIPTION OF YOUR APPLIANCE
1Power button
When pressed on, the machine is energised and
the power light illuminates.
2Hygiene button
By using this option, washing temperature and time
during respective programs may be changed, this
ensures more hygienic washing.
3Tablet button
Use this option when using combined detergent
that contains rinse aid and extra functions.
4Door handle
Use door handle to open-close the door of the machine.
5Program button
With the program button, you can select a suitable
program for your dishes.
6Upper basket button
By using the ‘Upper Basket Wash ‘ feature, you can wash
the dishes only on upper basket, reducing the duration
of your selected programs, and decreasing your power
and water consumption.
7Start/Pause button
The Start/Pause button will start the selected program.
In the Pause condition while wash indicator light is on,
Start/Pause led will blink.
8Rinse aid power indicator
When the rinse aid light illuminates, fill the rinse aid
chamber. The power light indicates power is available
to the appliance.
NOTE: If you have used an extra option on the last
washing program, this feature will remain active also
on the next washing program. To deselect an option on
the newly selected washing program, press the selected
option button again, and check that the indicator light on
the option button goes off.
9Progress indicator Lights
Program status can be monitored via the progress
indicator lights on control panel.
• Wash
• Dry
• End
10 Time Indicator and delay display
The time indicator displays the program time and time
remaining for the program.
In addition you can delay the start of the program by
pressing the “+” and “-” buttons before the program is
commenced. The delay function is indicated by the letter
“H” followed by the number of hours selected.
If you want to change the delay time, you can reset it by
pressing START/PAUSE and then using the “+” and “–”
buttons to select the new delay time, then press START/
PAUSE to activate.
Child Lock operation
In order to activate child lock, press “+” and “–” buttons
simultaneously for 3 seconds. At this time, “CL” appears
for 2 seconds on remaining time indicator. To deactivate
child lock, press “+” and “–” buttons again simultaneously
for 3 seconds. “CL” will blink once.
DESCRIPTION
DESCRIPTION OF YOUR APPLIANCE
DESCRIPTION
12 3 4 5 6 7
8910

7QUICK START GUIDE
QUICK START GUIDE
QUICKSTART
Switching on the machine
Progress indicator
Changing a program
Cancelling a program
You can follow the program flow using the progress
indicator up lights located on the control panel.
If you would like to change programs
while a washing program is on.
If you want to cancel current program for any reason.
Press the POWER button
Additonal functions Start the program pressing
the START/PAUSE button
Once the POWER button is
pressed, the START/PAUSE
symbol illuminates.
During the washing cycle
the WASH light is on
Press the PAUSE/START button
Hold the PAUSE/START
button for 3 seconds
The END light starts flashing and water
inside the machine will drain for 30
seconds. The program is cancelled when
the END light stops flashing
After the dishwasher stops, select
the desired program by pressing
the PROGRAM button
Press the PAUSE/START
button to commence
new program
Once the program is completed the END light comes on.
Do not open the dishwasher until this light comes on.
The START/PAUSE button turns
off once the program starts
and the WASH light is on
Once completed the
DRY light will illuminate
and the machine will run
silently whilst drying.
Select the program
via the PROGRAM
selector button
1
1
1
1
2
2
2
2
3
3
3
4

8INSTALLING THE MACHINE
INSTALLATION
Positioning the machine
• When considering the location for the dishwasher,
ensure that there is adequate space to enable
loading and unloading of the dishes
• Do not put your machine in any location where
the ambient temperature can fall below 5°C.
• Before positioning, take the machine out of its
packaging by following the warnings located on
the package.
• Position the machine close to a water tap and drain.
You need to postion your machine, taking into
consideration that its connections will not be altered
once they are made.
• Do not grip the machine by its door or panel in
order to move it.
• Take care to leave a certain clearance from all sides of
the machine so that you can comfortably move
it back and forth during cleaning.
• Make sure that the water inlet and outlet hoses do
not get squeezed while positioning the machine.
Also, make sure that the machine does not stand
on the electrical cable. Adjust the machine’s feet so
that it is level and stable. Proper positioning of the
machine ensures problem-free opening and closing
of its door.
• If the door of your machine does not close properly,
check if the machine is stable on the floor; if not,
adjust the feet and ensure it is level and stable.
Water connection
Ensure that the indoor plumbing is suitable for installing
a dishwasher and complies with AS/NZS 3500.1.
Also, we recommend that you fit a filter at the entrance
of your place or apartment so as to avoid any damage to
your machine because of any contamination (sand, clay,
rust etc) that might be occasionally carried in through
the main’s water supply or the indoor plumbing, and to
avoid problems of staining and formation of deposits
after washing.
Water inlet hose
Do not use the water inlet hose of
your old machine, you must use the
new water inlet hose supplied with
your machine. Before connecting
the water inlet hose to the water
tap, ensure clean water is flowing
from the tap before making the
connection. Connect the water inlet
hose directly to the water inlet tap.
The pressure supplied by the tap
should be at a minimum of 0.03
MPa and at a maximum of 1 MPa. If
the water pressure is above 1 MPa, a pressure-relief valve
should be installed.
WARNING
WARNING
Only turn the locking nut to secure hose - do not turn
the hose.
• The first time you use the appliance, make sure that
there is no leakage.
• The water inlet hose has a safety valve and a sheath
with an inner mains cable.
After the connections are made, the tap should be
turned on fully and checked for water tightness. For the
safety of your machine, make sure to always turn off the
water inlet tap after each wash program
is finished.
WARNING
WARNING
NOTE: Aquastop inlet hose has
components using 240V. Do not cut
Aquastop inlet hose. Do not let it get
folded, twisted, kinked or crushed.
WARNING
WARNING
NOTE: A water tempering valve is required if the water
temperature is
over 60°C.
WARNING
CAUTION
Always use new hoses when you connect the appliance
to the water mains. Old hoses must not be used. The
water inlet hose must be examined at an interval of twelve
months for deterioration and replaced if necessary.
In order to pass the safety valve through the kitchen
cabinets, an opening of at least 45mm x 90mm is
needed.
Water drain hose
If you connect the water
drain hose to a trap spigot
under the sink, remove the
plastic membrane. If you
do not remove the entire
membrane, remaining food
can cause a blockage in the
drain hose spigot. Ensure a
hose clamp is used to secure
the hose to the spigot.
INSTALLING THE MACHINE
Remove
entire
internal
membrane
30cm
min.

9INSTALLING THE MACHINE
INSTALLATION
Water drain hose
The water drain hose can be
connected either directly to
the water drain hole or to the
sink outlet spigot. Using a
hose hook (if available), the
water can be drained directly
into the sink by positioning
the hose hook over the edge
of the sink.
This connection should be at a minimum of 50 cm and at
a maximum of 110 cm above the base of the dishwasher.
WARNING
WARNING
Maximum drain hose length
is 4m. Longer hose length will prevent correct draining,
and result in poor wash performance.
INSTALLING THE MACHINE
WARNING
WARNING
Electrical Connection
The plug of your machine should be connected to an earthed
outlet that supplies suitable voltage and current. If there is no
earthing installation, have a competent electrician carry out
an earthing installation. In case of usage without earthing
installed, our company will not be responsible for any loss of
usage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is designed for 220-240 V. The machine
should not be plugged in during installation.
•Always use the molded plug supplied with your machine.
•Running in low voltage will cause a decline in
washing quality.
•The machine’s electrical cable should be replaced by
an authorised service or an authorised electrician only.
Failure to do so may lead to accidents.
•For safety purposes, always make sure to disconnect the
plug when a wash program is finished.
•In order not to cause an electric shock, do not unplug
when your hands are wet.
•When disconnecting your machine from the mains supply,
always pull from the plug. Never pull the cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether
you have sufficient space under your countertop and whether
the wiring-plumbing is suitable to do so.
1 To ensure the stability of the dishwasher for an
underbench installation, if the underbench dimension is
greater than 820mm, any gap between the dishwasher
and the underside of the benchtop should be bridged
with a packing piece. This may be achieved by wedging
a piece of timber between the dishwasher and the
benchtop as shown
2 If required, remove the worktop as shown in the
illustration.
3 To remove the worktop, remove the screws that hold the
worktop which are located at the rear of the machine;
then push the front panel 1 cm from the front towards
the rear and lift it.
570
465
97
85
598
596
850 820
Timber
wedging
piece
Bench top
3mm gap
Filler piece
cut to suit
installation
Floor level
12
3

10 INSTALLING THE MACHINE
INSTALLATION
INSTALLING THE MACHINE
4 Adjust the machine feet according to the slope
of the floor.
5 Fit your machine by pushing it undercounter
without letting the hoses get crushed or bent.
WARNING
WARNING
After removal of worktop, ensure the opening for the
dishwasher is according to the following dimensions.
5
4
min. 600mm
820mm
570mm

11PREPARING THE MACHINE FOR USE
PREPARATION
PREPARING THE MACHINE FOR USE
If your dishes are from the previous day and there is
dried food waste on them, or if you have fully loaded the
dishwasher, pour 5cm3detergent onto the base of the
door and start your machine.
Combined detergent
Detergent manufacturers also produce combined
detergents called “2 in 1”, “3 in 1” or “5 in 1” etc.
“2 in 1” detergents contain detergent or rinse aid.
When using “2 in 1” detergent make sure to check
the specifications of the tablet.
Other tablet detergents contain detergent + rinse aid
+ various extra functions/additives.
Generally, combined detergents produce acceptable
results under certain usage conditions only. These
detergents contain rinse aid in preset amounts.
Points to consider when using these type of products:
• Always make sure to check the specifications of
the detergent you will use or whether or not it is
a combined detergent.
• Check if the detergent used is appropriate for the
hardness of mains water.
• Observe the instructions on packaging when
using such products.
• If detergents are in the form of tablets, never put
them into the interior section or the cutlery basket
of the dishwasher. Always put the tablets into the
detergent compartment in the detergent dispenser.
• Tablets produce good results for certain types of
usage only. If you are using this type of detergent,
you need to contact the manufacturer and find out
about the suitable conditions of use.
• When the conditions of use of such products and
the machine settings are appropriate, they ensure
savings in rinse aid consumption.
• Contact the detergent manufacturers if you are not
obtaining good wash results (if your dishes have
limescale and stay wet) after having used 2 in 1 or
3 in 1 detergents. The scope of warranty for your
machine does not cover any complaints caused by
the use of these types of detergents.
Recommended usage: If you want to obtain better
results while using combined detergents, add rinse aid
into your machine and adjust the rinse aid setting to the
lowest position.
Solubility of the tablet detergents produced
by different companies can vary depending on
the temperature and time. Therefore, it is not
recommended to use these detergents in short
programs. It is more suitable to use powder detergents
and rinse aid in short programs.
WARNING
WARNING
Should any problem occur which you have not
encountered before, with the use of these types of
detergents, contact the detergent manufacturers directly.
Prior to using the machine for the first time
• Check whether the electricity and water supply
specifications match the values indicated by the
installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Fill the rinse aid compartment.
Detergent usage
Use a detergent specifically designed for use in domestic
dishwashers. You can find powder, gel, and tablet
detergents in the market that have been designed for
household dishwashers. Detergent should be put into
the compartment prior to starting the machine. Keep
your detergents in cool, dry places out of reach of
your children. Do not fill detergent into the detergent
compartment more than required; otherwise it may etch
your glasses as well as leaving undissolved detergent
in the dishwasher. Should you need more information
concerning the detergent to use, contact detergent
manufacturers directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown
in the image.
The Detergent pod has level lines inside. It is possible to
measure the right detergent amount using these lines.
The detergent pod can take a maximum of 40cm3
detergent.
Open the dishwasher detergent pod and pour 25cm3
if your dishes are heavily soiled or 15cm3if they are less
soiled.
You may have to add more detergent into your machine,
depending on the degree of soil and the water hardness
in your area.

12 PREPARING THE MACHINE FOR USE
PREPARATION
PREPARING THE MACHINE FOR USE
When you STOP using combined detergents
• Fill the rinse aid compartments.
• Select a suitable rinse aid setting.
Filling with rinse aid and setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap.
Fill the compartment with rinse aid until MAX level
and then close the cap.
Be careful not to overfill the rinse aid compartment
and wipe up any spills.
RINSE-AID
In order to set rinse aid level, follow below steps:
Push the program (button 5 as shown above) and hold
it down.
Turn on the machine (button 1).
Hold down the program button (5) until “r:A” disappears
from the display.
The machine will display the last setting.
Set the level by pushing the “+” and “-” buttons (10).
Switch off the machine to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted,
increase the rinse-aid level. If blue stains form on your
dishes, decrease the rinse-aid level.
Level Rinse-aid dose Indicator
1 0 r:1
2 1.5mL r:2
3 3mL r:3
4 4.5mL r:4
5 6mL r:5
TIPS & INFORMATION
TIPS AND INFORMATION
Only use rinse aid suitable for automatic dishwashers.
As rinse aid residues left as a result of overflowing will
create extremely high amounts of foam and reduce the
washing performance, remove the excess amount of
rinse aid by wiping it with a cloth. Remove all excess
rinse aid if spilt while filling.
1 510

13LOADING YOUR DISHWASHER
LOADING
LOADING YOUR DISHWASHER
Correctly loaded dishes will result in the best energy
consumption, washing and drying performance. There
are two separate baskets for you to load your dishes
into your machine. You can load into the lower basket
round and deep items as pots with long handles, pot lids,
plates, salad plates, and cutlery sets.
The upper basket has been designed for tea plates,
dessert plates, salad bowls, cups and glasses. When
placing long-stem glasses and goblets, lean them
against the basket edge, rack or glass support wire and
not against other items. Do not lean long glasses against
one another if they are unsupported, they may break. It
is more appropriate to locate the thin narrow parts into
the middle sections of baskets. You can place spoons
among the other cutlery sets in order to prevent them
from sticking to one another. You are recommended to
use the cutlery grid in order to obtain the best result.
To avoid any possible injuries, always place such long-
handle and sharp-pointed items such as serving forks,
bread knives etc. with their sharp points facing down or
horizontally on the baskets.
TIPS & INFORMATION
TIPS AND INFORMATION
Ensure the position of the dishware does not prevent the
upper or lower spray arm from turning.
Top basket Cup Rack
These racks are designed to increase the capacity of the
top basket. You can place your glasses and cups on the
racks. You can adjust the height of these racks. Thanks
to this feature, you can place different sizes of glasses
under these racks. The cup racks can be adjusted to 3
height positions. In addition, you can place long forks,
knives and spoons horizontally, so
that they do not block the rotation of the spray arm.
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket
of your machine is designed to let you adjust the height
of your top basket (ref to diagram 1) upwards or (refer
to diagram 2) downwards, without removing it from
your machine when it is full, to create more space at the
top or bottom area of your machine as needed. Basket
of your machine is set to upper position in factory
settings.
In order to raise your basket, hold it from both sides and
pull it upwards. In order to lower it, hold it from both
sides again, pull upwards then lower carefully.
Make sure that both sides are in the same position
(up or down).
12

14 LOADING YOUR DISHWASHER
ab
Spoon rack/Glass Support
It allows your long-stemmed glasses to be washed safely
as well as providing a convenient alternative location to
wash spoons and forks. Do not lean your long-stemmed
goblets and glasses against each other but towards
the spoon rack, so that during the washing cycle this
prevents glasses and goblets from being damaged.
There are 4 different positions for your spoon rack.
Depending on the type of long stemmed glasses, you
can set your spoon rack to the positions number 1 and 2.
Use it for your spoons and forks while it was in position 1.
If you do not want to use the spoon rack positions 3 or 4
are available.
LOADING YOUR DISHWASHER
LOADING
If you do not want to use spoon rack, you can bring it to
the positions 3 or 4, so that you can form larger-volume
areas in the upper basket b.
12
34

15LOADING YOUR DISHWASHER
Lower Basket Folding Racks
Folding tines (prongs) consisting of four parts that
are located on the lower basket of your machine are
designed in order to let you place big items easier such
as pots, pans, etc. If required, each rack can be folded
separately, or all of them can be folded and larger spaces
created. You can use folding tines (prongs) in the upright
position, or by folding.
LOADING YOUR DISHWASHER
Modular cutlery basket
Depending upon the amount of soiled cutlery, the basket
can be separated into two parts. Hold the basket from
both sides and move each side in opposite directions.
To combine the baskets reverse the procedure.
The cutlery basket handles are adjustable, position (a)
or (b). When separated, the baskets can be used in the
upper or lower dishwasher basket as required.
LOADING
a
b
12

16 LOADING YOUR DISHWASHER
LOADING YOUR DISHWASHER
Alternative basket loads
Lower Basket
LOADING
Alternative modular basket position

17LOADING YOUR DISHWASHER
LOADING
LOADING YOUR DISHWASHER
TIPS & INFORMATION
TIPS AND INFORMATION
Examples of incorrect loading
Top Basket

18 LOADING YOUR DISHWASHER
LOADING
PROGRAM DESCRIPTIONS
Program items
* Recommended program for normally soiled load.
** Only powder detergent should be used in the Rinse program.
At the end of the program, for improved drying results, it is recommended the door be opened approximately 50mm
for some minutes before removing the dishes.
WARNING
WARNING
Short programs do not include a drying step. The values declared above are the values obtained under laboratory
conditions according to relevant standards. These values can change depending on conditions of product’s use
and environment (network tension, water pressure, water input temperature and environment temperature).
NAME OF
PROGRAM RINSE** FAST 30 ECO* TIME SAVE HEAVY INTENSIVE
WASHING
TEMPERATURE - 40°C 50°C 65°C 60°C 65°C
TYPE OF FOOD
SOILS
Pre wash to
rinse and
loosen food
residue
Fresh
coffee,
milk, tea,
cold meat,
vegetables
Fresh
coffee,
milk, tea,
cold meat,
vegetables
Baked on
soup, sauce,
pastry, egg,
rice, potato
and meats
cooked in
oven, fried
food
Fresh
coffee,
milk, tea,
cold meat,
vegetables
Dishes with
dense dried
on soils or
for hygienic
washing
LEVEL OF
FOOD SOILS Small Small Medium Medium Medium High
AMOUNT OF
DETERGENT
A: 25GM/ 15GM
B: 5GM
A: 15 A: 25
B: 5
A: 25
B: 5
A: 25
B: 5
A: 40
B: 5
NA Pre-wash 40°C Wash Pre-wash 65°C Wash Pre-wash Pre-wash
Finish Cold Rinse 50°C Wash Intermedi-
ate Rinse 60°C Wash 55°C Wash
Hot Rinse Cold Rinse Hot Rinse Cold Rinse 65°C Wash
End Hot Rinse End Hot Rinse Cold Rinse
Dry Dry Intermedi-
ate Rinse
End End Hot Rinse
Dry
PROGRAM
TIME (MINS) 15 30 122 50 94 167
POWER
CONSUMPTION
(KW HOUR)
0.02 0.84 0.95 1.21 1.34 1.73
WATER
CONSUMPTION
(LITRES)
4.2 10.9 13.5 10.7 14.4 24.6
SELECTABLE
OPTIONS Upper
basket
Upper
basket
Upper
basket
Upper
basket
Tablet Tablet Tablet Tablet Tablet
Hygiene Hygiene Hygiene Hygiene
Information for test laboratories
For all the necessary information for performance testing, send an email to dishw[email protected]
In your mail please provide the model number and PNC number that is on the rating plate on the appliance door.

19PROGRAM DESCRIPTIONS
PROGRAMS
SWITCHING ON THE MACHINE AND SELECTING A PROGRAM
Start the program by pressing
the START/PAUSE key
Changing a program
If you would like to change programs
while a washing program is on.
Switching on the machine
Progress indicator
You can follow the program flow using the progress
indicator lights located on the control panel.
Press the POWER button
Select the program suiting your
dishes via the PROGRAM button
You can choose an
additonal function
During the washing cycle the
WASH light is on
Once the program is completed the END light comes on
Do not open the dishwasher until this light comes on
Once completed the
DRY light will illuminate
and the machine will run
silently whilst drying
Press the PAUSE/
START button
After the program stops, select the desired
program pressing the PROGRAM select button Press the PAUSE/START
button to start the selected
new program
1
1
1
2
2
2
3
3
3
4

20 SWITCHING ON THE MACHINE AND SELECTING A PROGRAM
SWITCHING ON
Press and hold the START/PAUSE button
for approx. 3 sec. until END light blinks
Cancelling a program
If you would like to cancel a program
while a washing program is in progress.
TIPS & INFORMATION
TIPS AND INFORMATION
NOTE: If the machine door is opened during washing or
the power is cut off, the machine resumes the program
when the door is shut or the power comes back.
NOTE: For better drying results when the program has
finished, keep the door ajar for some minutes before you
remove the dishes.
After END light starts blinking, the water
inside is discharged for approx. 30 sec.
Once END light comes on, it means
that the cycle has been cancelled
Switching the machine off
When the END light comes on, switch your
machine off by using the POWER button
Pull the plug out of the outlet.
Turn off the wter tp
1
1
2
2