Westinghouse iGen1000s User manual

iGen1000s
Portable Power Station
1500 Running Watts | 3000 Peak Watts
USER MANUAL
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have questions or need assistance, please call customer service at
855-944-3571.

2 | Westinghouse Outdoor Power Equipment, LLC
TABLE OF CONTENTS
FCC STATEMENT.............................................................................. 4
FCC RADIATION EXPOSURE STATEMENT..................................... 4
GENERAL SAFETY RULES............................................................... 4
SPECIFICATIONS.............................................................................. 6
WHAT’S IN THE BOX? ...................................................................... 6
REGISTERING YOUR PRODUCT..................................................... 6
CONTROLS AND OUTLETS.............................................................. 7
DC OVERLOAD PROTECTION......................................................... 8
AC OVERLOAD PROTECTION......................................................... 8
LCD DISPLAY .................................................................................... 9
OPERATION..................................................................................... 10
HOW TO POWER DC DEVICES .................................................... 10
COLD WEATHER USE .................................................................... 10
POWER STATION OUTPUT CAPACITY ......................................... 10
SERIES OPERATION ...................................................................... 11
UPS OPERATION ............................................................................ 11
AC CHARGING ................................................................................ 12
VEHICLE CHARGING...................................................................... 12
SOLAR CHARGING......................................................................... 13
SOLAR SERIAL CHARGING ........................................................... 13
SOLAR SERIAL AND PARALLEL CHARGING ................................ 14
CLEANING ....................................................................................... 15
TRANSPORTATION AND STORAGE .............................................. 15
RECYCLING..................................................................................... 15

Westinghouse Outdoor Power Equipment, LLC | 3
WARNING: Lithium-ion batteries and
products that contain lithium-ion batteries
can expose you to chemicals including cobalt
lithium nickel oxide, and nickel, which are
known to the State of California to cause
cancer and birth defects or other reproductive
harm. For more information go to www.
P65warnings.ca.gov.
DISCLAIMERS
All information, illustrations, and specications
in this manual were in effect at the time of
publishing. The illustrations used in this manual
are intended as representative reference
views only. We reserve the right to make any
specication or design change without notice.
ALL RIGHTS RESERVED
All rights reserved. No reproduction allowed
in any form without written permission from
Westinghouse Outdoor Power Equipment, LLC.
DANGER
Read this manual before using
this product. Failure to follow
the instructions and safety
precautions in this manual can
result in damage to the product
or personal property, or serious
injury or death. DO NOT use
the product with incompatible
components or alter the product
in any way.
SAVE THESE INSTRUCTIONS
The following terms are used in this document
to indicate various levels of potential harm that
may be caused by improper operation.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates a situation which can cause
damage to the power station, personal
property, and/or the environment, or cause
the equipment to operate improperly.

4 | Westinghouse Outdoor Power Equipment, LLC
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) This device must accept
any interference received, including interference
that may cause undesired operation.
FCC RADIATION EXPOSURE
STATEMENT
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum distance
of 8 inches (20cm) between the radiator &
your body. Changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTICE
The equipment has been tested and
meets the restrictions of Category B digital
equipment in Part 15 of FCC Rules.
These restrictions are designed to provide
reasonable protection against harmful
interference in housing installation.
This equipment will generate, use and radiate
radio frequency energy. If it is not installed
and used according to the instructions, it
may cause harmful interference to radio
communication.
However, there is no guarantee that
interference will not occur in a particular
installation.
If the device does cause harmful interference
to radio or television reception (which can be
determined by switching off and switching
on devices), users are advised to attempt to
correct the interference by one or more of the
following measures:
• Re-adjusting or placing the receiving
antenna.
• Increase the distance between the device
and the receiver.
SAFETY
WARNING
Improper use may result in re, property
damage, or personal injury. Make sure to use
the product according to the following safety
rules and guidelines.
WARNING
Do not expose the iGen1000s to any liquid or
submerge in water. If the battery comes into
contact with water, it may cause chemical
decomposition of the battery. This may cause
the battery to catch re or explode.
GENERAL SAFETY RULES
• If the unit falls into the water during use,
take it out immediately and put it in a safe
and open area. Keep a safe distance from
it until it is completely dry. Never use it
again and dispose it properly as described
in the Battery Disposal section below.
• Never disassemble, puncture, shock, or
incinerate the unit or the accessories.
• Never use or charge swollen, leaky, or
damaged unit. If your battery is abnormal,
contact Westinghouse customer service
or a Westinghouse authorized dealer for
further assistance.
• DO NOT use the batteries in strong
electrostatic or electromagnetic
environments. Otherwise, the battery
control board may malfunction and cause a
serious accident during use.
• DO NOT drop the unit. Do not use the unit
if it was dropped or in a vehicle during an
accident.
• DO NOT place heavy objects on the
machine
• If the unit catches re, use re
extinguishing equipment in the following
order: water or water mist, sand, re
blanket, dry powder, carbon dioxide re
extinguisher.

Westinghouse Outdoor Power Equipment, LLC | 5
• DO NOT expose the unit to microwave
energy or a pressurized container.
• DO NOT allow pins, wires or other metal
pieces to be inserted into the device case,
outlets, or controls. Metal pieces may short
circuit the product.
• DO NOT disassemble, repair or modify the
unit or the battery.
• DO NOT place the unit close to or in a re
or expose it to heat. Keep out of direct
sunlight.
• DO NOT charge, use or store the unit in a
bathroom or in an area exposed to rain or
moisture.
• Only use the outlets to power external
devices. Never connect the outlets to main
building power under any circumstances.
• DO NOT touch the unit or the plug-in points
if your hands are wet.
• DO NOT connect any metallic objects to
the AC input or output.
• DO NOT rub your eyes if uid from inside
the unit gets on your hands.
• DO NOT dispose the unit together with
household waste.
• DO NOT use any inappropriate or damaged
power cords.
• DO NOT operate the unit above the
specied input voltage.
• DO NOT use the unit if it is not functioning
correctly.
• DO NOT move the unit if it is recharging or
in use.
• DO NOT leave unit outside in rain or snow.
• Use and store the unit only in a clean and
dry environment. DO NOT use and store in
dusty or wet environment.
• Check the unit prior to every use. DO NOT
use the unit if it is damaged or broken.
• DO NOT use the unit if the power cord is
damaged or broken.
• Keep the unit away from children. DO NOT
let children use the Power Station.
• Keep this product away from pets.
• DO NOT use or store the unit in an area or
environment with high temperature.
• Should uid from inside of the unit come in
contact with your skin or clothing, wash the
affected areas with tap water.
• In a storm, unplug the power cord from the
socket.
• DO NOT charge the unit via power supply
systems that operate outside of 120V
range.
• DO NOT place the unit on its side or upside
down while in use or storage.
• If rust, peculiar odors, overheating or other
abnormal circumstances are observed,
stop using the unit immediately and contact
customer service.
• Make sure that the unit is properly secured
when transporting it in a motor vehicle.
• Only charge, use and store the unit within
an ambient temperature of
32° – 113°F (0° – 45°C).
• Turn the unit off immediately if it has
accidentally fallen, was dropped or was
exposed to vibrations.
• Carefully read the instructions for the
electric devices that you intend to connect.
• Make sure that the device you are
connecting is switched off before you
connect it.
• DO NOT use the product with incompatible
components or alter the product in any way.

6 | Westinghouse Outdoor Power Equipment, LLC
SPECIFICATIONS
Model Name: iGen1000s
Battery Cell
Chemistry: Lithium Ion (Li-ion) NMC
Capacity: 1008Wh (50.4V, 20Ah)
Running Watts: 1500W
Peak Watts: 3000W
Total Power: 1800W (1500AC / 300DC)
AC Output Voltage: 120V
Frequency: 50Hz or 60Hz
Sine Waves Type: Pure
Life Cycle: 800 Cycles to 60% Capacity
Charge Time:
With AC charger:
• 0-80% charge 2 hours
• 0-100% charge 3 hours
Charging
Temperature
Range:
32° – 113°F (0° – 45°C)
Operational
Temperature
Range:
-4° – 113°F (-20° – 45°C)
Series Capable: Yes
Warranty: 2 Years
Certications: FCC, RoHS, UN38.3, BC
WHAT’S IN THE BOX?
User Manual
1.5m Car Charge Cable
(Input)
Part# PS100003
1.5m AC Cable
(Input)
Part# PS100001
iGen1000s
3.5m Solar Charge Cable
(MC4 to XT60 Input)
Part# PS100002
REGISTERING YOUR PRODUCT
Registering your product Online at wpowereq.com/register. To register you will need the serial
number on the Power Station which is located on the bottom of the unit.
INTENDED USE
The Westinghouse iGen1000s Power
Station is intended as a power supply for
electronic devices with a maximum power
consumption of 1500W. Our product is
not suitable to be used with equipment
that relates to one‘s own personal
safety and relies heavily on electricity,
such as medical devices, equipment
for nuclear facilities, the manufacture
of air and spacecraft, etc. We therefore
assume no liability for accidents involving
personal safety, res, or machine failures
caused by using our product with the
aforementioned devices.

Westinghouse Outdoor Power Equipment, LLC | 7
CONTROLS AND OUTLETS
1. LCD display
2. 2 USB-A output ports
3. 2 USB-C output ports
4. DC ON/OFF button
5. 2 fast charge USB-A output ports
6. Main power ON/OFF button
7. AC ON/OFF button
8. Ventilation fans
9. 6 AC outlets (120V / 60Hz)
10. Car outlet
11. Solar / Car charging input port
12. AC charging input
13. Overload protection switch, 20A
1. LCD display: Display turns off after ve
minutes. Quickly push the ON/OFF button to
turn ON or OFF the display.
2. USB-A output ports: Charge devices such
as an iPhone, tablet, GoPro, speakers,
etc. The USB-A Output indicator light will
illuminate when a USB-A port is in use or
turned ON.
3. USB-C output ports: Devices that charge
through a USB-C port, such as a MacBook
Pro, Android phone, or other devices can
be charged by the iGen1000s USB-C port.
The USB-C Output icon will appear on LCD
Display when a USB port is in use.
4. DC ON/OFF button: Push and hold to turn
ON/OFF DC power. The DC Output indicator
light will illuminate when in use or turned ON.
Turning the DC ON/OFF button to the ON
position will keep the DC power ON for 24
hours to charge low-power devices, such as
earphones, which will not automatically turn
DC power ON.
5. Fast charge USB-A output ports: The
USB-A Output indicator light will illuminate
when a USB-A port is in use or turned ON.
Fast charge-enabled devices can be charged
at a maximum speed of 28W. If your device
does not support fast charging, the device will
charge at regular speed.
6
5
1
3
2
4
11 12 13
7
9
10
8
Full Sine Wave
6. Main power ON/OFF button: Push and hold
the power button to turn the unit ON or OFF.
Quickly push the Main Power ON/OFF button
to turn the LCD Display Screen ON or OFF
while in operation. The Power indicator light
will illuminate solid when any of the output
ports is in use. The Power Indicator Light
will ash when none of the output ports are
in use, signifying that the unit is in an Idle
State. After ve minutes in the Idle State,
the LCD Display Screen will enter into sleep
mode (the battery will still be in operation).
After 30 minutes in Idle State, the unit will
automatically shut down unless the DC ON/
OFF button is turned ON.

8 | Westinghouse Outdoor Power Equipment, LLC
7. AC ON/OFF button: The AC power needs
to be turned ON manually. Push and hold to
turn AC power ON/OFF. The indicator light
will illuminate when main power is ON. Turn
OFF when AC power is not in use to conserve
battery life. Unplug all power cord from the AC
ports when not in use. If the AC power is not
used for more than 12 hours, the unit will turn
off automatically. For 50Hz operation, push
and hold the AC ON/OFF for 15 seconds to
switch between 50 and 60Hz. Conrm 50 or
60Hz on LCD display before use.
8. Ventilation fans: The fans prevent the unit
from overheating. Never block or obstruct the
ventilation vents.
9. 6 AC outlets: Used to charge devices that
require 120V AC such as laptops, TVs, mini
refrigerators, vacuums, etc.
10. Car outlet: Used to charge devices that
require a car outlet to be charged, such as
drone batteries. The Car Outlet indicator
light will illuminate when the car outlet is in
use.
11. Solar / Car charging input: Supports a
maximum of three 110W solar panels to be
connected in series. Do not put more than
two solar panels in parallel connection.
iGen1000s has a limit input of 400W.
Supports car charge with a maximum input
of 10A.
12. AC charging input: Plug in the supplied AC
cord into the port and connect the three-pin
plug into a 120V/60Hz AC power source.
13. Overload protection button: If the input
current exceeds 20A during charging, the
AC charging port will trigger the overload
protection (See Notication Icons section).
When the overload indicator has turned off,
push the Overload Protection button to reset
and continue charging.
DC OVERLOAD PROTECTION
When any DC port is powering devices that
exceed maximum current limit, or the output
power of the AC jack exceeds the maximum
AC power output, the overload icon will be
shown on the display and the corresponding
interface indicator will ash simultaneously for
15 seconds. The output of the affected port
will be automatically turned off. Other ports will
continue to operate.
Remove the devices connected to the DC ports.
Make sure the Power Station can supply enough
continuous (running) and peak (starting) watts
for the items you will power at the same time
before reconnecting devices.
AC OVERLOAD PROTECTION
When the power output exceeds the battery
maximum power output, the overload icon will
be shown on the display and the corresponding
port indicator will ash simultaneously for 15
seconds. The unit will automatically shut down.
After an overload occurs, remove the connected
devices. Make sure the Power Station can
supply enough continuous (running) and peak
(starting) watts for the items you will power at
the same time before reconnecting devices.

Westinghouse Outdoor Power Equipment, LLC | 9
LCD DISPLAY
i
j
k
a. Remaining charge/discharge time in
minutes or hours g. Current input power in Watts
b.
Battery level indicator. If the battery
indicator is ashing, contact customer
support.
h. Current output power in Watts
b. Battery percentage of power
remaining i. Overload warning
d. High temperature indicator. Allow the
unit to cool before use. j. Indicates the usage status of each port
e. Low temperature indicator. Move the
unit to a warmer location. k. Notication icons
f. Fan indicator. Shows automatic
cooling fan is in operation

10 | Westinghouse Outdoor Power Equipment, LLC
OPERATION
Only operate the Power Station within the
recommended temperature range (-4° – 113°F
(-20° – 45°C)). Do not move the unit if it is
charging or in use.
HOW TO POWER AC DEVICES
1. Make sure the devices you are plugging in
are turned off.
2. Connect the power cable plug of the
electrical device into an AC outlet on the
Power Station.
3. Push the AC ON/OFF button to turn on AC
power. The button will illuminate when it is
turned on.
4. Turn ON the AC device.
5. The LED Display will show the real-time
wattage use of the device.
6. When nished, turn off all attached devices,
remove the power cable, then push the AC
ON/OFF button to turn OFF AC power. (If
you leave the AC ON/OFF button ON it will
deplete the battery.)
NOTICE: If the total output exceeds 1500W,the
power station will automatically shut off. Make
sure the Power Station can supply enough
continuous (running) and peak (starting) watts
for the items you will power at the same time.
WARNING
The AC outlets, AC voltage, and frequency
differ by country; carefully check whether the
Power Station specications are consistent
with the device specications before use,
otherwise, it can lead to dangerous situations.
HOW TO POWER DC DEVICES
1. Connect the power cable plug of the
electrical device to a USB outlet.
2. Push the DC ON/OFF button to turn on. The
button will illuminate when it is on.
3. The LED Display will display real-time
wattage of the device.
4. When nished, push the DC ON/OFF button
to turn off DC power.
NOTICE: If the total output exceeds the wattage
output of the DC outlet, the power station
will automatically shut off. Ensure the power
consumption is less than what the ports are rated
before connecting them to the Power Station.
COLD WEATHER USE
Cold temperatures (below freezing) can affect
the unit’s battery capacity due to chemical
characteristics of the battery. Keep the Power
Station within operational temperature range to
prolong battery life (-4° – 113°F (-20° – 45°C)).
POWER STATION OUTPUT
CAPACITY
NOTICE
Do not overload the capacity of the
iGen1000s. Exceeding the wattage/
amperage capacity can damage the Power
Station and/or electrical devices connected
to it.
Make sure the iGen1000s can supply enough
continuous (running) and peak (starting) watts
for the items you will power at the same time.
The total power requirements (Volts x Amps
= Watts) of all devices connected must be
considered. Device manufacturers usually
list rating information near the model or serial
number.
To determine power requirements:
1. Select the items you will power at the same
time.
2. Total the continuous (running) watts of these
items. This is the amount of power the Power
Station must produce to keep the items
running.
3. Estimate how many peak (starting) watts you
will need. Peak wattage is the short burst of
power needed to start electric motor-driven
tools or appliances such as a refrigerator.
Because not all motors start at the same
time, total peak watts can be estimated by
adding only the item(s) with the highest
additional peak watts to the total rated watts
from step 2.

Westinghouse Outdoor Power Equipment, LLC | 11
Example:
Tool or Appliance Running
Watts*
Peak (Starting)
Watts*
TV (Tube Type) 300 0
RV Refrigerator 180 600
Radio 200 0
Light (75 Watts) 300 0
Coffee Maker 600 0
1580 Total
Running
Watts*
600 Highest
Peak (Starting)
Watts*
Total Running Watts 1580
Highest Peak (Starting) Watts + 600
Total Watts Needed 2180
*Wattages listed are approximate. Verify actual wattage.
SERIES OPERATION
Two iGen1000s Power Stations can be
connected to provide continuous power with
twice the battery capacity.
Note: During series operation, do not connect
either of the Power Stations to the power
grid with an AC charging cable to prevent
activating the over-current protection.
1. Charge both Power Stations to 100%.
Note: Do not charge more than two Power
Stations at the same time to prevent an
excessive load on your home power grid.
2. Connect an AC cable to any AC outlets on the
Master unit and the other side of the cable to
the AC charging input port of the Active unit
as shown.
Master unit Active unit
100%
100%
3. Power both units ON, then push the AC ON/
OFF button on both units to turn AC power
ON.
4. Connect devices to the AC outlets on the
Active unit and enjoy twice the battery life.
Note: Do not connect any electrical devices into
the Master unit while in series operation.
UPS OPERATION
The iGen1000s can be used as a temporary
Uninterruptible Power Supply (UPS) to provide
continuous power in case of a power outage.
You can use the iGen1000s AC outlets while
the Power Station is connected to a wall socket
with the AC power supply (the AC power comes
from the power grid, not the battery). When the
power grid suddenly loses power, the connected
device can automatically switch to iGen1000s
battery power in approximately 30ms to ensure
your work is not interrupted.
Note: Do not connect devices with high
uninterrupted power supply requirements.
Please perform multiple tests to conrm
compatibility before connecting devices,
such as data servers and workstations to
the iGen1000s.
NOTICE
Because the AC outlets of the iGen1000s are
in a double blade, ungrounded conguration,
it is recommended to use the UPS function
of iGen1000s for temporary emergency use
only.
WARNING
DO NOT use electric devices with bare metal
when charging to avoid the risk of electric
shock.

12 | Westinghouse Outdoor Power Equipment, LLC
CHARGING
Only charge the Power Station within the safe charging temperature range (32°–113°F (0°–45°C)).
You can power devices when charging. Do not connect an electrical device which requires over 800
Watts of power when charging due to the current capacity of the wall outlet.
WARNING
DO NOT use electric devices with bare metal when charging to avoid the risk of electric shock.
AC CHARGING
WARNING
Do not charge the Power Station immediately after it is fully discharged. For safety, wait 2
to 3 hours for the product to cool down before charging. If you attempt to charge iGen1000s
immediately after a full discharge, the iGen1000s will display as an overheating
protection reminder.
Connect the unit to a 120V/60Hz power supply as shown.
500W Max
Charge Input
3.0 Hours
0-80% charge in 2 hours
0-100% charge in 3 hours
AC cable
VEHICLE CHARGING
Connect the unit to a 12V automotive charger as shown. Start the vehicle before charging.
Car Charger
(96W Input)
<11 Hours
XT60
Connector
Charging 100% time
required

Westinghouse Outdoor Power Equipment, LLC | 13
SOLAR CHARGING
The iGen1000s can be charged with universal solar panels (10-65V DC, 10A max) with a MC4
connector. When the input exceeds 65V, iGen1000s overload protection will be triggered. Excessive
voltage can damage the iGen1000s.
Note: Westinghouse will not provide repair services for any damage to the unit caused by the poor
quality or improper operation of the third-party solar panels, including during the warranty
period.
Connect a solar panel (not included) equipped with a MC4 connection to the supplied MC4 to XT60
conversion cable. Plug the XT60 cable into the unit as shown.
Cable included with iGen1000s
MC4 to TX60
INPUT PORT
SOLAR PANEL
SOLAR Panel
MC4
Adapter
Cable
XT60 Connector
iGen1000s Charging Port
SOLAR SERIAL CHARGING
Connect 1 to 3 solar panels (do not connect more than 3) in series as shown to the MC4 port as
shown. Then, connect to the MC4 to XT60 conversion cable.
XT60 Connector
iGen1000s Charging Port
SOLAR PANEL-21.6V X3
MC4 Connector
iGen1000s

14 | Westinghouse Outdoor Power Equipment, LLC
SOLAR SERIAL AND PARALLEL CHARGING
Connect up to two sets of solar panels in parallel to the MC4 port as shown. If you want to connect
six solar panels, put them into two sets of three solar panels connected in series, then connect the
two sets of solar panels in parallel (parallel cable sold separately). Connect the panels to the MC4
to XT60 conversion cable. Plug the XT60 cable into the unit as shown.
XT60 Connector
iGen1000s Charging Port
* Users have to buy the solar panels and other
parallel connection accessories seperately.
Solar MC4 parallel connection cable
iGen1000s
SOLAR PANEL-21.6V X6

Westinghouse Outdoor Power Equipment, LLC | 15
CLEANING
Only clean the surface of the unit using a dry, non-abrasive cloth. You can use cleaners designed for
mobile phones or computer screens. To ensure adequate cooling, vacuum the fan vents to remove
dust and debris.
TRANSPORTATION AND STORAGE
• Battery life may be reduced if not used for an extended period of time. Discharge the Power
Station to 30% battery life, then charge to 85% every 3 month to prolong battery life.
• DO NOT place the product near a heat source, such as a car in direct sunlight, a re source, or
a heating stove.
• Store the product in a dry environment. DO NOT place the product where it may contact water
or high humidity.
• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product with a battery power level higher than 30%.
• Never store the product in environments below -4°F (-20°C) or above 113°F (45°C).
RECYCLING
Dispose of the unit in hazardous material-specic recycling locations only after a complete
discharge (if possible). Batteries are hazardous chemicals. Strictly follow your local regulations
regarding battery disposal and recycling. Dispose of the unit immediately if it cannot be powered on
after over-discharging.
Always return your used electronic products, batteries, and packaging materials to dedicated
collection points to prevent uncontrolled waste disposal and promote the recycling of materials.

16 | Westinghouse Outdoor Power Equipment, LLC
NOTIFICATION ICONS
The display screen uses the following icons and combined icons to indicate overload and
temperature conditions.
USB-A Overload Protection
USB-A and OVERLOAD icons ash together.
Disconnect all electrical devices and wait 10
seconds before reconnecting.
USB-C High Temperature Protection
USB-C and High-Temperature icons ash
together. Let unit cool before reconnecting.
Product Overload
Overload icon ashes. Unplug all the electrical
devices and restart the unit.
High Temperature Discharge-protection
RECHARGING TIME, Exclamation and High-
temperature icons ash together. Occurs after
heavy battery use. Let the unit cool down
before recharging.
High Temperature Recharge-protection
Exclamation and High-temperature icons ash
together. Charging can be resumed after the
battery has cooled.
Low Temperature Recharging-protection
RECHARGING TIME, Exclamation and
Low-temperature icons ash together. Place
the unit in a warmer location and wait for it
to return to the charging temperature range
before recharging.
Low Temperature Discharge-protection
Exclamation and Low-Temperature icons
ash together. Place the unit in a warmer
location and wait for it to return to the charging
temperature range before recharging.
Overload Recharging-protection
RECHARGING TIME, Exclamation and
OVERLOAD icons ash together. Unplug
charging cable, restart the unit, then reattach
charging cable. If light keeps ashing, contact
Westinghouse customer service toll-free at 1
[phone].
Overload Discharging-protection
Exclamation and OVERLOAD icons ash
together. Disconnect all devices, restart
the unit. Make sure the Power Station can
supply enough continuous (running) and peak
(starting) watts for the items you will power at
the same time.
Communication Failure between Main
Board and BMS
Only the Exclamation icon is ashing. Restart
unit. If the light keeps ashing, contact
Westinghouse customer service toll-free at 1
[phone].

Westinghouse Outdoor Power Equipment, LLC | 17
Battery Cells Failure
The Exclamation icon is on. Try to restart
the unit. If the light keeps ashing, contact
Westinghouse customer service toll-free at 1
[phone].
Communication Failure between Main
Board and AC
AC icon ashes. Restart the unit. If the
icon keeps ashing, contact Westinghouse
customer service toll-free at 1 [phone].
Inverter Output Overload
AC and OVERLOAD icons ash together. Wait
10 seconds, turn AC Power ON/OFF. Make
sure the Power Station can supply enough
continuous (running) and peak (starting) watts
for the items you will power at the same time.
Inverter High Temperature Protection
AC and High-temperature icons ash together.
Let the unit cool down.
Inverter Low Temperature Protection
The AC and Low-Temperature icons ash
together. Place the unit in a warmer location
and wait for it to return to operational
temperature range.
Fan Blockage
AC and Fan icon ashes. Turn off the unit
and carefully clean and vacuum around vents
on both sides. Turn power ON. If icon keeps
ashing, contact Westinghouse customer
service toll-free at 1 [phone].
Car Charger Overload
Car and OVERLOAD icons ash together.
Restart the unit.
Car Charger High Temperature Protection
Car and High-temperature icons ash together.
Occurs when temperature/XT60 Interface is
recharging in a High Temperatures. Wait for
unit to cool down.
Communication Failure
Car icon ashes. Restart the unit. If the
icon keeps ashing, contact Westinghouse
customer service toll-free at 1 [phone].

Service Hotline: [phone]
777 Manor Park Drive Columbus, OH 43228
WestinghouseOutdoorPower.com
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of
Westinghouse Electric Corporation. Used under license by Westinghouse Outdoor
Power Equipment.
All Rights Reserved.
PC10000 Rev 01